How To Make A DIY Arduino Obstacle Avoiding Car At Home
Вставка
- Опубліковано 1 лют 2019
- Hello Guys, In this tutorial, I am going to show you how to make a DIY Arduino Obstacle Avoiding Car. So let's get started :)
Subscribe Its Free bit.ly/2WlyA8Y
------------------------------------------------------------
Find electronic components on www.utsource.net/
Utsource is a professional electronics supplier with more than 2 million products, lower price with free shipping.
Here's the Parts List:
(Banggood.com)
1) Arduino Uno - bit.ly/2Fz8M4q
2) Motor Driver Shield - bit.ly/2VWaYsn
3) Wheels (4x) - bit.ly/2suQJEY
4) TT Gear Motor (4x) - bit.ly/2Rtg2G9
5) Servo Motor - bit.ly/2Soq7E4
6) Ultrasonic Sensor - bit.ly/2RzebL7
6) 18650 Li-on Battery (2x) - bit.ly/2CZabQ7
7) 18650 Battery Holder - bit.ly/2sulLwu
8) Male and Female Jumper wire - bit.ly/2su6mfM
9) Acrylic Sheet - (Offline Store)
10) DC Power Switch - bit.ly/2FtyEzs
(Amazon.in)
1) Arduino Uno - amzn.to/35flEXS
2) Motor Driver Shield - amzn.to/30Z9ijj
3) TT Gear Motor and wheels set - amzn.to/31WSD0Z
4) Servo Motor - amzn.to/2IAigNH
5) Ultrasonic Sensor - amzn.to/33fwrQa
6) 18650 Li-on Battery (2x) - bit.ly/2CZabQ7
7) 18650 Battery Holder - amzn.to/33iY4b3
8) Male and Female Jumper wire - amzn.to/2MmRjOE
9) Acrylic Sheet - (Offline Store)
10) DC Power Switch - bit.ly/2FtyEzs
[Flyrobo.in]
Arduino Uno : bit.ly/2m8HZnL
Motor Driver Shield : bit.ly/2mvO7XL
Wheels : bit.ly/2kxPeFF
TT Gear Motor : bit.ly/2m4fMid
servo motor : bit.ly/2MIdoaB
Ultrasonic Sensor : bit.ly/2McGLm1
Male and Female Jumper wire : bit.ly/2mu0aVo
-------------------------------------------------------
Here's the code link - bit.ly/2m6JJhq
Libraries Link - bit.ly/2MbQ9Xi
Circuit Diagram - bit.ly/2MF2Zw7
-------------------------------------------------------
More Arduino Car Related Projects
1) Arduino Voice Controlled Car - bit.ly/2WUdsuR
2) Arduino Bluetooth Controlled Car - bit.ly/2WpYPuX
3) Arduino Line Follower Car - bit.ly/2ZimqPV
4) NodeMCU WIFI Controlled Car - bit.ly/2XA941d
----------------------------------------------------------
Thanks for watching this Video. If you like this video then hit the LIKE button, share it and also make sure you don't forget to subscribe my channel for more upcoming awesome projects.
If you have any question related to this project then let me know in this comment section below :)
Here my social sites:
Facebook: / surajit.maju. .
Instructables: www.instructables.com/member/S...
twitter: / diybuilder1
Instagram : / surajit_majumdar
-------------------------------------------------------------
Background Music:
Bongo by KV / kvmusicprod
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
creativecommons.org/licenses/b...
Music promoted by Audio Library • Bongo - KV (No Copyrig...
Spring by Ikson / ikson
Music promoted by Audio Library • Spring - Ikson (No Cop...
----------------------------------------------------
#DIY #ArduinoProject #SmartRobot
---------------------------------------------------- - Навчання та стиль
After so many videos, the first one tha really covered all the aspects that matter.
u did the thing
?
Ff
POV: You're here because of the research project your teacher gave you
Please
bruhh same i have to make a robot
Yeap
True
I'm doing this for fun and practicing stuff for drones on a car first lol
4 years on, this excellent article still works; built one today for my grandson's birthday. Magic stuff! 🙂
how'd do you do it? mine only beeps but dont move, i already got the libraries and i follow the circuit diagram, can you help me?
@@rodeliodompor4446 Hi, When I first tried it after building, mine didn't move either. What I found was I had the motor connections wrong. You must NOT just connect all 4 motors positive to positive and negative to negative. if you do that, the front wheels are trying to go forward and the rear wheels are going backwards, so it stands still.
On mine. the 2 front wheels have the red/blue wires; the rear wheels have green/yellow. Try reversing the green/yellow connections on the motor drive shield.
