If you have Voyager... 만약 보이져를 보유하고 있다면... GEAR DRIVE SYSTEM KIT FOR MEEPO ELECTRIC SKATEBOARD - www.meepoboard.com/products/gear-drive-kit-for-meepo-electric-skateboard?variant=40269578436702
I just took her out for her first gear drive test drive. I have the V1 Voyager. Wow. Feels like a whole nother beast. I never got her up to full throttle. Just. Wow.
looks really cool I'm still more into the flexibility of belts but its a really cool thing for people that want to configure it once and run it with minimal maintenance
very well manufactured gear system. Also the sealing. Just have fear the grease will be out of the gear in some time and be next to the gears. A system that brings the grease back into the gears would be helpfull. Or it needs to be opened to put in grease again.
I wish I could send my Ecomobl ET, its not turning on. I have a brand new battery and ESC for it, I installed them but I'm not a pro at taking apart boards and putting them together. I love riding them though. I would pay you bro, you really know what your doing when it comes to electric skateboards.
*Another build/assembly video* 🤩 I think I want those cable connector holders for my Flow modification 😂 after changin to thinner risers. Don't need it but I want 😂😂 Looks better than my normal connector holders. Really does sound like a mini jet engine 😲 Great to see gear drive on this classic boosted form factor. I still love belt drive though lol but wow, you can use this gear drive with 85mm cags 🤩
If you lived next door, I would have knocked on your door and put a connector holder in your hand lol. Yeah, the drive noise of this GearDrive sounded exceptionally good and was a little different from other GearDrive sounds. And as you say, it's the only gear drive that can be mounted on the front of a truck, gearing that can be mounted on a classical boosted-style board. It's also the only gear drive available for 85mm cagus thanks bro :)
As always, an excellent video with very valuable information. The Gear Drive is interesting and like everything it has its advantages and disadvantages. I think the almost 0 maintenance is a very good reason. All the best!!!
I've been running my Voyager belt-drive since I got it. Another problem, specifically with belt and gear choices is..... There is too limited motor movement to properly accommodate the correct tension! My "small gear" with the correct belt is almost at full motor "extension" when the belts new. By the time the belt is "broken in" I can't get enough tension IN the belt for it to be tight enough! At which point, I can't even use the same belt with the next gear size up, as NOW I can't get enough slack on the motor to get it on! Or, for the "largest" gear, the change the wheel mounts on it {so you need a completely DIFFERENT model of wheels entirely!} but you still come into the same tension issue! THIS is where I have lost-snapped the most amount of my belts!
You are welcome I have been watching your videos for the past few years already, from the earlier experimental electric boards you started making... to all the commercial boards out there you had review. Very good very professional👍🏼.감사합니다
Hey Kami! Thank you for an amazing video and for the DIY information, I'm thinking of buying some ultra X Pro trucks from Tynee for a DIY build. Does the gear drive system fit the tynee ultra X pro trucks? Thank you 🙏🏻
Fantastic review, crashed my Voyager when small stick jammed in belt at 43 kmh, had to replace deck so super keen for this! Looks very high quality, just like your content! Would I need to buy the full kit or just the gearbox using my motors & trucks? THANKYOU!! :)
I like that too :) Actually, as far as I know, customs clearance is difficult in China if grease is applied. The reason was that grease is oil-based and can cause a fire. So other companies have found it difficult. But I don't know how Meepo did it
This one : 2.4 gear ratio(Good top speed even in 12s battery configurations), small volume for smaller diameter wheels to use Acedeck: 2.7 gear ratio (Powerful torque due to relatively large gear ratios than meepo),So, It is not difficult to use a relatively large wheels
It seems impossible because the motor specifications of Envy and Voyager are different. If the motor specifications are different, the amount of power consumed is different, so it is difficult to perform well even if it is replaced.
기어드라이브 장점 - 내구성이 좋습니다. (외부 이물질등을 보호), 관리적 측면에서도 따로 신경쓸것이 거의 없습니다. 항상 균일항 성능을 느낄수 있습니다. 단점 - 부품 가격이 비쌉니다, 고정식 기어를 사용함으로 기어비 변경이 불가합니다. 벨트드라이브 장점 - 부품가격이 비교적 저렴합니다, 단순한 구조로 수리가 용의합니다. 휠풀리교체가 가능하며 기어비 변경이 가능합니다. 단점 - 외부 이물질로부터 드라이브 보호가 기어드라이브에 비해서는 취약합니다. 경우에 따라 벨트 끊어짐, 텐션 조정등 벨트 관리가 상시 필요합니다.
