You might opt for 4943 whenever you choose to anodize. It takes anodizing extremely well and can be used on cast alloys or modern 6000 series with equal results
Toujours ce travail magnifique....Et ce bruit de fond original qui ne fait que refléter l'énorme travail réalisé. Tu as quand même eu une petite frayeur pour la vis récalcitrante ???? 😉😉😃
Et ca c'etait apres deux semaines cette vis reste dans une huile penetrante (liquid wrench). Je trouve qu'elle a rien fait. Merci pour les commentaires!
The place I took my stuff too charges per color -- for clear it was $100 for everything I anodized, that included swingarm, sub frame, and a bunch of smaller parts.
@madmarc thanks Marc. I've got a swing arm off to be clear anodised tomorrow. Sanded all the scratches out and finished with red scotch. Did the place that done yours expect you to sand off ALL the old anodising? Or do they dip it in a tank before hand that strips it?
@@MrDogtown22 they dunked it in their special chemical to remove the anodizing. From now on I'm going to have them do that to all my parts before I work on them
@@MrDogtown22 What do you mean by yokes? You mean the cast portion of the swingarm where you install the bearings? The whole thing is anodized. BTW in case you were wondering, the anodizing doesn't significantly affect the tolerance for bearing installation. I measured them before and after the anodizing, and compared them to another swingarm I had that used the same bearings. So there's no need to mask them off.
Would you be willing to restore a swingarm if I sent one to you? I have 3 bikes I'm looking to restore and I have never seen such outstanding work, and attention to detail actually fill welding in defects on aluminum parts. Also you dont just refinish the aluminum, you actually take the additional time to restore the factory anodizing that would come originally. I would be willing to pay for shipping + your labor aswell. You could also get some content out of it?
holy shit thats always amazes me when someone can remember where every nut and bolt goes. i could watch these kind of videos for days. great work
Even your stickering ability is worth a mention. Swing arm looks wicked
😂 Thank you!
Perfect videos!
What a joy to watch.
Thanks Mad Marc.
Sangat sabar dan teliti pengerjaannya 👍
Amazing work, brother !! Watching from Brazil here. Congratulations.
Your making me want a 96 RM250, and I'm a Honda guy!
Cool sticker trick. I will be trying that on the next one. 👍👍👍
I'm glad it was useful!
Most satisfying videos on UA-cam.
Thanks man!
Wow, it's amazing...grettings from germany🙋♂️
Thank you my friend!
The master at work.
Wow this is brilliant!!!
Amazing job
Great job. It looks like you used a silicon based welding wire. Great job correcting it. I got a Yamaha TDR250 one to do.
4043 was the original (poor anodizing reaction), and 5356 was what I used later.
You might opt for 4943 whenever you choose to anodize. It takes anodizing extremely well and can be used on cast alloys or modern 6000 series with equal results
@cj-ef1rp yup. 4943 is my go to rod.
You are incredibly talented
Thanks Jered, you're always very kind!
Wow! Nice job as usual!
Awesome work as always man. Wish i could get this far on my own, dealing with a stuck swing arm bolt that just won't budge 🙄
Haha! Some bikes are notorious for that. Good luck !
@madmarc The grinder be coming out soon 😅
Beautiful!
The bike goddess
Прям смотреть приятно за отличной работой.
Awesome
This RM is gonna look good next to your KX
It's going to be a fun photo shoot!
Respect
Sei un artista....
Toujours ce travail magnifique....Et ce bruit de fond original qui ne fait que refléter l'énorme travail réalisé. Tu as quand même eu une petite frayeur pour la vis récalcitrante ???? 😉😉😃
Et ca c'etait apres deux semaines cette vis reste dans une huile penetrante (liquid wrench). Je trouve qu'elle a rien fait.
Merci pour les commentaires!
@@madmarc
En tous cas ...ça marche 😉
👍👍👍👍
Unbelievable work👌🏼 was it a wire wheel you used to remove the old anodising?
Thanks man, it was a polycarbide wheels. I think those are the best for swingarms.
Hi
What you used to polish?
Because i have 1997 suzuki rm 125 and i need to know what im need to use for this .
Thanks
What did you coat it with so that it doesn't rust?
I had it re anodized clear, like it comes stock
Is this a steel swingarm? And if so how is it not going to rust when left bare?
It’s aluminum and he anodized it so there will be zero oxidation
Brothers, what is this silver grease ?
It's anti-seize.
Was the anodizing expensive??
The place I took my stuff too charges per color -- for clear it was $100 for everything I anodized, that included swingarm, sub frame, and a bunch of smaller parts.
@madmarc thanks Marc. I've got a swing arm off to be clear anodised tomorrow. Sanded all the scratches out and finished with red scotch. Did the place that done yours expect you to sand off ALL the old anodising? Or do they dip it in a tank before hand that strips it?
@@MrDogtown22 they dunked it in their special chemical to remove the anodizing. From now on I'm going to have them do that to all my parts before I work on them
@madmarc yeah will save a lot of time! Do you think the yokes are clear anodised?
@@MrDogtown22 What do you mean by yokes? You mean the cast portion of the swingarm where you install the bearings? The whole thing is anodized. BTW in case you were wondering, the anodizing doesn't significantly affect the tolerance for bearing installation. I measured them before and after the anodizing, and compared them to another swingarm I had that used the same bearings. So there's no need to mask them off.
Would you be willing to restore a swingarm if I sent one to you? I have 3 bikes I'm looking to restore and I have never seen such outstanding work, and attention to detail actually fill welding in defects on aluminum parts. Also you dont just refinish the aluminum, you actually take the additional time to restore the factory anodizing that would come originally. I would be willing to pay for shipping + your labor aswell. You could also get some content out of it?
Thanks Josh but I barely have time to work on my own stuff. And swingarms are really miserable to work on.
👍👍👍👍🤔
👍👍👍