I hope this helps.
@@andrewmelville8560 I already tried it but unfortunately it still doesn't move, I tried lifting it up to test if the wheels cancel each other but they still doesn't move
@@rodeliodompor4446 Hi, I am sorry that did not work for you. The only other thing I can suggest is to make sure that the servo connection goes to the right terminals (there are two separate servo channels) - 6:08 in the video.
Hi, a couple of other thoughts have come to mind; firstly - can you let me know if you definitely uploaded the sketch through the Arduino IDE? Did you get confirmation that it had uploaded successfully?
It's been 4 years since this video encouraged me about Arduino. A lot of memories with this. I really impressed what a single development board can do. After that, I continuously watch your videos. I also loved your other robot car videos. You're the best Arduino related UA-camr, atleast for me. Hope you'll continue with new new projects which may be small or big.
Thank you so much for your heartfelt comment, I'm grateful for your continuous support, it means a lot to me. I'll do my best to keep bringing you fresh content, whether it's a small or big project.
Once again, thank you for being a part of this journey with me ❤❤❤
@@DIYBuilder Can I install the code by mobile phone
@@DIYBuildermeans smart phone. Plz reply to my comment
Nice work
@@DIYBuildercan we use a clone compatible Uno board with the same coding that you have provided 😢😢😢
THANK YOU SO MUCH BC IM TAKING ROBOTICS CLASS NEXT WEEK AND THIS HELPED A TON THANKS
Whenever I want to make any project I always watch your channel
Ye sender kaha se milte hai
It’s the best quality among the platform
did you have to download from the link as that site tries to install media fire on the pc and its full of viruses, where did you get the code please
You deserve more subscribers for this amazing content.
This is very easy and it is a good project.I have done this project for my school competition
This is an excellent proyect , thank you very much and greetings from México
it is project
i guy , thanks alot for the video .. for sure this is the best video i have watched so far on youtube about the Robot . man this is really wonderful ,... thanks alot
Thanks :)
@@DIYBuilder it's saying MOTOR12_1KHZ was not declared in this page
Can you help?
Your project work is fantastic
You are very talented 😍
It is really amazing 😍
LOVE YOU BRO THANKS SO MUCHHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!!!!!!!,REALLY YOU'RE THE MAN FROM DEEP INSIDE THE HEART.
Hey can i use 2000mah battery
Hey plz help me
This is the first video which gives a very detailed information. Thank you so much for this
Umar Mobile stolen comment
Why on earth would u copie and paste some one else comment 😂😂😂wtf
ua-cam.com/video/Y8pgWrieLTo/v-deo.html
Awesome project! I just completed mine. 💕💕💕
Hello 👋
Where did you get a code? Could you share it, please?
Nostalgia hits me hard watching this video after so long.
Super. very clear and inspiring
This is the first video which gives a very detailed information. Thank you so much for this .
Iska code hain aapke pas
Code is in description
did you have to download from the link as that site tries to install media fire on the pc and its full of viruses, where did you get the code please
And this is the 2nd
ua-cam.com/video/Y8pgWrieLTo/v-deo.html
@@jaganinilkanth7082 ua-cam.com/video/Y8pgWrieLTo/v-deo.html
The detailing is perfect
Wow amazing work bro👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Amazing work bro, 😎
Cute.. this project can be used in automatic floor cleaners making factories 😊
I Appreciate Your Hard Work
This is very good.
Fantastic 😍
I make it today according to your guide code and library and it's working perfectly. THANKYOU SOO MUCH SIR.
Congrats
@@DIYBuilder can you send me the code please
can you past me the codigo, plis??? I cant downland and i wanna make my robot
Can you send me the code please
Project finished few minutes ago and it works perfectly ! Thanks very much ! :)
Great!
How much money need??? This project?
can you give me code bro
@@DIYBuilder can u give me the size of this sheet
Please tell me how to install the switch
Awesome project I just completed mine ❤❤❤❤❤
Thank you so much for helping us make this project
A perfect tutorial.♥
Hello, can you please provide a diagram of some sort of the measurements between each hole on the wooden board/base so I know where to drill the holes? Thank you
Yes please do that 😔😔
Very good explained. Thanks bro :)
Great and hard work always pays well
The ultrasonic sensor is working when the car is almost dashing, the project is good anyways overall and you did a great work.
Awesome project! I just completed mine. 👍
Please reply coding
send the code broh
Send me the code plz
Awesome project! I just completed mine
Bhai ye kaise chale ga
Awesome project ! I just completed mine.❤❤❤❤❤
Wow❤
Good, The perfect tutorial
DIY builder I really appreciate you you answer my all the questions I love your videos you are best maker hope you reach 10,000,000 subscribers amazing
Thanks bro. Keep supporting
Sure
@@DIYBuilder Bro can i use normal duracell AA battery instead of 18650 battery?
