Siddhant Chaudhary not if you swap one of the cords around (I think) when I did robotics we had similar things and if you need to make a motor spin the opposite way you would flip the cord around
Pan shots! (of the SkyMule) You, my friend.. have been watching vids on another well known channel ;) This is a well filmed / edited video sir! Very well done.. You've put some time into this :) Cheers!
Thank you!! DutchRC ADVENTURES I try to improve technique with every video and I'm pretty sure its paying off :) It did take a while to edit though. lol. Thanks!
MY FRIEND,I HAVE A QUATION?IMAKE A RC DOZER AND I RUNNING TWO SABERTOOTH,ONE FOR THE MOTORS AND ONE FOR THE BLADE,BUT I HAVE PROBLEM SETTING THEN UP...CAN YOU HELP ME PLZ....HOW I SET A RECIVER TWO WORK WITH TWO SABERTOOTH...
Hey Lewis :-) I found that really handy mate cheers for the share, I had a basic grasp of the odd bit but you filled in a lot of blanks for me here. Like receiver and transmitter need to be compatible, I was under the impression you could use any so that would have been a pain once I started ordering bits :-) I do like that skymule with the extra servos running the under wing release on the payloads and the side hatch looks awesome! proper love that, you say the servo doesn't have enough torque to open the door? its a shame, can you rig a mechanism to the servo and get a bit of extra leverage on it :-) im thinking something like a few bits of c.f. tubing on a hinge or something :-) Your beat plane looks really good, earned its keep, its looks solid but has a good wing span for surface area to cushion on the air and could have a decent payload carrying capability, but with the skymule it does look like it can carry similar weight but you have the perk of the underwing release mechanisms :-) Suffice to say when I come to buying some gear for a test setup I intend to get around to make I will be coming back to this vid for reference first. im not sure which to take yet spectrum of futaba, the futaba fasst transmitter im told gets a good range on it, but I think the hack I want to do to the transmitter I saw done on a spectrum. that hack was wiring the controller up to a pc :-) I thought it would be cool to mount the futaba on the roof and wire it to an xbox controller in my office and see if I can fly it from my desk..its not...going to..work is it.. :-p still sounds fun to attempt no? :-D I look forward to see this skymule flying now! Pilot to Bombardier we are reaching the target!
battonfive Thank you! I could push open the door with a proper setup, the magnet in the door is quite strong though. I will hopefully be able to rig it up with parachutes and things next week. :) Im glad this video was helpful!
+Mason Pedraza I'll have to look into that because I've been wondering the same thing! I would think it would have to correspond to the "Throttle hold" switch or the "F mode switch"
ive been wondering this because i want the same setup as you but i want my gear switch so all im left with is aux1 but i cant get the same transmitter as you cause the transmitter you have is like 200 dollars and i dont have that money so ive been looking at the t-6 and the dx61 but both of those i dont where the aux 1 is
I am very sorry, but I cannot bear any more of the synthetic headache. I made it to 2:38. You may have great information, but you having to talk over that noise is too much. Just do the video and then allow another X number of minutes at the end for those who enjoy the noise.
i picked up a couple airplanes from a swap meet, ive never had to do any of this before, thank you for the tutorial!
I am a beginner to this world and checked out a few videos but your video has helped the most! Thank you for uploading this.
Won't the ailerons move in the same direction if we use a y harness
Siddhant Chaudhary not if you swap one of the cords around (I think) when I did robotics we had similar things and if you need to make a motor spin the opposite way you would flip the cord around
How can you connect 2 servos for ailerons into the receiver if there is only 1 aileron port on the receiver? Please answer thx
+Peak Chair (peakchair2002) You have a Y harness that you plug both servos into, then you plug the Y harness into the receiver.
Do i really need to get a fuckin y harness? Omfg
How can we connect 3s baterry to receiver ? Thank you for the very useful information
Very beautiful video!
Ton of informations and very well edited :)
Have a great week
ABMNS PRODUCTION Thank you very much!
my rx got only 1 antenna, so where and how should i place the antenna? thanks 😃
why doesn't my 72 hz transmitter bind with a NEW esc the servos work but the motor just beeps
Pan shots! (of the SkyMule) You, my friend.. have been watching vids on another well known channel ;)
This is a well filmed / edited video sir! Very well done.. You've put some time into this :)
Cheers!