If you have Voyager...
만약 보이져를 보유하고 있다면...
GEAR DRIVE SYSTEM KIT FOR MEEPO ELECTRIC SKATEBOARD - www.meepoboard.com/products/gear-drive-kit-for-meepo-electric-skateboard?variant=40269578436702
the sound of this particular gear drive is amazing
I agree and I liked it.
it sounded more like an electric car :)
I always admire the work of others, but also the workmanship of the manufacturers too. Thanks for opening it up.
Also, the sound is perfect.
Right. These days, it is felt that manufacturers are also trying to show consumers a lot of things.
Thank you for watching :)
I just took her out for her first gear drive test drive. I have the V1 Voyager. Wow. Feels like a whole nother beast. I never got her up to full throttle. Just. Wow.
Thank you for watching and I hope you're satisfied too :)
looks really cool
I'm still more into the flexibility of belts but its a really cool thing for people that want to configure it once and run it with minimal maintenance
I think so too :)
Thank you for watching.
Great presentation! Definitely helped me with the comparisons too!
Thank you for watching too :)
very well manufactured gear system. Also the sealing. Just have fear the grease will be out of the gear in some time and be next to the gears. A system that brings the grease back into the gears would be helpfull. Or it needs to be opened to put in grease again.
I wish I could send my Ecomobl ET, its not turning on. I have a brand new battery and ESC for it, I installed them but I'm not a pro at taking apart boards and putting them together. I love riding them though. I would pay you bro, you really know what your doing when it comes to electric skateboards.
I have to give it to Meepo for making this a very easy swap for someone who isn't too confident. Thank you for the in depth review as usual 😀
Thank you for watching too, bro :)
*Another build/assembly video* 🤩
I think I want those cable connector holders for my Flow modification 😂 after changin to thinner risers. Don't need it but I want 😂😂 Looks better than my normal connector holders.
Really does sound like a mini jet engine 😲
Great to see gear drive on this classic boosted form factor. I still love belt drive though lol but wow, you can use this gear drive with 85mm cags 🤩
If you lived next door, I would have knocked on your door and put a connector holder in your hand lol.
Yeah, the drive noise of this GearDrive sounded exceptionally good and was a little different from other GearDrive sounds.
And as you say, it's the only gear drive that can be mounted on the front of a truck, gearing that can be mounted on a classical boosted-style board.
It's also the only gear drive available for 85mm cagus
thanks bro :)
As always, an excellent video with very valuable information.
The Gear Drive is interesting and like everything it has its advantages and disadvantages.
I think the almost 0 maintenance is a very good reason.
All the best!!!
Thank you for watching too :)
Yeah, I agree. that's a good reason
I've been running my Voyager belt-drive since I got it. Another problem, specifically with belt and gear choices is.....
There is too limited motor movement to properly accommodate the correct tension! My "small gear" with the correct belt is almost at full motor "extension" when the belts new. By the time the belt is "broken in" I can't get enough tension IN the belt for it to be tight enough!
At which point, I can't even use the same belt with the next gear size up, as NOW I can't get enough slack on the motor to get it on! Or, for the "largest" gear, the change the wheel mounts on it {so you need a completely DIFFERENT model of wheels entirely!} but you still come into the same tension issue!
THIS is where I have lost-snapped the most amount of my belts!
I think these boards should come with this and not something you have to pay a lot for afterwards.
Sounds like you’re just poor
@@mochatheaustralianlabradoo7316what a juvenile comment.
Sounds like I know like Ryanair the companies want to sell a lot of extra afterwards.@@mochatheaustralianlabradoo7316
@@mochatheaustralianlabradoo7316sounds logical and you sound like a dick
I think there will be a new voyager comming out with
Lights on the board and also with this gear system.
The voyager xl
Beautiful Meepo Gear-Drive set up. Thanks for the review.
Thank you for watching too :)
You are welcome I have been watching your videos for the past few years already, from the earlier experimental electric boards you started making... to all the commercial boards out there you had review. Very good very professional👍🏼.감사합니다
Just ordered mine today as birthday gift! I'm hoping to find abec adapter for it however to run 100rovers!
