aap esko coding kaise किए है और, mobile se kya करके चलाते हैं खुद से coding kaise kare aur mobile me kon sa aap download कर remote late hai 🙏thora sa detail me बताते तो acha rahta. हम robot bana rahe hai
Hi bro u viedo is so useful but a dout bro is I have did what u said in the viedo but after 5 to 6 seconds the motors are going slow and the Bluetooth is turning off and the Arduino on light is also dimming bro can u plz say bro what is the solution u can only say this bro plzz
I've uploaded the code and i can connect my bluetooth module to the app on my phone. However my problem is, whenever I use commands and try and make it go forward etc the motors are not moving. Anyone know what the problem might be? I've uploaded the code a couple times resetting it each time before trying again. I've made sure to disconnect the bluetooth module before uploading the code and then reconnecting it whenever im ready, also my battery's are not working and i assume thats because its need to be charged should't the car still be able to run if its plugged into my computer because thats a power supply? Would be awesome to get a response within a couple days
Hi friends, I have a problem, when I use 3.7V (2000MAH) × 2 battery then after running for a while the motor driver stops working, after pressing the reset button it runs again for a while and stops but when i use 5 volt power bank then there is no problem, can any one tell the solution for this problem. Thank in advance. 😊
Hello. I used L293D as motor driver. I also made the application myself. But there is a problem that it works at first but then hangs. For example, when I press the forward button, the wheels start to spin and it doesn't stop, so I have to cut the power of the car. By the way, I used 4 batteries (from 1.5 Volt batteries). What do you think is the reason? I checked the connections but couldn't find any problems. I would be glad if you help
I worked out from anther video and got pretty much all of it connected, have the vcc go to 5v and then the gnd to gnd on the board. then you can connect txd to slot 1 and txd to slot 0 and then download the code I managed to get it connected to the app however it is not spinning the wheels so i assume there might be something wrong with the code.
I saw video many times but I didn't get where you have connected those jump wires at one end you have connected bluetooth module but where is other end connected ?
Hi , how can I gather these two commands together: Longitudinal movement and steering. I mean I want to achieve cornering control while car moves. Is that possible, and how can I do that?
Bro no need to give resistor in Bluetooth because nothing will happen I am made and I didn't give any resistor and my car is working osm and instead this vedio go another vedio they will give better knowledge hope you understand 😊
sir my all things are running lights are on but my bluetooth starts and when i connect to app the car runs and the bluetooth disconnects. bluetooth =Hc-05 plzz reply . lots of effort i do Reply plzz fast anyone
that's is voltage divider to supply the Bluetooth, because the Bluetooth modul works on logic 3,3V while the Arduino logic is 5V (so need a voltage divider in order to save the Bluetooth modul, otherwise the modul will get burned)
Wow this is super nice sharing brother
Zamieniona biegunowość na silnikach. Lipnie to wygląda.
How many wire needed
Hi you how copy you pastebin link
very good
i like it
Sir meri car ghumti rehti hai gol gol forward backword command dene pe aisa kyu sir but stop kehne pe ruk jaati jai
I've got one of my student who replicated with modification. Thanks
Great project
aap esko coding kaise किए है और, mobile se kya करके चलाते हैं खुद से coding kaise kare aur mobile me kon sa aap download कर remote late hai 🙏thora sa detail me बताते तो acha rahta. हम robot bana rahe hai
इसीलिए video बना कर बताते thora sa detail me robot ke bare me please🙏 sir.....
يتعذر التعليق لا أعلم .
Hi bro u viedo is so useful but a dout bro is I have did what u said in the viedo but after 5 to 6 seconds the motors are going slow and the Bluetooth is turning off and the Arduino on light is also dimming bro can u plz say bro what is the solution u can only say this bro plzz
Bhai ye kon sir kale kalar ki sheet hai
How many volts battery is required
Also give circuit diagram, of l298 motor driver
Can i use aurdino nano
Hello sir can i youse app in Android to fill code
amazing bro
Thanks bro!