Thank you!! DutchRC ADVENTURES I try to improve technique with every video and I'm pretty sure its paying off :) It did take a while to edit though. lol. Thanks!
DroneDude It shows buddy! Very well made video indeed :)
very high quality video, learned a lot, gonna get my first pnp plane soon, thanks :), earned a sub
great thanks!
Can you make a vid for a 4ch quadcopter also?
MY FRIEND,I HAVE A QUATION?IMAKE A RC DOZER AND I RUNNING TWO SABERTOOTH,ONE FOR THE MOTORS AND ONE FOR THE BLADE,BUT I HAVE PROBLEM SETTING THEN UP...CAN YOU HELP ME PLZ....HOW I SET A RECIVER TWO WORK WITH TWO SABERTOOTH...
Someone hellp, what do you do if i say I have a frsky reciever with no plug pins? how do i plug the servos in
But if there are 2 cables for ailerons and only 1 port what do you do??
He answered this twice already. Use a Y connector. Plug the servo leads into the split leads, the single end to the RX.
How to connect two servos to one channel?
Stefan Vujic use a y-connector
Hey Lewis :-) I found that really handy mate cheers for the share, I had a basic grasp of the odd bit but you filled in a lot of blanks for me here. Like receiver and transmitter need to be compatible, I was under the impression you could use any so that would have been a pain once I started ordering bits :-) I do like that skymule with the extra servos running the under wing release on the payloads and the side hatch looks awesome! proper love that, you say the servo doesn't have enough torque to open the door? its a shame, can you rig a mechanism to the servo and get a bit of extra leverage on it :-) im thinking something like a few bits of c.f. tubing on a hinge or something :-)
Your beat plane looks really good, earned its keep, its looks solid but has a good wing span for surface area to cushion on the air and could have a decent payload carrying capability, but with the skymule it does look like it can carry similar weight but you have the perk of the underwing release mechanisms :-)
Suffice to say when I come to buying some gear for a test setup I intend to get around to make I will be coming back to this vid for reference first. im not sure which to take yet spectrum of futaba, the futaba fasst transmitter im told gets a good range on it, but I think the hack I want to do to the transmitter I saw done on a spectrum. that hack was wiring the controller up to a pc :-) I thought it would be cool to mount the futaba on the roof and wire it to an xbox controller in my office and see if I can fly it from my desk..its not...going to..work is it.. :-p still sounds fun to attempt no? :-D I look forward to see this skymule flying now! Pilot to Bombardier we are reaching the target!
battonfive Thank you! I could push open the door with a proper setup, the magnet in the door is quite strong though. I will hopefully be able to rig it up with parachutes and things next week. :) Im glad this video was helpful!
Can I have some tips on using AfterAffects for the intros? And you should make a green screen for some nice product shots of things :D
TactonRC Thanks! I use Final Cut so I'm not familiar with after effects. Ive been looking for a good way to make a better into.
on your receiver the aux1 is a button what would the aux1 be on the spektrum dx6i
+Mason Pedraza I'll have to look into that because I've been wondering the same thing! I would think it would have to correspond to the "Throttle hold" switch or the "F mode switch"
ive been wondering this because i want the same setup as you but i want my gear switch so all im left with is aux1 but i cant get the same transmitter as you cause the transmitter you have is like 200 dollars and i dont have that money so ive been looking at the t-6 and the dx61 but both of those i dont where the aux 1 is
Mason Pedraza Hopefully this will help: aeroquad.com/showthread.php?7016-How-to-assign-a-channel-to-a-switch-Spektrum-DX6i-Transmitter
can you link thew reciever
Don't you need to connect two servos. One to each aileron? How do you connect both of them when you have only one aileron port?
Somebody please answer I also need help on this
Isaiah Schwartz use y connector
Thanks man 👨 🫡👍
Can I use aux 1 for flaps?
Yeah I use Auxiliary one for my flaps!
what kind of servos are those, i would like to buy if there is a link
you dont need the computer music
I am very sorry, but I cannot bear any more of the synthetic headache. I made it to 2:38. You may have great information, but you having to talk over that noise is too much. Just do the video and then allow another X number of minutes at the end for those who enjoy the noise.
"-" for annoying music
loose the music