Citroen C5 How To Replace A Clutch part 3 Bodgit And Leggit Garage
Вставка
- Опубліковано 29 жов 2024
- www.gofundme.c...
business and permissions inquires bodgitandleggit@gmail.com
bodgit and leggit garage
tips and tricks inside this video hopefully help you
don't forget get your hands dirty
www.bodgitandle...
bodgitandleggit...
bodgitandleggit...
/ bodgitandleggitgarage
/ bodgitandleggitgarage
Part 3 Citroen C5 clutch
In this part we show you how to reinstall the gearbox drive shaft clutch cylinder Earth straps gear link cables new crankshaft sensor
It's the most satisfying feeling when that splined shaft just goes 'schlonk!and goes in that final inch or two!I find when it's up in position and holding box with your right hand,I have a big blade screwdriver in the gap slightly moving the flywheel while shaking the box to death.
Looking trough older videos. Pure gold it is. Really enjoyed this clutch change episodes :-)
thanks mate
i have to do my clutch plate also for a citroen c5 i gonna do it in my garage next summer. Thanks for the lessons i have enjoy it SORTIT!!!!!! greatings from Holland and keep up the good work en video's.
Marcel Suchan thanks a lot mate much appreciated that's why I do videos to help people out
Good videos I enjoyed watching thanks, they made me realise I really don't have the patience to do this job, I'm a home mechanic & tear my hair out at the first problem seized bolt, also I know your pain working on Peugeot & Citroen's they are crap, you made it look easy compared to my previous attempts, I got to change a rusted fuel tank strap on A Citroen C5 in the next few weeks & even that small job I aunt looking forward to as there's a cover down the one side & all the bolts are rusted on, plus I'll have to work from the floor on axle stands oh why do I keep buying these French bangers!!!
Great vid mate. Must be French car Friday it’s all I’ve worked on today.
VWDiagnostics 60 lol thanks mate and thanks for watching
Easiest way to get a BE4 gearbox in for me is to have car raised just enough for gearbox and jack to go underneath and use a hoist from above. There are two lifting eyes (one might not be a lifting eye but does the job). Use the one nearest to the bulkhead to lift it at almost flywheel height (this helps clear the diff housing from subframe and bulkhead). Support gearbox on jack and shift hoist to eye nearest front of car. Lift with hoist to flywheel height and gearbox will twist to proper orientation. Things are made easier if you remove the (now legacy) speedometer drive housing before removing and refitting the box. Concentrate on the gearbox bolts with the dowels, which should be the one below the starter motor and the uppermost and most tricky to get at, when tightening.
absolutely brilliant video very informative welll done
When I drive around I leave yt playing , and there I was driving past a school , with you in the speakers grunting sayin , Ohhhh did that go in , Oh yeah , oh yeah , that went in ...... It was at that moment I realized the car next to me also had windows down 😂... The look I got was priceless and the headshake even better
New Level Auto that is just brilliant hahaha you might see some flashing lights behind you now and just say a voice from the speakers did it it wasn't me but then they might take you off with a room with padded walls
I hope you refilled the gearbox? Good video mate.
thanks eric o for this channel, great job our kid sorted
MegaGrahamo thanks for coming over hope you enjoy my channel and thanks to Eric
been there bro doing clutches on my own thanks for your time and expertize
David Nelson thank you mate thanks for watching much appreciated
Hi
Good Job man Congratulations , Thanks for sharing .
Please just one question , about the 2 hydraulic Pipe under the Gear box : did you remove the 2 pipes or just move them up ??
I didn't follow it clearly ...
???
Good job! I have had 3 Picasso's now 2 of them petrol a 1.8 and a 1.6 identical engine to that, both had issues with auxiliary belt tensioner pulley that sounded identical to that noise, the 1.8 had the exact same tappet noise as well, dam Citroens! :)
Wow you have three citroens you are committed lol thanks a lot for watching mate
I can carry a transmission from point A to point B... lifting from X to Z, not so much. Thumbs-up for powerlifting strength!
I wish that I could have been there Leon to give you a couple of hands when you were wrestling that gearbox back in. I can remember trying to get an automatic transmission splines to line up and it literally took me an hour to get that thing back in there :) But after you got it bolted in, the rest of the install looked fairly painless. If you film the little issue on the belt side, I'll be looking forward to the video of what you find. Don't work too hard and have a great weekend!
stuzman just get on a plane and fly over here I will have a cold pint of Guinness waiting for you thanks for watching mate
You just never know Leon as my wife has family over in England. That Guinness is a little bitter for me, so you might have to have another flavor for me :) Have a good one!
stuzman you're welcome anytime mate
Absolutely great stuff brilliant
loving all the innuendo in this video Leon lol
Simon Rawle lol thanks mate
Good job in lifting that gear box!!!
Paul Balsbaugh thanks mate thanks for watching
You are a real man because you don't wear gloves,stay dirty even when doing clutch jobs. Sorted !
sorted!!!!
great videos keep them coming :-D that engine hanging like that makes me nervous
Shane Kneeshaw she was not going anywhere she was supported by the cross member glad you enjoyed it thanks for watching
nice clutch video before work 👍😀
Paul Wilkinson lol thanks mate
i feel your pain with this one. used to do alot of clutch jobs a few years ago. working on the ground. now im nearly 30. these days are almost behind me. getting to old for this shit haha.
DIY Carguy the joys of being a mechanic lol
Thanks for the video ... how long did the whole change take ?
Excellent videos! Could you give me some dimentions i would like to fabricate that blue bar you use, its not available here in argentina.
massage on fb mate
Great final part of smelly clutch i was gonna send you some oxygen over to help you get the gearbox in lol
Paul Mayou lol
have you ever put it all back together and the clutch doesn't work???
ps love the channel...another Eric fan from Australia!
thanks a lot for coming over hope you enjoy the channel and thanks to Eric
unfortunately yes I have are you replace Clutches on a couple of occasions and the slave cylinder as soon as I press the clutch broke only happened a couple of times but really frustrating
Yeah...Nah...Maybe you can imagine the throwing of spanners after that lol
it must be hard shaking spanners at a Citroen with a Cosworth teasing you in the corner 😃😃 nice work muscles
Badgertronix it's just a 1.3 with a body kit on it lol
Poor sod that tries that job in the driveway. Well done 👍👍
STEVE ROB thanks mate I've done the jobs in the driveway and on the floor with no lift the good old days not lol
fantastic video
Scott Tanner thanks mate
У меня было полное ощущение, что это я поднимаю коробку. Аж спину закололо.
Citroën biggest heart breakers on the planet
I felt your pain with that gearbox.
lol thanks mate
Those boxes are heavy... You should have given me a call, I would have given you a lift!
One Auto, I did try but when I rang through they told me you was at the VD clinic so I thought I would leave you to it lol
👉👌 😂😂😂😂
He manning gearboxes in is my least favourite job. After watching your video I will leave this awful french stuff to the pro's. haha
shift that big heed oot the way
Absolutely great stuff brilliant