You did a great job. It is really amazing and very helpful.
It is really a great informative video
Glad you liked it
I love how you skipped soldering the 6 prong power switch and went right to showing us how to screw a battery box to a piece of plastic. Real power move
I really liked this project, it is much cheaper and beautiful.
ua-cam.com/video/Y8pgWrieLTo/v-deo.html
Is it cheaper
Looks so good 👍
Simply : RESPECT! 👍
太棒了!It's amazing!
Thank you for the video,I tried it and it works perfectly!
Great to hear!
@@DIYBuilder hello, I have been trying to do but failed can you help me ? My number is 9819836665. A quick call would be appreciated
What program is that?
Please tell software audino in computer
how to get program bro..
Well done, I'll try it.
Nicely done ❤
Wow.. it's really nice ...It's working.... Thank you so much....
Where do you get codes
bro please send the code
@DIY Builder I appreciate your hard work but just a little note - Actually the code that you have used in your build was right but the code in the discription has a MISTAKE - in the line where it is written [If distance R < distance L] should be distance R > distance L as in the next line it is written turn right so as a result due to this mistake the car is turning right when distance L or (Distance Left) is greater it should be the opposite because the car need to avoid the obstacle not to get towards the obstacle so please rectify this
Anyways your videos are amazing 🙂,
Thanks
Is that the only mistake there?
I mean If I use the code in description with changing that detail you mentioned I'll have no problems right?
@@salmaj7607 Yes you will have no problems, by the way I don't know whether @DIY Builder has changed the description code or not but if he hasn't changed you can follow my steps given above and change the code, actually the code is not so difficult just make sure that whatever changes you are doing - the car should avoid the obstacle not go towards it, just read the code once it will make you clear and,
Thanks for your comment
Hey can u help me I Insert the code on Arduino board but I didn't do anything thing what's the problem is there can u tell me???
@@senoritaff2680 Yes you have to change the line in the code which I have mentioned above, just go through the whole code once you will find the line and delete the part which I mentioned and rewrite the line according to my comment and save the code then connect your arduino to your device and re-upload the code and BOOM you are done, if you want to know what's the problem with the original code I have explained it in brief in my comment you can also check other's comments where I have explained them why the original code is incorrect and so on.If you still have any doubts feel free to contact me.
Have a nice day ☺️
Me acabas de salvar tengo que entregar un proyecto y tu me diste una idea estupenda
Finnaly made it thanks
AMAZING, I WANT ONE
rajath rs 😂
Great!
Congratulations for Project.
thanks to you i tried this and working all fine
Nice work bro
It still works ❤❤ I just made it for my collage project
can you send me the program of this project. u made for your clg na so plz help me in that. send me the full program of this project
@@durgasoni2754 just copy the same code as it is in video it will work no ther modification required to work
ok I'll try again
Thanks for this projects it worked i made this
Hi prathathamesh can u tell me how did u make
kitna paisa laga
Bro the code is perfect and it works perfectly . Thank u
Welcome 👍
@@DIYBuilder sir where can I buy the remote u used in this project to control this car?
bro can u please send the code
so excited
It's so good and exciting 😮
This is a very clear cut demonstration / program man, well done
I had no problems with this but once I loaded my libraries, I tried to import them which I shouldn't have done. the code works as clearly as the video demonstrates!
(Maybe state they need to charge their 18650 batteries)
How to load libraries. Is it necessary to upload? Or Arduino code is enough? Pls reply
@@sivagangster I loaded them, and that is all you have to do. Then I ran it and it worked just fine
hey how are you doing, pls help me from where can I find code
@@ahmadhussainwebshare1001 It's in the description
ua-cam.com/video/Y8pgWrieLTo/v-deo.html
Very Nice, Interesting project. The most professional car I've ever seen. And First UA-camr Ever who gives response very nicely and fast. 👍
Thank you so much sir for watching this and i am so glad that you liked my video 😊
Great work 👍
Wow brilliant😮😮😮
Good project...👍
If you are in seminar , and your teacher gave you this project to your group, and when your teacher ask what you can improve in it , say
" This tyres should have torque at an angle 18°,so that it can change its direction easily"
You will be appreciated 👍👍😉😉
Perfect❤❤
Nice job ❤️ 😍
The perfect tutorial
Thanks bro 😊
@@DIYBuilder Need a help .. whether to use NODE MCU or Arduino Uno for making an MINE SURVEILLANCE BOT which consist of Gas sensors , Temp Sensor & a camera working at wi-fi ..
