Very good blueprints for beginners, especially for those you haven't touched the designer yet. Two things: - For the Blueprint number 1 you can always make it one foundation bigger (than the designer size) by placing a foundation directly in the middle and then zoop out. - Another very important note here: Don't use to much Signs on blueprints you are going to place a lot, this can tank your FPS but also depends on your machine.
Well, seeing how you start out with a 4x4 designer and belts have of max length of 7, the most time eficient way would be a "centerpart" with belts on a 4 foundation length print; then add 2 copies of 3 foundations long stretches without the belts and then another centerpart simply connect the belts between the two centerparts. I made a full fancy skybridge with elevator stations to suck dry the rocky desert for a big steelplant, using belted-unbelted-belted-unbelted patern of busstyle blueprints
AFAIK the any undefined sort in a smart splitter will lock up if the defined output is full and the input matches. Better to set as overflow instead and have a final stop storage for the excess of sink if not needed.
Loving the tutorials. There is a more condensed way of doing hyper cannon. Put down first hyper connection. Connect a hypertube one space over. With the support. Repeat. Delete every other one. Delete one side of the two. There is two inbetween each. Then attach hyper entrance on the right side. Boom. Compact hyper cannon. Srry hard to explain via text.
I want to use some of these blueprints. How do I use them myself? Do I need to build them in the blueprint designer myself, or is there a way to "copy" without the hard work?
Yes, in my discord there is a link in the chat called # google-drive If you go there download the blueprints you put the into your blueprint folder for the save you want to use them in!
U can place a pillar on top if a foundation then delete the foundation and snap a new one to the bottom of the pillar, that way it will appear a little higher than any other foundations clipping into it without visible difference in height or z fighting
I guess it's okay for different materials, but when you just wanna differentiate between concrete colours it might be enough to offset with fewer pillar manipulations
@@Zn0ZY of cours, I don't think manual placement and customization goes out the window, Blueprints are there for scale and being able to precisely replicate details quickly
Wonderful Info - Thank You! - Now I am older, and a bit slower than before... But can you tell me (or a link even) where to go to get them, they look awesome!
In the video description there is a link to the channels community Discord, in there is a chat called #google-drive where I have put the link, there I have everything from the Blueprints, to factory/city plans to my let's play save files
might be experience talking but once you get a hang of it you can probably place 5-6 of them in 1-2 seconds, making it way faster than zooping, with each being 16 foundations instead of 10, also if you want the logistics floor its even easier because of the bigger snapping area
@@PermacultureGame remember to also stay open to the fact you and me play the game differently, what works well for me might just not be your style, and that's fine :P
Very much appreciate your work. You're giving me so much inspiration man! Thank you! I wish I could support you more than through liking sub and commenting. I do like having my own designed blueprints, but as I said inspiration is priceless!
Heads up, it looks like your timestamps are off in the last couple of chapters. The "Hyper Cannons" are really more like "Bridges" and the "Outro" is the "Hypertube Cannon" section.
If you have downloaded them and put them in your folder that is what's gonna happen. I haven them in nice categories and subcategories in my let's play save but the second I copy them over to the creative world, chaos, and it's the same for everyone else, it sucks and I don't know why CSS hasn't fixed this
35:17 For Hypertube cannons, you can also make a design hooked up to a Biomass Burner for portable use. If you place one, insert one fuel, then dismantle it mid-air, it makes it super nice to get around the world. I currently use Packaged Liquid Biofuel (the Somerslooped Alien Protein return rate is insane), so I just chuck one of those in and launch myself. You can also make variations for vertical, 45°, straight, etc.
maybe, who knows? Would I really have time to get shredded at the gym and also spend hundreds of hours in Satisfactory though? :P And, happy you like them!
I mean I do, the categorization just is not transferred when copying them between saves, so while I have them neatly sorted in my Let's Play, when I copy them over to the Creative Testing, they are chaos. And they will be for everyone else downloading them too.
@@jackblade281 Oh of course, I respect the detail, and the blueprints are helpful, I'd make it myself. It's just, you take 5 whole minutes talking about priority splitters work. I feel as if having a script may help not accidentally saying things the same things multiple times. Like, that it's compact, saves a lot of time, and some things people get intuitively. Like why a conveyor bus is useful. Still, I liked what you said, and I think the explanation helped. Sorry if I was rude, but I think you could greatly benefit from a more precise script. -sincerely Uel
@@samuellees3534 That's fair feedback, I get it often from veteran players. By request of others who have given me the same feedback you have, I put in the extra work to make sure every tips and tricks video has chapters. Timecodes are in the description and while watching you can scrub the timeline for them. But I also have to think about more than the OG players and players who have already watched 100+ videos on this. What if it's the first time they ever play and first time they unlock the blueprint designer and on a search the first video they click for inspiration, information or look for blueprints to try? Then explaining something as advanced as this becomes key. And for those like you who finds it obvious, move to the next chapter ❤you only have to think about your experience, I have over 12000 returning viewers this month alone, and I have to make sure as many of them as possible feels seen and heard. As for scripted videos, I make 3-4 takes of every blueprint scene and use the best one for each. I have also just started making videos. I am working on the quality, and my skill on camera. But you can't expect TotalXClipse, Bitz or Imkibitz level quality, not yet at least.
dood, best foot forward or something you spent the first 2mins on foundations spam? ooOooOoo two sets of foundations ooOooOooOoo now a light? WTF? That was your opening? ok sure.
