Jacuzzi Sundance Heat Sensor Replacement | Jacuzzi Watchdog Reset
Вставка
- Опубліковано 4 сер 2024
- Jacuzzi Sundance Heat Sensor Replacement | Jacuzzi Watchdog Reset
In this video, we'll show you how to replace the heat sensor on your Jacuzzi or Sundance hot tub. We will also show you how to reset the jacuzzi hot tub when it's in watchdog mode.
❤ SUBSCRIBE - ua-cam.com/users/VIPPoolsand...
❤ FACEBOOK - / vippoolandspa
🎁TIP JAR - PAYPAL: paypal.me/vippoolsandspas?cou...
Jacuzzi Sundance Watchdog Reset: (Will not work on some hot tubs)
RESET #1
1. Turn OFF power to spa.
2. Ground yourself!
3. Put jumper pin (or a reasonable jumper) on jumper 68 (J68).
4. Turn ON power for 15 seconds.
5. Turn OFF power to spa.
6. Ground yourself!
7. Remove jumper pin.
8. Turn ON power to spa.
---------------------------------------------------------------------------------
RESET #2
1. Power OFF
2. Open up Control Panel and place DIP SW-10 (dipswitch) in ON position
3. Power ON for 10-15 seconds.
4. Power OFF
5. Return DIP SW-10 to previous OFF position and button everything back up
6. Power ON and verify normal operation.
-----------------PAID LINKS BELOW------------------------------
✔ Jumper Pins (Watchdog Reset)
amzn.to/3WrN7Qb CANADA
amzn.to/3vjOJzA USA
✔ Pool and Spa Test Kit
amzn.to/3MegnnZ CANADA
amzn.to/3xx3hhG USA
✔ Pool and Spa O-Ring Lube
amzn.to/3Eq40mq CANADA
amzn.to/3KVn2Du USA
✔ Pool and Spa Wrench
amzn.to/37XbbGz CANADA
amzn.to/3KVn2Du USA
😎 Join this channel to get access to perks:
/ @vippoolsandspas
#hottub #jacuzzi #beachcomber #sundance #balboa
Legal Notice: Any electrical connected to your hot tub or spa should be worked on by a licensed electrician. - Навчання та стиль
If you have any questions, please comment below or join our membership group.
Alright, got a customer with a 2020 J-385. Tub hasn’t been turned on in months. Just filled up and now it’s giving me a “cool overheat gfci trip” upon startup and then kills the power and gfi trips within 3 minutes. I bought the bumpers that you linked.
Just double checking I’ll be doing this correct.
1) Turn off breaker power
2) put a jumper on J68
3) turn breaker back on for 15 seconds, then turn off.
4) remove jumper and it should have reset that message right?
@@thebrotherhood08 Double Message. I just send a message on the first comment.
Hi, I have a J-325 that has no error codes but the temperature is off by 10 degrees. 98degress on screen is actually 108-109 water temperature.
@@robertbatista7164 What year is it?
@@robertbatista7164 Its going to be a high limit, temp sensor or stuck relay. If you had an error code, you could pin point it. Normally it will be the temp sensor.
Thank you ! Very informative. Have a j365 Jacuzzi HT. I a watchdog error H--0H. How do I reset? Do I still need to reset j68 jumper?
Have to fix the problem first. If you have the spa pack thats in this video, use j68. If not, there are 2 other resets for different packs in the video description.
To reset the 5 minute watch dog gfi trip put dip switch 10 on and power up for 20 seconds, then put it back to normal off state and gfi 5 minute tripping will stop
I have a 2014 lightly used Jacuzzi 335 Clear Ray hot tub. It has worked flawlessly until late fall when it would not up to temperature. I winterized the tub and in starting up this year I have the same issue. There are no error codes. Water going into the tub was around 45 degrees. After a day it was up to 65 but that's where it stopped. I replaced the temperature sensor but that didn't solve the issue. I assume I have a heater issue but thought I'd check in here first. Any other checks before I call for heater replacement? Thanks in advance for any suggestions you might have. Thanks for your video work....first class!
Like always, test the volts a d amps on the heater element. It sounds like the element anyway. No error codes and no tripping of the breaker? Does that tub have a pressure switch or flow switch? I can't remember
Silly question but is it in eco mode they only heat up so much if so
That's the easy way ! Do it without draining the spa. Just kidding. Great Video. Btw, you can make a "Temp Sensor key" with a PVC T or PVC elbow so you dont have to use pliers. All you need is heat up the PVC and put an old sensor there until the PVC takes the form of the sensor and thats your key. Works every time. Also, after replacing the temp sensor you are suppose to reset the dipswitch #10 or the message can come back. I think its easier than jumping the board.
Thanks for the advice for the tool. Guess the tool works for Clearwater Spas also?
@@VIPPoolsandSpas I guess. You are just molding the sensor into the PVC. If you send me your email I can send you a picture of the one I have.
@@gabrielmurillo5073 info@vippools.ca
Hello. I have a 2006 Jacuzzi J385 with a 6600-101 LCD board (replaced original a few years ago). I recently replaced a faulty temp sensor and was working great until a Watchdog ---- (4 dashes) message appeared a couple days ago. I have turned off the GFI Breaker and it has not reset the message. Do you know how to reset this model Jacuzzi? Any assistance would be appreciated.
I have 3 different resets for jacuzzi. Depends on the year and model. Check the video description for the resets.
