How to Replace Rear Brake Caliper 2012-2016 Subaru Impreza

Поділитися
Вставка
  • Опубліковано 8 вер 2024
  • Buy Now!
    New Brake Caliper from 1AAuto.com 1aau.to/ia/1ABC...
    This video shows you how to a new TRQ rear brake caliper on your 2012-2016 Subaru Impreza. A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle.
    This process should be similar on the following vehicles:
    2012 Subaru Impreza
    2013 Subaru Impreza
    2014 Subaru Impreza
    2015 Subaru Impreza
    2016 Subaru Impreza
    Tools you will need:
    • 10mm Wrench 1aau.to/oVu/1AX...
    • 17mm Wrench 1aau.to/oVu/1AX...
    • 12mm Socket 1aau.to/obtT/1A...
    • 14mm Socket 1aau.to/obtT/1A...
    • 19mm Socket 1aau.to/oagB/1A...
    • Brake Caliper Hanger 1aau.to/oiC/1AX...
    • Pliers
    • 1/2 Inch Impact Gun 1aau.to/osJ/1AX...
    • 3/8 Inch Impact Gun
    • Ratchet 1aau.to/obAh/1A...
    • Torque Wrench 1aau.to/oaEb/1A...
    • Brake Fluid
    • Brake Grease
    • Brake Parts Cleaner
    • Gloves 1aau.to/o5C/1AX...
    • Safety Glasses 1aau.to/oWP/1AX...
    • Silicone Brake Parts Lubricant
    • Drain Pan 1aau.to/ozn/1AX...
    • Floor Jack 1aau.to/o45/1AX...
    • Jack Stands 1aau.to/oTe/1AX...
    • Wheel Chocks
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

КОМЕНТАРІ • 6

  • @TRQ
    @TRQ  Рік тому

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @letsRegulateSociopaths
    @letsRegulateSociopaths 9 місяців тому +1

    You do not want to double washer this (your boss will yell at you, or if DIY you will yell at yourself). Really nice vid. One of the best for this repair.

  • @dannyteet6572
    @dannyteet6572 3 місяці тому

    Amazing, thank you! Great video

  • @gr0mania
    @gr0mania Рік тому +1

    Do you need to remove the brake reservoir cap? Or does it stay on?

  • @stopthephilosophicalzombie9017

    What kind of ratchet/driver was that you were using? Looks nice.

  • @Redpsyclone
    @Redpsyclone 2 місяці тому

    Damn, you can tell the brakes were dragging by how much material is caked on the rims/wheels