Very good blueprints for beginners, especially for those you haven't touched the designer yet.
Two things:
- For the Blueprint number 1 you can always make it one foundation bigger (than the designer size) by placing a foundation directly in the middle and then zoop out.
- Another very important note here: Don't use to much Signs on blueprints you are going to place a lot, this can tank your FPS but also depends on your machine.
good tips :P
Belt bus blueprints are cool, but I wish they connected...
same XD
Well, seeing how you start out with a 4x4 designer and belts have of max length of 7, the most time eficient way would be a "centerpart" with belts on a 4 foundation length print; then add 2 copies of 3 foundations long stretches without the belts and then another centerpart simply connect the belts between the two centerparts.
I made a full fancy skybridge with elevator stations to suck dry the rocky desert for a big steelplant, using belted-unbelted-belted-unbelted patern of busstyle blueprints
@@marcovanderspek9476 that pretty much how I do it
@marcovanderspek9476 that's about the only choice we have. Not the worst, but it could be better.
There is a new mod out that connects them
AFAIK the any undefined sort in a smart splitter will lock up if the defined output is full and the input matches. Better to set as overflow instead and have a final stop storage for the excess of sink if not needed.
yepp, which is a problem if I actually manage to fill a container with animal remains :P
Loving the tutorials. There is a more condensed way of doing hyper cannon. Put down first hyper connection. Connect a hypertube one space over. With the support. Repeat. Delete every other one. Delete one side of the two. There is two inbetween each. Then attach hyper entrance on the right side. Boom. Compact hyper cannon. Srry hard to explain via text.
is ok, I made a new version in the stream last night, it is a turbine canon that spins you around until you want to leave :P
@@jackblade281 nice man. Love it.
@@BabyJeus perfect :P
@@jackblade281 on satisfactory calculator website there is a bp called yeethenge 2. Should check it out for ideas on omnidirectional cannon.
I want to use some of these blueprints. How do I use them myself? Do I need to build them in the blueprint designer myself, or is there a way to "copy" without the hard work?
Yes, in my discord there is a link in the chat called # google-drive
If you go there download the blueprints you put the into your blueprint folder for the save you want to use them in!
U can place a pillar on top if a foundation then delete the foundation and snap a new one to the bottom of the pillar, that way it will appear a little higher than any other foundations clipping into it without visible difference in height or z fighting
that is how I made the Z-Fighting blueprint :P
@@jackblade281 You still have a visible height difference
I guess it's okay for different materials, but when you just wanna differentiate between concrete colours it might be enough to offset with fewer pillar manipulations
@@Zn0ZY of cours, I don't think manual placement and customization goes out the window, Blueprints are there for scale and being able to precisely replicate details quickly
@@jackblade281 i mademyself a 4x4 foundation platform blueprint with different z fighting hight offsets for such purposes
You can also create categories and subcategories to help you organize your blueprints. Great Vid btw
Thank you! and yes, I just didnt for this one because I copied over the blueprints from my Let's Play save XD
Wonderful Info - Thank You! - Now I am older, and a bit slower than before... But can you tell me (or a link even) where to go to get them, they look awesome!
In the video description there is a link to the channels community Discord, in there is a chat called #google-drive where I have put the link, there I have everything from the Blueprints, to factory/city plans to my let's play save files
You just solved my hesitation on building a rail network
Awesome! Looking forward to seeing how that turns out :P
Blueprint foundations are terrible at snapping. I feel like it's faster just to zoop, am I missing something?
might be experience talking but once you get a hang of it you can probably place 5-6 of them in 1-2 seconds, making it way faster than zooping, with each being 16 foundations instead of 10, also if you want the logistics floor its even easier because of the bigger snapping area
@@jackblade281 Alright I'll give it another shot.
@@PermacultureGame remember to also stay open to the fact you and me play the game differently, what works well for me might just not be your style, and that's fine :P
@@PermacultureGame once you place the first blueprint, hit 'R' to switch to blueprint snapping and it works crazy quick
@mr.negativenancy5751 Ah I had no idea, thanks!
