How to change Lambretta silent blocks - Shedtune
Вставка
- Опубліковано 19 сер 2024
- A customer brought in an engine to be built up from a bare engine case. First job to get done was the silent blocks (engine mounts) so I could put it into the engine stand to start the build.
Tools needed for the job:
The Complete Spanner’s guide - Lambretta Kit Book (Soft Back)
www.lambrettau...
2 x Silent Blocks (Engine Mounts)
www.lambrettau...
Silent block fitting/removal tool
www.lambrettau...
Adjustable Spanners x 2
www.amazon.co....
Universal grease or some engine oil
www.lambrettau...
Blow torch
www.amazon.co....
REMEMBER, if you do not know what you are doing take it to someone who does.
As always thanks for watching, please give it a like and a subscribe for more content. It's just a bit of fun so dont take things so seriously.
If you would like to purchase some merchandise you can do here:
www.etsy.com/u...
You can find our socials here:
/ shedtune
/ shedtune
/ shedtune
Our Skateboard Mates: wearess20.com - Авто та транспорт
I'm due for another of these jobs soon. I changed the ones in my 1969 GP 200 back when I lived in Poland, in the luggage storage cage in our underground parking area, having dropped the engine down to the floor under the scooter and working sat on me ass. I used my MB engine mount tool, a heat gun and installed genuine 2 hole SIL mounts (wish they were still available). On my current running scooter the right side mount is beginning to sag so new mounts soon. Good tips in your video, gonna watch it again before doing it. Sorry for the long winded post I've had two pots of coffee already! hahahaha!
Glad to be of help and good luck with yours 👍😀
Easy when you have the tools mate, looking forward to seeing this build 👍
Very true…. 👍😀
@@Shedtune_Russ maybe we should do a tools video what’s needed for various jobs….
Nice one, new RT225 kit and my casing was bulloxed, had to buy a UNI one and UNI silent blocks so this is good timing to watch.
Coolio, glad to be of service and hope it helps u out. 👍
mate have you fitted corsa mounts , i had to make a new tool as they are bigger . where the rubber is and the origenal tool wont go over to remove them ....... yes pulled them out cos way too hard
rattles the bike to bits ...ended up with one corsa fast road on the right and a bgm on the left seemed to work fine . stiffer but less vibration . good vid 👍👍
They are std UNI mounts and not corsa mounts. I have a set of corsa mounts in front of me and you are correct they would be too hard for the road. These have been supplied by the customer and will be perfect for what they want.
YES MATE those are fine . i was just asking if you had fitted corsa mounts , for the road i much prefare confort .@@Shedtune_Russ
by the way why is everyone doing 1/8 mile and not 1/4 ???
@@TheSteelweasel it’s a long story but basically, most tracks have been sold or shut down. Only a few 1/4 miles ones still running so it’s either the 1/8th at the mo or wait till Santa Pod for the 1/4. I prefer the 1/4 tbh. The Lambretta’s can keep up with the small frame Vespas then.
what about raf elvington i remember doing flying 1/4 there with NSA@@Shedtune_Russ
That’s a big that you got in your hand 😊 must be from Doms tool 🔨 box, excellent video. Long range fuel tanks, what are the best to fit that don’t split on the welds or spots weld!! is aluminium better than steel?
Funny you should ask that, idea coming soon 👍😀🍻
@@Shedtune_Russ I will send you more information, problem with mine!! Going to Woolacombe, i will pm you when I’m back TTFN 👋
Have fun at Woolacombe, you may see the green shedtune scooter & big Steve 👍🏻
@@shedtune81 will keep a look out and say hello to big Steve
@@shedtune81 didn’t see the scooter, saw big Steve, he’s a big chap 😉 excellent weather except for Sunday
Nice! You don’t refrigerate your mount bush in advance? 🤔😂
I don’t but I suppose u could if u wanted to.
@@Shedtune_Russ the real question is….Do you refrigerate your Jaffa Cakes…..Fuck Yea! I do…
@@Shedtune_Russno room in the fridge....too much beer in there😂
@@calvinhall4878😂🤣💀 🍻
What fecking weirdo puts Jaffa cakes in the fridge 🤦🏻♂️
Shouldn’t you mention left and right hand side differential rubber hardness and that some silent blocks are ‘handed’ du to extra load on kickstart side?
@@sidneybolt1099 nope, it’s a basic guide rather than a full on in depth tutorial. Most people don’t listed when u offer advice lol 😂 they don’t even watch all the video
Yes agreed but just thought it worth mentioning before people go off half cocked so as to speak
@@sidneybolt1099 know what u mean lol 😂