Massey Ferguson GC1723E or GC1725M Sub-Compact Tractor With NEW BH2720 Backhoe
Вставка
- Опубліковано 3 лис 2020
- New for the Massey Ferguson GC Series Sub Compact Tractor is the NEW BH2720 Backhoe. This Backhoe replaces the CB65 on the GC1723E and GC1725M Sub Compact Tractors. Check out the new features then visit your local Massey Ferguson Dealer
If in West Central Missouri come visit us at Vahrenberg Implement just east of Kansas City, Missouri just 4 miles north of Interstate 70 in Higginsville.
Visit us online: www.vahrenberg.com
Facebook: / vahrenbergimplement
If we helped you give a Google or Facebook Review. Thanks for Watching! - Авто та транспорт
Very professional video! 👍👍
Thank you! 👍
What’s the brake out force of the backhoe?
With Backhoes they don't use a Break Out Force Rating. They measure Digging Force. Digging Force with the Bucket Cylinder is 2184# and Digging Force with the Dipper Cylinder is 1541# on BH.2720
@@VahrenbergImplement Thanks for the education and the information 😎🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
Can you do a video on the 1825e with bh3222 backhoe??? Would be greatly appreciated as your videos are excellent to prospective buyers!
If we sell that combination I will do a video.
Great!
so thats what that bracket on the bucket cylinder is for...thought it might be for a work light.
It's for the SMV Sign when the Backhoe is on.
Does the BH2720 backhoe have a wider swing than the CB05 I have with my GC2610? It looked like it might be wider. The CB05 has about a 70 or 80 degree swing from center to side. Thanks!
Specs say 150° Swing for the BH2720
@@VahrenbergImplement Thank you.
can you purchase the 1723 or 1725 without the backhoe for now and buy the implement later?
You can buy GC1723e & GC1725m as Tractor only or Tractor & Loader but you can not add the backhoe later it must be purchased at the time the Tractor is Purchased, Different Seat, Roll Bar, Hydraulics, SubFrame for the Backhoe Models.
A quote for a 1725M with CB 65 backhoe says that the backhoe must be detached before installing the mid mount mower. Is this still true for the BH2720? Why is that necessary? Just curious.
The Backhoe Must be removed because the Mid-Mount Mowers uses the 3 Point Controls to Raise and Lower the Mid Mount Mower and can if Backhoe is on tractor and raise/lower 3 Point you can damage the tractor.
@@VahrenbergImplement Thanks.
Agreed, I wish it could have the mower on like the Kubota or the Deere.
May want to practice before you demo a model… you make it look a lot harder than it really is when you’re fumbling..
I'm not way an expert on Backhoe Operation. I don't get much time to play with them. You want Experts watch Owner Videos. They get to enjoy using them.
@@VahrenbergImplement fair enough…
Does the new backhoe have more break out force than the cb65 and are the hydraulics faster or was it that you had the rpms up
Digging Force with Bucket Cylinder is 2184#, Digging Force with Dipper Cylinder is 1542#
@@VahrenbergImplement so digging force is 300 less than the CB 65? I thought CB 65 was 2475
@@clintoncrawford6231 My Massey quote for a 1725M TLB from July 31 2020 shows the CB 65 stats as Bucket cylinder digging force as 2476lb, and Dipper cylinder digging force as 1748lb. So less force on both for the replacement backhoe. Disappointing since I expect replacement attachments to have equal or better capability than the attachment they are replacing. Of course, I'll probably still buy a Massey if it's capabilities are equal or better than a Kubota BX23s
Thanks for the video! Can the backhoe be removed and a bush hog pulled by this tractor? Thanks in advance.
Yes the Massey Ferguson GC Series Backhoe models come standard equipment with 3 Point Hitch to use with Cat 1 Implements like a Rotary Cutter. Here is video on how to remove/install backhoe: ua-cam.com/video/b606kIu5R8I/v-deo.html
@@VahrenbergImplement Awesome, thank you very much!
Are the steps for removing it the same as the CB65?
Yes, Same Steps for all the Massey Ferguson Backhoes.
Where are you guys located my dealer dosent have this tractor in stock and they dont know when they will get any.
Higginsville, Missouri. Inventory is short this year with sky rocketing demand but dealers can transfer from other dealers.
Is it ok to pick the whole tractor up like that while using the backhoe?
Hydraulics are capable and does not hurt the tractor, loader or backhoe.
@@VahrenbergImplement That is the best way to get a tractor up over a curb or if you get the front end stuck. Lift it up with the bucket and curl the loader.
Cam I put a backhoe on a 2600h?
2600H does not have a Syubframe mounted backhoe but a 3 point Backhoe can be used
I would highly recomend staying away from the 3PH backhoes. Stick with one thats subframed, BHs are hard on the machines.
On smaller tractors the Subframe Mounted is the only recommended installation...due to lift arm strength. As tractors get larger the strength of the lift system and lift arms increase. Like the 2600H series Mr Swanson asked about the 3 Point Backhoe is the only choice on this Heavy Small Utility Class Tractor. We have sold and know numerous operations of Heavy Small Utility and Larger Tractors running 3 Point Backhoes and no issues. All depends on the size of tractor and the construction of that tractor. 2600H series is made for 3 Point Hitch Backhoe.
How deep can backhoe dig?
76" Digging Depth on the BH.2720 Backhoe.
Great video nice looking machine 👍🏻
Thanks 👍 We sell lots of them and hard to keep in-stock. Selling faster than we can get them and keep ordering more and more every year!