Very much appreciate your work. You're giving me so much inspiration man! Thank you! I wish I could support you more than through liking sub and commenting. I do like having my own designed blueprints, but as I said inspiration is priceless!
The best support is watching the videos and sharing with your buddies so it spreads like wildfire! It helps me take more of youtubes money ;-)
Great video. Keep it up
Thanks for the support!
Heads up, it looks like your timestamps are off in the last couple of chapters. The "Hyper Cannons" are really more like "Bridges" and the "Outro" is the "Hypertube Cannon" section.
ah, I will have to look at that at some point then XD
the messy spagett!!!
A nice pasta carbonara prepared by 4 chefs :P
Great video
thank you!
Nice blueprints, but they're all super unorganized.
If you have downloaded them and put them in your folder that is what's gonna happen. I haven them in nice categories and subcategories in my let's play save but the second I copy them over to the creative world, chaos, and it's the same for everyone else, it sucks and I don't know why CSS hasn't fixed this
Jack Blades blueprints is top tier. (Paleberries not included)
XD would be impressive if they were
35:17 For Hypertube cannons, you can also make a design hooked up to a Biomass Burner for portable use. If you place one, insert one fuel, then dismantle it mid-air, it makes it super nice to get around the world.
I currently use Packaged Liquid Biofuel (the Somerslooped Alien Protein return rate is insane), so I just chuck one of those in and launch myself. You can also make variations for vertical, 45°, straight, etc.
Got to look into that, for sure :P
Great job ! How can i get access to the google drive ?
In my discord there is a chat called #sat-chat with a pinned post that has the link to the drive! Discord is in my bio and in the video description!
@@jackblade281 perfect. Free or paid access ?
@@djagryn free access :P
@@jackblade281 so cool. Thanks man
nice blueprinting time :D
:P very nice!
Doesn't using that many signs everywhere lag your game a lot?
it has minimal impact for now, the devs have optimized the signs greatly and they have nowhere near the same impact on performance as the used to have
Something is up with blueprints and pipes, they dont properly connect when youre using supports.
Pipes and blueprints are always finnicky, what kind of pipe supports are you using, stackable, floor or wall holes, normal supports?
Did I just find Kumail Nanjiani using a voice changer? Thanks for the factory videos!
maybe, who knows? Would I really have time to get shredded at the gym and also spend hundreds of hours in Satisfactory though? :P
And, happy you like them!
use the ZOOP it mod be better than making foundation BPs
Yea, I make the assumption no mods like that are used
My tip for you my friend is..... organize your Blueprints lol
I mean I do, the categorization just is not transferred when copying them between saves, so while I have them neatly sorted in my Let's Play, when I copy them over to the Creative Testing, they are chaos. And they will be for everyone else downloading them too.
Cool, but king of yap sometimes. -sincerely Uel
I ain’t here for the tik tok attention span, I give extra context and nuance. And that takes some yappin 😊
@@jackblade281 Oh of course, I respect the detail, and the blueprints are helpful, I'd make it myself. It's just, you take 5 whole minutes talking about priority splitters work. I feel as if having a script may help not accidentally saying things the same things multiple times. Like, that it's compact, saves a lot of time, and some things people get intuitively. Like why a conveyor bus is useful.
Still, I liked what you said, and I think the explanation helped. Sorry if I was rude, but I think you could greatly benefit from a more precise script. -sincerely Uel
@@samuellees3534 That's fair feedback, I get it often from veteran players. By request of others who have given me the same feedback you have, I put in the extra work to make sure every tips and tricks video has chapters.
Timecodes are in the description and while watching you can scrub the timeline for them.
But I also have to think about more than the OG players and players who have already watched 100+ videos on this.
What if it's the first time they ever play and first time they unlock the blueprint designer and on a search the first video they click for inspiration, information or look for blueprints to try?
Then explaining something as advanced as this becomes key. And for those like you who finds it obvious, move to the next chapter ❤you only have to think about your experience, I have over 12000 returning viewers this month alone, and I have to make sure as many of them as possible feels seen and heard.
As for scripted videos, I make 3-4 takes of every blueprint scene and use the best one for each.
I have also just started making videos. I am working on the quality, and my skill on camera.
But you can't expect TotalXClipse, Bitz or Imkibitz level quality, not yet at least.
Tip for a follow-up video, please cut out the parts where you are searching for blueprints, I don’t have the patience for that.
thanks for the feedback ^^
Bro change youre account name to 'Daffy Blade Duck'
If it wouldn't mess with the existing branding, I would 100% do it 😹
dood, best foot forward or something you spent the first 2mins on foundations spam? ooOooOoo two sets of foundations ooOooOooOoo now a light? WTF? That was your opening? ok sure.
Sorry, seems the video wasn't your preferred style XD