How did you get the app in mobile
sir your code is telling that serial port not selected
I've uploaded the code and i can connect my bluetooth module to the app on my phone. However my problem is, whenever I use commands and try and make it go forward etc the motors are not moving. Anyone know what the problem might be? I've uploaded the code a couple times resetting it each time before trying again. I've made sure to disconnect the bluetooth module before uploading the code and then reconnecting it whenever im ready, also my battery's are not working and i assume thats because its need to be charged should't the car still be able to run if its plugged into my computer because thats a power supply? Would be awesome to get a response within a couple days
That happens to me too. I have tried everything. Do u have any answers yet?
The battery is needed try again after the battery works
use 18605 high quality charging cells
Hi friends,
I have a problem, when I use 3.7V (2000MAH) × 2 battery then after running for a while the motor driver stops working, after pressing the reset button it runs again for a while and stops but when i use 5 volt power bank then there is no problem, can any one tell the solution for this problem.
Thank in advance. 😊
How fix module HC 05 never dinconec in 2 minute with smartphone? Please help me
Bro it is showing an erorr while showing program to arduino
Supper
can you please tell why my car is not working
i did everything but when i connect it with app it wont work . even the tyres are not moving .
Do not use the resistors
bro for this you need adafruit motor library file. It helps in communicating with motor.
Which battery is used to power
Lithium ion battery
Hello. I used L293D as motor driver. I also made the application myself. But there is a problem that it works at first but then hangs. For example, when I press the forward button, the wheels start to spin and it doesn't stop, so I have to cut the power of the car. By the way, I used 4 batteries (from 1.5 Volt batteries). What do you think is the reason? I checked the connections but couldn't find any problems. I would be glad if you help
Can I use 3 no. Of 9 volt battery in Arduino Uno for 12 volt dc motor?
Yes
would two motors work with this code
NO
Good video 👌
Can I use Wi-Fi for this type of setup?
Please suggest...
Yes use mcu node
Yes bro
He not showed how to connect hc 05
Go another vedio
In which web site you kept that code
Can this car model be made into a real car?
Sir used node mcu wi-fi
Why did you use resistance..?. Is it mandatory???
Have a look at this video - ua-cam.com/video/hyME1osgr7s/v-deo.html
what is the best place to buy these equipments from in India?
Contact us.
+923014317539
We are from Pakistan but provide services
Maybe makerbazzar
Where we will get the file on computer for programing Arduino UNO
check the description
what pins did you use to connect the HC05 module (RX and TX) ?
I was wondering the same thing, absolutely no clue, have you found out where to attatch the rx and tx?
I worked out from anther video and got pretty much all of it connected, have the vcc go to 5v and then the gnd to gnd on the board. then you can connect txd to slot 1 and txd to slot 0 and then download the code
I managed to get it connected to the app however it is not spinning the wheels so i assume there might be something wrong with the code.
@@Eli-LM1301 bro can u sent me plzz
@@Eli-LM1301 bascly the 1 and 0 pins are tx and rx and u connect tx to rx and rx to tx
@@Eli-LM1301 hey is there any way to use A0-6 pins for rx tx ?
Dear Sir
Kindly make a video for self balancing robot
You have a small mistake in the code .and wireing of the robot .
how tot connect the bluetooth module to the motor shield??
attached in sabro pin, vcc to S+, ground t S-
For me not working
Hey bro i need ur help
Pls could u help me
I wanna make a project gor my diploma 3rd year
How much is the distance
Hello sir can you tell me where you have connected those jump wires with that bluetooth module
I saw video many times but I didn't get where you have connected those jump wires at one end you have connected bluetooth module but where is other end connected ?
Please sir help me for my project
Why did you require the resistors?
TO CONVERT 5V FROM ARDUINO TO 3.3V FOR THE MODULE
@@engineeringaspirantunoffic2856 el hc-06 no necesita resistencia.
can we do this without adding 2k resistance?
