Most easiest way to take out overfill engine oil

Поділитися
Вставка
  • Опубліковано 19 лис 2024

КОМЕНТАРІ • 25

  • @peteg8920
    @peteg8920 2 місяці тому +1

    Fantastic tip. Worked perfectly for me and worked much better than a pump that I bought. The great advantage is that you can pump with one hand and hold the drain pan with the other.

  • @jasonramsingh9947
    @jasonramsingh9947 3 роки тому +6

    Thanks a lot dude! This procedure was easy and worked amazingly. So happy not having to jack up the car and drain a little oil the old fashioned way!

    • @sairamk6240
      @sairamk6240 5 місяців тому +1

      You can use Spray bottle cap , more faster

  • @luciddreamer6000
    @luciddreamer6000 3 роки тому +6

    Thanks a lot for your tips and the video!!!! I had exactly the same problem with my 2020 Wrangler that I got recently. Some fu**** idiot had put too much oil (probably 6qt instead of 5qt) during the last oil change. I noticed that that the engine was running very hot during hot weather here in Tampa and there was a strange ticking noise during idle hot engine. I used the same 'pump' as yours and sucked out about a quarter of the oil from the dipstick hole and the oil mark is just above the middle on the dipstick crosshatch range which is perfect. Thanks again!!!!
    PS: The best way to avoid issues like that is to do the oil change by oneself!!!!

  • @migueldelacruz5054
    @migueldelacruz5054 3 роки тому +3

    This is genius! Thanks to you and your pal!

  • @wahidiphone
    @wahidiphone 6 місяців тому +1

    This is MORE effective than the syring method ⭐⭐⭐⭐⭐

  • @nicholaspetre1
    @nicholaspetre1 7 місяців тому +1

    It's only a case if you can really insert this plastic hose inside the dipstick tube. My Honda Accord has a notch in the middle of the channel so nothing can be put there except for the dipstick. Bummer

  • @badarejaz7552
    @badarejaz7552 4 роки тому +3

    I like your solution.. truly helpful.. thnx

  • @smallkancil
    @smallkancil 2 місяці тому

    Thanks for this interesting vid. May I know the measurements of that aquarium hose.... is it InnerDiameter X OuterDiameter = 5mm X 8mm ?

    • @frenky-tan
      @frenky-tan  2 місяці тому

      You need to ensure the pipe matches your own suction bottle, as mine might be different from yours. You can measure the pipe from your suction bottle to confirm.

  • @heli0s2003
    @heli0s2003 8 місяців тому +1

    This is genius

  • @DragonRoyZ
    @DragonRoyZ Рік тому

    Nice trick. That dipstick sucks though. You can't really see the oil mark clearly due to the red color. It should be silverfish.

  • @danielnguyen8933
    @danielnguyen8933 Рік тому

    Hey frenky, is that a 5mm tube 2m long?

  • @devodadon2047
    @devodadon2047 Рік тому

    How you get the syringe without having a prescription??? Helpp

  • @sugarsaint
    @sugarsaint 8 місяців тому

    The RAT garage keep on over filling my car

  • @esinyldz4760
    @esinyldz4760 3 роки тому +1

    super idea :)

  • @imtp70
    @imtp70 4 роки тому +2

    👍

  • @athlonium
    @athlonium 4 роки тому +2

    How come your engine oil overfill like that. Our engine oil bottle only 4L. You already take out more than 500ml 😂

    • @frenky-tan
      @frenky-tan  4 роки тому

      Check yours

    • @athlonium
      @athlonium 4 роки тому +1

      I think ur sc didn't drain the oil properly

  • @spellbreaker6609
    @spellbreaker6609 3 роки тому

    As dirty as that oil was i would of just changed it

    • @frenky-tan
      @frenky-tan  3 роки тому +2

      I would to change too. But my periodic maintenance not due yet. My car consider very low mileages. Here Hyundai service center use Shell Helix Ultra 0W-30 ECT C2/C3, it's very expensive oil engine. Hence we not using dollars as currency. Engine oil will get dirty quickly. Specially 2nd service onwards from brand new car, the new oil will mixed up will old oil in the engine compartment and engine wall, although they already drained the engine oil.