Happy birthday and enjoy your ride :)
Hey Kami! Thank you for an amazing video and for the DIY information, I'm thinking of buying some ultra X Pro trucks from Tynee for a DIY build. Does the gear drive system fit the tynee ultra X pro trucks? Thank you 🙏🏻
Hi~ there
No, they don't match. The bolt location of the motor mount is different.
@@KAMiJUINs Thank you so much for checking :)
Looks like it would fit the NLS3 Envy! ill have to compare the measurements you made. 🤞
Make sure to check the size of the motor and the specifications of the motor shaft too :)
Unfortunately you are correct about the motor shaft, it is a smaller diameter for motor shaft to accept the new gear. @@KAMiJUINs
Fantastic review, crashed my Voyager when small stick jammed in belt at 43 kmh, had to replace deck so super keen for this! Looks very high quality, just like your content! Would I need to buy the full kit or just the gearbox using my motors & trucks? THANKYOU!! :)
Thank you for watching :)
Of course, if you have a Voyager, it would be financially beneficial to only replace the gearbox.
one thing for sure caught my attention was so much grease inside unlike ACEDECK' s boards....so frugal😅
I like that too :)
Actually, as far as I know, customs clearance is difficult in China if grease is applied. The reason was that grease is oil-based and can cause a fire.
So other companies have found it difficult. But I don't know how Meepo did it
최근에 엄청 추웠는데 테스트 하시느라 고생하셨습니다^^
네~좀 춥긴 추웠습니다 :)
시청감사합니다~
Like always a mega info video my friend, thank you
Thank you for coming, Brother :)
Nicee bro, thanks for sharing, I had a few questions and you covered them all here
I'm glad it helped you :)
Thank you as always broooo.
Gear drive is clearly the superior system. I like my hubs for stealth but when i buy a new system it's going to be gear drive.
I also hope you try it next time :)
how is it clearly superior ?
Nice gear drive
Yeah, It was :)
Long time no sée👍
Thank you for coming again :)
How do you compare this to the Acedeck element 2 in 1 gear drive kit?
This one : 2.4 gear ratio(Good top speed even in 12s battery configurations), small volume for smaller diameter wheels to use
Acedeck: 2.7 gear ratio (Powerful torque due to relatively large gear ratios than meepo),So, It is not difficult to use a relatively large wheels
i am sure a breaking will be amazing on this system..
Yeah, that was good :-)
Hey kami, great video as always, I was just wondering what speedometer app you used
Thank you for watching :)
the app name is Speedometer from apple app store
Thank you!
Will this work as a plug and play on the meepo envy?
It seems impossible because the motor specifications of Envy and Voyager are different. If the motor specifications are different, the amount of power consumed is different, so it is difficult to perform well even if it is replaced.
Thank you
thank you for watching too :)
Think it would work on other boards like Backfire?
I explained the specifications of the GearDrive box mount in the video. If you have a backfire, compare to it.
@@KAMiJUINs curious if meepo controllers are close enough to the same
Good review broo 😊👍
Thank you as always, Bro :)
Any noticeable difference in battery life?
If you were using a 36T wheel pulley, the range would secure almost the same distance.
is it adaptable on exway x1 max ?
No, I don't think so...
Are they as good as hubs for coasting downhill?
Wouldn't it be enough?
@@KAMiJUINs 😅 true haha.. on flat then coasting okay compared hub or belt? in between?
혹시 기어드라이브랑 벨트드라이브랑 큰 차이가 있을까요??
마지막에 영어라 정확한 해석이 안되요 ㅠㅠ
영상 항상 잘보고 있습니다!
기어드라이브 장점 - 내구성이 좋습니다. (외부 이물질등을 보호), 관리적 측면에서도 따로 신경쓸것이 거의 없습니다. 항상 균일항 성능을 느낄수 있습니다.
단점 - 부품 가격이 비쌉니다, 고정식 기어를 사용함으로 기어비 변경이 불가합니다.
벨트드라이브 장점 - 부품가격이 비교적 저렴합니다, 단순한 구조로 수리가 용의합니다. 휠풀리교체가 가능하며 기어비 변경이 가능합니다.
단점 - 외부 이물질로부터 드라이브 보호가 기어드라이브에 비해서는 취약합니다. 경우에 따라 벨트 끊어짐, 텐션 조정등 벨트 관리가 상시 필요합니다.
@@KAMiJUINs 아하 그렇군요!! 감사합니답
YOU TALK TOO MUCH!