How many motors can we control by using aurdino
4 DC motors
By using Arduino Uno r3 u can control 4 dc motors
mujhse ardiuno ka coding nahi ho raha h pless help me
Hey I have a problem what if it says not in sync
sir, right and left operations are not working. i see the motors are running in the right direction but the car is not turning.
i also have same problem,
and i modified the code and now its works like a charm
if u want the reply me.
I want
The code
@@challasaidharma885 pls help me with the code
Hi , how can I gather these two commands together: Longitudinal movement and steering. I mean I want to achieve cornering control while car moves. Is that possible, and how can I do that?
Can I have diagram
Code kaha type karana hey??
you give me Arduino code. please
Will the code work with an hc-06 instead of an hc-05? Pls answer👍
Yes work
@@areditsvlogs3558 OK thanks..
Θα δουλέψει,και εγώ σε HC-05 το έκανα
@@basilhssarigiannidis6067 ευχαριστώ
@@ΜιχάληςΠετρούτσος-γ3λ Άμα έχεις κάποια δυσκολία ή κάποιο προβλημα πες μου. Ίσως μπορέσω να σε βοηθήσω
Us app ka nam Kay hai
Can you give me Arduino Uno my 2 Arduino Uno are dead and I have to get 1 Arduino
code is not working help pls
Hello, in my code, when I press Amy button on Android, the motor never, shutdown.
Bro which battery did you use and pls tell the circuit diagram
The name of the battery is lithium ion battery
How many volts are carry one lithium ion battery??? I made the project but it is not working because of battery that's why I'm asking.
I did not understood the 1k resiator and 2k resistor installment
Bro no need to give resistor in Bluetooth because nothing will happen I am made and I didn't give any resistor and my car is working osm and instead this vedio go another vedio they will give better knowledge hope you understand 😊
You forgot to attach Bluetooth in video
which is the app you upload
Bluethooth Rc control
Bro code not complying
Add Aff... Library
HC-06 Bluetooth Moudle
What's numbers
give me circuit diagram
It’s work for hc06 bluetooth ?
Yes
Sir coding wrong arhyii hae
Good job...👍
The name of programm using to control the caf
Arduino Bluetooth RC Car
sir my all things are running lights are on but my bluetooth starts and when i connect to app the car runs and the bluetooth disconnects.
bluetooth =Hc-05
plzz reply .
lots of effort i do
Reply plzz fast anyone
Yes I have same problem bro
what is the name of back-ground music
Bluetooh বানাতে কি লাগে
Nice
Sir what is the code of car
Please answer me
bro literally just read the discription lmao, the code is in there
Why Scary music???
SIR GREAT JOB BUT CAN I DO IT WITHOUT SOLDERING PLS TELL AS I WANT TO MAKE THIS AAND IF POSSIBLE TELL US YOUR MAIL SO THAT WE SEND YOU THE PHOTOS
Yeah,you can do it without soldering....
Thanks
Also about the mail
i hava got different mator driver
I did not understood the 1k and 2 k installment
that's is voltage divider to supply the Bluetooth, because the Bluetooth modul works on logic 3,3V while the Arduino logic is 5V (so need a voltage divider in order to save the Bluetooth modul, otherwise the modul will get burned)
Hi Sir, how to add lights and buzzer?
Just add in the code
Can we use the l298?
Wow
Can u help me i can pay u...
Can I use the same method to build a 2 wheel rc?
Yes
Robot kese banye
He did a lot of wastes and also did it in a bad way
At least he made a UA-cam video to help us , how about you do one step by step?
circuit diagram pls
circuitdigest.com/fullimage?i=circuitdiagram_mic/Bluetooth-controlled-car-circuit.png
music drabna tha
Uease you reply this video ok
😍
Bo 2motor video
Please replay me.?.
Is it necessary to connect resistors
Can you send the diagram
Robot kese banye