Please it's urgent
@DIY Builder Amazing bro super work👍♥️Die hard fan broo💪
@@DIYBuilder Mister, actually your batteries could support 4 DC motor and Arduino Board????
hey, first of all thanks for sharing the video. and I'd really appreciate it if you answered my question. I did every connection right but the servo is only turning once when I upload it. any clue?
Excited
I really impressed this video
@DIY Builder In circuit diagram, there is given 9v battery. Can we use 9v to motor shield?
I have built this car too, so much fun! Everything works fine, thank you for this amazing tutorial! Thumbs up! 👍👍👍
Great
Does the code worked correctly??
@@shajaratulyakinmihad1889 Yes, perfectly worked! :)
@naMerre how to exactly start this car...I mean I have purchased all the things and I m all set to build it up but I m a little confused in smthing...after making all this how will it start...there's nothing mentioned about that in the vedio about how to start it..??
Pls help
@@jyotikandpal5678 I have uploaded a detailed video about the build. Please check: ua-cam.com/video/8AGNhXb6j5A/v-deo.html I hope it helps! :)
Thankyou sir you helped me a lot
Amazing car instrument nicely
It is working perfectly thank you 😃
Enjoy
@@DIYBuilder bro
L298N module ko maine 5 volt ke charger se power diya to on nhi hua
minimum voltage kitna chahiye
please reply
hello,, can you help me?
below is the error everytime i upload it.... help please
Arduino: 1.8.12 (Windows 10), Board: "Arduino Uno"
Sketch uses 3908 bytes (12%) of program storage space. Maximum is 32256 bytes.
Global variables use 87 bytes (4%) of dynamic memory, leaving 1961 bytes for local variables. Maximum is 2048 bytes.
An error occurred while uploading the sketch
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
@haru haru have you selected the correct board ?
@@siddharthasingh9570 yes... Huhu please help me
Really that's amazing
Ye dekh kar fayda kaya hai
Saman laao lagao bas bangaya
Hame ye karna chahiye ki motor banao phir lagao
Apne parts banao phir robot banao
Darey
You are legend bro
He done an amazing job
Thanks
its working bro!!!!!,its because of your video and your hardwork love you bro (
Vritika GM ....bro u will tried this project
The robot's like:-
Hey I am stuck. Someone get me outta here!!!
Watch my channel on UA-cam hit like also watch my Mars rover landing video is amazing watch it and like also
Amazing Work...😍❤🎉🎉❤
Thanks 😄
Amazing bro,,, we will have opportunity to do so ,,
i loved it bro
thanks bro
Thanks for full link of product and code in discreption
Amazing 🤩
You made my semester project easy, thankyou DiY project ❤️
Its working perfectly 👍
Great bro
@@DIYBuilder Can i run it with 12volts battery
@@zainulabidin3033 how much did it cost u
is there an alternative for the sensor stand???
love your videos love from India :)
Amazing 😍
Amazing job
well that's how wall-e is invented
ua-cam.com/video/F1sTOe-51Vs/v-deo.html
Hi
did you have to download from the link as that site tries to install media fire on the pc and its full of viruses, where did you get the code please
Yoy
Yep
The perfect one
Wow superb 😊
I have made it and it is running cool👍
great bro
Bro what is the total cost??
Yes bro total cost??
Approx 1.5k
Bro iska code compile nai ho ra error dikha ra
I love it! Me and my dad will attempt to make it, but I would like to know, can you attach more sensors, if so how?
You add encoders for wheels, speed control
Go for Arduino mega AT2560 instead of UNO
@@nitinmalhotra1189 OVERKILL
Sir you can make it. You can watch the video for a quick guide.
ua-cam.com/video/KHVrCFko7To/v-deo.html
Amazing project
amazing work
Pls make a video on a robot car which is obstacle avoidance and Bluetooth controlled .....
Pls guies like it if u want that video👇👇👇
@@syedsalmannadeem 😂😂😂😂
Useful
What's the use of obstacle avoidance if it is Bluetooth controlled 😂😂😂
j'aime page "tolati 3D"
@@yashaggarwal3948 yes u true
Hello man, first of all a very nice guide for begineers, I want to know that is this automatic? and what if I want to add more sensors to make a prototype for a parking system for a car?
hi ,did u made it ?
@@imanebertal9985 no
Do you have an idea about this feild I'm new here and I'm about to do it as my graduation project it will an honor to receive help from you, if yes Ill give my what's up contact
Awesome project