Any imfo on resetting a sundance 880 spa. From watch dog mode
There's 3 resets for Sundance and Jacuzzi. All are the same and should be in the video description.
How do you go about resetting the watchdog on a 2002 J350? Thanks in advance.
That one should be, turning power off for 15mins and turn back on. Depends on the code your getting. What code are you getting?
@@VIPPoolsandSpas I've tried the power off and on. It shows OH for a split second and then goes four dashes to watchdog. I've ordered a new temperature sensor.
I’m having this same problem with my j235 jacuzzi hot tub. 7/21 model
I have jacuzzi j355 and change the overheat sensor but still saying the same thing I have call main dealer and there re-set I need to do could you help me please
All the resets for Jacuzzi are in the video description.
Hello I have a 2 or 3 yo jacuzzi j 480. I have no fault but noticed a difference of about 14 deg between setpoint and actual temperature using a good thermometer. So I set it right now to say 89F. Hot tub reports 89F but it feels hot and I can measure 103F. Any clue? Start with temperature sensor?
Check the wires of the temp sensor and high limit. (MICE). Check to make sure all wires are plugged in on the circuit board the right way. Check if the temp senor and high limit are seated in where they should be.
Just following up on what you found with your hot tub temp issue 2 months ago. Thanks
@@VIPPoolsandSpas i didn't do anything yet. Winters are long in Buffalo but I plan on looking into it this spring
@@buffalofrenchy Have around 20 pools open in Northern Ontario, Canada.
@@VIPPoolsandSpas hello I finally replaced the temperature sensor and no issues. Now my temp reading is correct.
Getting the watchdog error on Jacuzzi J235. Replaced the temperature sensor and stuck at the reset thing
I'm going to guess the year of the hot tub and say to turn power off for 15 minutes and then turn back on.
Alright, got a customer with a 2020 J-385. Tub hasn’t been turned on in months. Just filled up and now it’s giving me a “cool overheat gfci trip” upon startup and then kills the power and gfi trips within 3 minutes. I bought the bumpers that you linked.
Just double checking I’ll be doing this correct.
1) Turn off breaker power
2) put a jumper on J68
3) turn breaker back on for 15 seconds, then turn off.
4) remove jumper and it should have reset that message right?
Jacuzzi changes their spa packs so many times between series that Im not sure about the J385. Does it have the heat tube on the bottom back side of the pack or is it the side heater manifold?
Not worried about the "COOL" or "GFCI TRIP" Its the "OVERHEAT" Im really looking at. Pull filter? Circ pump running? Air lock?
Yeah pulled filter out, all jets and pumps are working completely fine.
@@thebrotherhood08 test the high limit and heat sensors.
It worked! Thank you!
Watchdog in a J385 from 2012 ?? Where do I have to put the jumper
Because Jacuzzi changes their spa packs so many times, Im not sure what pack you have. I do have other videos about the resets for different years and makes. There's only 3 resets. Look in the video description. It might be in there.
How do I reset 2014 j355 watchdog
All resets are in the video or the video description.
How do I reset a J335. I was getting Watchdog error. I replaced the temp sensor. Now I’m getting SN2 error?
There are 3 different resets that I know of. The 2 shown in the description should be one of the 2. SN2 is a sensor 2 issue
My Sundance 780 Palermo. Lights up but won’t start up it’s shows a 356 code and goes to what looks like 8.8.8,
Check the circuit board. Look at the capacitors to make sure the tops are flat. If rounded/bulge, replace it.
Can you tell me how to reset my circuit board for a Sundance Optima 880 2017 hot tub?
Whats the error on the topside controls? I think the reset is turn the power off for 15 plus mins and turn back on or the reset is in the menu of the touch keypad.
There’s no error message now,
It was just about the temp sensor not functioning, now thats gone. But the hot-tub is still heating up really high, upwards of 110 degrees. Wasnt sure if there was a reset. I tried turning it off and back on after about 15 minutes and the message disappeared, but the heat is not correct. I think at this point we may need a new temp sensor. Your thoughts?
@@karlamarcotte1547 Yes. Change the temp sensor and high limit to make sure.
@@VIPPoolsandSpas thank you very much. Ordered the parts. Hopefully this fixes the issue.
Let me know.
any way to reset watchdog on a 2005 J345?
I think that one is (4 dashes or Lines) 1) turn power off for 15mins or so. 2) turn power back on. It should be gone. If it comes back. its something else. Pull filters, make sure water is topped up, make sure the circ pump is working (pump pushing water thru the heat tube).
@@VIPPoolsandSpas TY! would appear its something else... :-( appreciate the response.
@@troyoppie3765 Did you "jump" the pressure switch? You could join our membership group and that gives you other opinions on fixing the problem. Like, emailing pictures or premade videos for private viewing.
@@troyoppie3765 Just following up on you hot tub issue from a month ago. Did the reset work and was it the same for the newer Jacuzzi tubs as your 2005? Thanks
@@VIPPoolsandSpas thanks, I put a meter on the temp sensors and the main one was way off. replacement sensor solved the problem and we're up and running. after deck materials, electrician, movers and everything, the free hot tub only cost us about $900! 🤣
How to reset a Sundance Peyton jacuzzi when it is in watchdog mode?
What's the year ?
@@VIPPoolsandSpas it’s a 2019
Is there a way to reset them?
@@user-fy8sb1jt8s Did you try turning it off for 15 mins and then back on?
I did that didn’t work