1984 ATC 200s Basket Case Revival
Вставка
- Опубліковано 1 жов 2024
- MERRY late CHRISTMAS!!! On this episode of Golden Rust or Bust I attempt to resurrect a 1984 ATC 200s from the grave before Christmas. Merry Christmas everyone and I hope everyone has a wonderful new year……,,,And if anyone can get me a 1965 Buick Rivera with the clam shell headlights like in the movie Roadhouse it’s my dream car😂
Remember to comment, like, subscribe and hit that notification button to see more of my videos.
Thanks for watching
Go check out my friends
Junkyard digs:
/ @junkyarddigs
Junkyard Mook:
/ @junkyardmook
Cars and cameras:
/ @carsandcameras
Jeremy Rhydes:
/ jeremyrhydes
Dylan McCool
/ dylanmccoolvideo
VGG
/ vicegripgarage
American Auto 20
/ @americanauto20
Matt's Workshop
/ @mattsws
Nice work brother! Love what you do. Someday I am going to show up in your neighborhood with some old junker of a machine and make you fix it with me. Lol
I would love that man 😎
@@goldenrustorbust we all would hahaha!!! Shout out to Jeremy from N.H.
Happy Christmas 🎄 John . thanks for all your hard work and educational videos this year
Best to use oil meant for wet clutch.
Happy New Year John and Sorry about the Buick 🤣 The Riviera is one of my favorites also. Love the Clamshell Headlights 👍
On today's episode of Hoarders, we find a 3-Wheeler, and fumigate a basement! Just busting your balls, John😂 Good watch fun times. Congrats on the upcoming nuptials.
I used to have a 200S with the rigid front fork; they really are a ton of fun in the woods. There's just no killing Honda's from that era....or any for that matter.
Stiff hard carb boot trick , throw it in hot water before installing
Merry Christmas! Loved the intro👍🏼
Why do you have so much Coca Cola?!
Hold up... A hiding 90's hatchback Civic Si??? DON'T GET RID OF IT!!!! That is a golden nugget of a car right there even if it's broken, rusty, or crashed. Honda nerds myself included foam at the mouth for those hatchbacks.
I too, am a onesie guy! Onesie powers unite!!! I never knew what I was missing my whole life until I slipped in to that dreamy, soft, warm, god sent garment. I HAVE SPOOOKEN!
Merry Christmas and Happy New Year to you and your family, John.
Happy Belated Merry Christmas 🎅 hope Santa Clause 🎅 brought you to lots of goodies and happiness John also Happy New Year 2023 Ahead To! That Honda 200 1 cylinder motor great machine also bolt up all seat plus back peice plastic up also check tire air pressure and fuel filter also replaced air filter too with metal cannister type ! Hope headlights and brake light works if not replaced bulbs in too! I remember those 3 wheeler back years and want one for Christmas or Birthday gifts bet never happened! Also for Engine Oil use 10w30 No synthetic type of Vavloiline or Castrol GTX white bottle also 89 with 5% Ethonal or 91 octane no Ethonal plus grey bottle STP Total Treatment fuel injection and carb cleaner in fuel tank too each time filled up and bottle of Gasoline Antifreeze to help keep fuel fresh and clean up to 6 months even year too! Change Oil every 3 months to plus gear box also check electrical to and brakes plus clutch also axle fluid even lube chain with clean oil too!
Man them old Honda trikes are amazing. I had a 125 back in the early 90’s. I’m rocking a 1980 Honda XR500 now. Love these old girls so much
On an old shitbox like this it's not a big deal to run it for a bit on automotive oil, but on any bike or quad with a wet clutch you'll want to run motorcycle oil. Motorcycle oil has friction modifiers that help with clutch engagement shifting that car oil doesn't.
Good to know thank you
@@goldenrustorbust Gotchu fam. It's noy the gonna cause any major damage, especially on an old ATC/ATV but for long term use it's always good to use bike oil.
Nice 3 wheeler. I have an 84 200s as well. You should be running motorcycle oil in it though, or your clutch may start to slip. The manual calls for 10w-40 👍
much respect the daily driving of a brown galaxy fan by the bed. the most indestructable fan.
. . . and I thought my Mother was a pack rat. Forget a yard sell, try town square. Joking aside I remember driving my cousins 3 wheeler way back when. Good to see one in such good condition still running amok.
Hey John, happy holidays! Look forward to your videos, the intros are class!
I do the same thing. How old am I again?? 38 OR 39 LOL. That bike was made the year I was born put it that way. Another great video bud.
Brother, I think its time to get the gang back together and clean out your grampas garage. Get that cleaned up so the old guy can get out there and have room to work. You could 100% have him in the video talking you through all the randomness you find. You never know what kind of projects for videos you could find in there! Anyway as always, loved your content and looking forward to the next one!
Love watching. Merry Christmas 🤶 John and.. Happy New year
Nice work, just finished up a Suzuki lt125 myself.
Great job, runs great! You can't kill these old hondas they run forever! My brother had a 250X, was a fun ride!!! His buddy had a Suzuki quadracer 250R, it was a ripper, rode it in pismo Beach once, was a blast!!!
Used some of your UA-cam funds and get a dumpster and clean up some of that mess , HA I'm kinding , no I'm not !
What's the name of the song that you used for the time lapse around the 15:00 minute mark? Because that's a very catchy tune you used lol.
Keep the content coming because this video was great!
I had a neighbor that had a 250x ( it was the racing one) and one of these. I've always wanted them..well I'm gonna have to buy me one.
I know you said we don't ask questions, but what's with all the Coke boxes in the back of the garage?
