Thank you! I made one from some smaller paperclip and they work. This will save my finger tips from swelling when I remove the keycaps by hand haha. A little word of caution. If you use wrapped paperclips, remove the wrapping! Only paperclips available in our area were all wrapped. It made the paperclip too thick to fit between the key caps.. I stripped the rubber like wrapping about 1cm from the bottom. I used a nail clipper since it was easier to fit.
sorry i’m a year late, but you can pull your spacebar, i’ve always pulled my spacebar a one side at a time because i hate stretching my pullers to begin with. just pull one side up, then the other afterwards, usually it entirely disconnects with one pull of one side but in the case it doesn’t, you just pull the side that didn’t come up afterwards
Your a lifesaver this worked so much better than prying of my old office keycaps with a pair of scissors and a screwdriver! (Well that was to be expected XD) THIS IS AMAZINGG
😲hey brother.. this is a "Very Rare" keyboard layout.. it has a "Big Enter" key and "Big Backspace" key. Which brand is it ?? Plz tell me where can i get it
I'm trying to expand on this to create a version capable of removing a spacebar. Maybe 4 "legs", one for each corner? Or wider ones to completely go over each small edge?
one of the simplest nice looking keycap pullers I have seen
spoken true words
Straight to the point. Love it. No nonsense intros.
A genius! I was stuck on wrapping the last clip to hold them together and didn't finish it. Giving it another go
well this quite is nice but a bit difficult and may take a few tries.
KeebWarriorTony you could also try air hardening clay
jokes on you i did it with clips hands and a wall
Practical, easy, cheap and beautiful. That's what I needed. Thanks, great video. Greetings from Brazil. 🇧🇷🤗
loved the fact how you measured everything
I just watch a 15 minute video on how to make a keycap puller I don't even have a mechanic keyboard
The thing, even more sad than that is you watched a 15 minute video that could’ve been compacted into a two minute tutorial
My keyboard is not mechanical but the key caps are removable. Also, Its spill resistant which is great
Man i love this video not for the keycap puller but how he did all the things was so satisfying for me
now time to search for DIY Paper Clip since I don't have one xD
Couldn't make it as clean as yours but it definitely works
You saved so many people so much money thank you so much good sir I hope the best for you. God Bless ❤️😁
me clicking on this knowing i won’t make it
Finally someone that makes sense.
Thank you
Thank you! I made one from some smaller paperclip and they work. This will save my finger tips from swelling when I remove the keycaps by hand haha.
A little word of caution. If you use wrapped paperclips, remove the wrapping! Only paperclips available in our area were all wrapped. It made the paperclip too thick to fit between the key caps..
I stripped the rubber like wrapping about 1cm from the bottom. I used a nail clipper since it was easier to fit.
yeah same, i removed the wrapping from mine using scissors like a knife
Fantastic video. I made it and it worked and now I feel like a tech mechanic 🤣 thank you!
i think it's perfect and if you see a review on this model of a Keycap puller, it really won't damadge the keyboard nor the keys.
A very nice and easy tutorial, thank you for that. I love this diy keycap puller. i dont wanna sound weird or anything but i love your voice :)
5cm is 2 inches if anyone is confused. Not criticizing btw
1'st one did with my hands- works a bit wierd and is round in shape
2'nd one did with my hands and a brain- works as any other keycap puller
Thx Tim!
sorry i’m a year late, but you can pull your spacebar, i’ve always pulled my spacebar a one side at a time because i hate stretching my pullers to begin with. just pull one side up, then the other afterwards, usually it entirely disconnects with one pull of one side but in the case it doesn’t, you just pull the side that didn’t come up afterwards
You have to either do it your way or make two pullers
This one is excellent!!! I made myself one by soldering 2 clips and and the plastic part of an USB token for the grip.
thanks man I had to get a keyboard and milky yellow switches but if i got a keycap puller it wouldnt fit the budget thank you so much!
didnt have paper clips but had some odd wire lever thing in my drawer i used the corner pull method and it works just as well!
Your a lifesaver this worked so much better than prying of my old office keycaps with a pair of scissors and a screwdriver! (Well that was to be expected XD) THIS IS AMAZINGG
Isn't it too small for the keys or does it work fine?
I think it's small so I made mine with a 2 cm gap
Instructions unclear, I am now stuck on top of mount everest
since in my school we get air dry clay i can make it just by making the rough shape then covering it with clay
😲hey brother.. this is a "Very Rare" keyboard layout.. it has a "Big Enter" key and "Big Backspace" key. Which brand is it ?? Plz tell me where can i get it
tried this and it actually worked ty so much would recommend
okay so i might have made the ugliest one cause i only used my hands because i’m at work but it still functions as needed! thank you!
Mind blowned*
hi nicejob , for enter and space what we can do?
Hands
Just made my own puller following this tutorial. Was pretty easy until the coiling part rip my fingers. Works perfectly though!!
But it was totally worth it in the end wasnt it?
What a beast!! like it a lot
life saver!!!
in my place the shipping cost is more expensive than the puller 🥴
Nice and simple, as all things should be 😌
Thank you! It costed me fingers and 1/4th of dollar
Thanks a lot for this man
my left ear enjoyed this video
I would recommend not using needle nose to flatten the clip but use needle nose for everything els
It works better than my fingers
Please make how to make switch puller please
You sir are a fucking genius. Einstein pales in comparison.
I'm trying to expand on this to create a version capable of removing a spacebar. Maybe 4 "legs", one for each corner? Or wider ones to completely go over each small edge?
can't you just like pull the spacebar out?
@@emimaxim22 fingers are the keycap pullers of nature
@@leonruvalcaba1549 in thats how i did it 6 times before this one but its kinda hard pulling au the letters out
You are a god, thanks for video is very nice
This is so productive cool shit
I added some hot glue to the top to make a nice handle aswell
A true wire wizard
i didnt even need to tighten the coil comepletely since i was gonna use it only once it worked perfectly on my apex pro B)
Are you south African ?
Nice
Mine came out looking like @SS, but it works. Coiling is a pain. I use 2 pairs of pliers, one in each hand. Thanks for the video.
The power of saving money
yo i did it with none of the tools it looks bad but it works
Edit: Thanks for the vid, i was using a ruller and a brcken match before.
te amo señor que dobla clips de papel jaja
man this is hard since i have no pliers
Yo, this looks really cool but I’m having trouble bending them at the right spots and making them straight, any tips?
Thank you
60 keys 1 genius
Brought 1 keycap pulley from China on eBay for a dollar. Found out my half keyboard is membrane and not mechanical.
Great video man. Thank you. Just a bit long though.
Thanks
Wow I like it !! Thks
ty bro it works
wish i could find a paper clip :(
Amazing
THIS SHIT IS SO HARD
Watch at 2x speed.
WOW...
His bending skills are good but his math skills, not so much.
jamais j’arrive à faire ça
Es la punta plana la pinza
Legend
he truly is a legend.
Why u have the shakes bru
Up
15 cm ?! What is that xDDD
dame i need a keycap puller not a hole math lesson