I have an old Honda three wheeler just like this that I use on my family's farm.It's had a long ruff life but it still runs.
your to silent for a while. hope you feel like puttin back on the good old ripped jeans again and record some vids.
The revival of the puppy exerciser LOL. You made it look easy!
I bought a couple of them back in 84. They were a blast. Good Work!!
Love these. Sounds like the timing chain is making a bit of racket at least in the audio here. May need some adjustment.
If you were to group just a little your channel would be very helpful to allow us watching 👀 🙂
It's missing the rear rack and front rack over the fenders, the one i had also had a hitch bolted around the rear axle housing
I THINK YOU SHOULD DO A VIDEO ON CLEANING THE GARAGE 😳😳😳😳😳😳
Ha Ur dog made me think of wistlindiesels late dog...rip
Congratulations on getting married John. Another great video and I can't wait to see you Junkyard Digs and Wrenchin Redneck out the ripping those trikes through the fields. And did I see right, you use a shotgun shell to top of the gas can...lol...if so, I have seen it all. Have a wonderful New Year
Merry Christmas you word smithing sob 😂🎄🎅
Hello John. Love your channel and content! I just picked up an 84 200 of my own for 200$ haven't even touched it yet though. Its always a delight when you make an appearance on JYD. I cant wait to see more of this kind of content! In fact since you mentioned on JYD that you would be releasing a three wheeler video I have been eagerly anticipating the outcome.
That is a gorgeous example of a three wheeler!! What a survivor!! This was an amazing video!! hope to see more of that machine!!
Thanks man I’m glad you liked the video 😁
Fun project.
@@goldenrustorbust yeah this was awesome!! I was so stoked to see the video was uploaded and it totally delivered!!
Paul at Fab Rats UA-cam is looking for a 3 wheeler
Use the works toilet bowl cleaner in the tank to clean it . Also take a heat gun to the plastic to bring the color back
Kirby vacuum hose hanging in basement.
Congrats on the upcoming wedding!
Me and my dad are fixing up our ATC and we just got done with mine we put new bearings and seals all around and we had to swap a engine because mine is a 1984 200s but the engine are the butterfly screw and destroyed the piston so we put a 185 engine in it and we did the brakes as well . The only thing left is the rear plastic and a headlight. Then we have to do new bearings and seals on my dad's big red and we will be set . I'm from Wisconsin
Awesome man I hope your project comes out great and I hope you create great memories with your father
The gas tank looked like it had Taco Bell for lunch. 😆
My man another great video keep up the great work
Lmao Santa did you dirty we gotta get you a 65 Rivera!
Great video, keep the videos coming 👍
Congratulations on getting married.
MC&HNY! Keep up the content! Find the tank!
That Honda Civic is pretty neat!
Had one too!! Merry Christmas
Great job on the Honda 3 wheeler. Just wondering if you ever got into the law enforcement side of things as your main gig?
Yep that’s my main gig I’m an officer near Davenport ia
I think the seat is off the wrong threewheeler lol
Kevin says those things just wanna run!
Merry Christmas John!!
Great content as ever :-). Happy New Year
Merry Christmas John !
The wonderful world of clutter
Awesome look forward to more videos
Merry Christmas to you too dude.
Have fun New Year's 🎉👍
Merry christmas john,looks like you had a blast giving you n pooch a healthy workout!! Better make that a light beer you was huffing n puffy a bit much,maybe the dog run the atv and you chase alongside it.ok godspeed n prosper!!!snooky pa💥👍💥
Merry Christmas!!
I really like how you shake 🧐
3 wheeler 😎 great video
Such a great vid!
Awesome video keep them coming and a big merry Christmas to you from Christchurch New Zealand. 🤘🤘
So I have a 1987 Big Red that runs and drives it'll run for 10 minutes and then it'll just die you can wait 30 minutes to an hour and go back out and start it up and It does the same thing all over again I know something's getting hot and it has to cool off is what it seems like what are your thoughts on it I'd really like to get it running so I can put it on my UA-cam channel
Well you could have a rich mixture in gas’s and you are fowling the plug . Otherwise what could be happening is the coil could be cracked and it runs fine when cold but then when it warms up you lose spark
Check valves to see if one is tight , coil/ cdi or a gas cap not venting
Merry Christmas
John man you should get some time during the summer and come to East Tennessee so I can take you to Bristol Motor Speedway if no nascar we have one of the greatest drag tracks in the USA
Also you need some superclean for your projects hit me up so you can get entered to win lol
Hahaha for sure man 😄
You finely got it out lol
👍
Man that was a BIOTCH getting that out, Cool Ride 👍 Congratulations on getting Married and I hope you have Many Years of Happiness 👍
FUCK YEAH
Nice save!
What a unit .
🤘
Grandpas rigs are your legacy. Bring them back to life and make utoob Gold!
Cool
That was an awesome revival John!
G R O B
Congratulations on your wedding I'm from Minnesota I hope to meet you and Kevin some day love your videos
Love this show👍🙂
Love to see the old silverodo running
I’ve got a video on it
6:45 what’s with All the coke?
The white powder or the cans 😅😂😂
Hell Yeah, Nice save, plenty of riding left in that old machine
First of all let me say I enjoy watching the channel…. And I’ve owned a 1983 Honda 200 three wheeler for over 20 years now … they will literally run forever…. Keep up the good work
Hey …. I’m also looking for some parts for a 200 if you ever run across any lmk
Where's the mullet?
Gone
Cool John !! Merry Christmas to you and yours !!
Congratulations on your wedding!
Those three wheelers are awesome!