ACURA LKAS FRONT RADAR ADAS CALIBRATION
Вставка
- Опубліковано 17 лип 2024
- 2020 ACURA ILX FRONT RADAR & lane departure calibration step-by-step how to set up target and perform successful adas calibration
ADAS AIMING
Triangle target patent pending by AdasAiming.com - Авто та транспорт
Great info, thank you!
Great Video...
Awesome video
Very informative. Thank you!
Nice!!!
Thanks for sharing the video. Do you have a solution for Collison Mitigation System Problem error as well? It looks like it needs the same logo calibration. I'm not sure if it physically needs to move or the same process you've demonstrated needs to be done. The error was out of nowhere without a collision.
HDS use some OBD2 or something like that??
Can I ask what tools are you using?
hello i need calibrate my acura tlx were you guys are located
Can you send me the Model Name of this Bosch Laser Blaze ?? Thank You
I have Hyundai Tucson SEL 2022 and the radar sensor wasn’t working because of front accident. I replace it myself. Started working normal but only over an hour so I went to the dealership to fix it but instead of fixing the collusion signal back to always on when I turn my car on. I didn’t go to a body shop I just replaced the bumper and the lights. Any advice please?
It needs the variant coding done,then calibration because it’s a new module.
What VCI are you using for the HDS? J2534?
Hi, i'm using mongoose Honda, Drew Technologies Mongoose Plus Honda2
Jack short
having an empty tank does affect the pitch of the vehicle?
or do you compensate with weights?
Hi, yes we have preset weights in the shop to simulate fuel we place it in the trunk prior to performing the calibration,
I have a TLX 2016 and LKAS fails when the whether is hot and works fine when the whether is cold any idea?
Any luck?
Hi, My Acura RL radar cruise works with LKAS but Lane assist steering function does not, could you advise what it could be.
Hi, yes, I've come across that on Honda and Acura no diagnostic codes in the system, but the departure warning is not working. I perform the calibration on the windshield camera and everything came back to life.
hi. i have 2020 acura rdx a-spec.
what kind of calibration target I must use?
Any automotive aiming target works, even the cheap generics
When you take measurements from the wheel center: how are you sure this is parallel with the center line ? Because in my opinion you can put your measuring device anywhere ? I get what you are doing, but not how you are sure of being straight
Hi, in this video, i'm using the center of the two front wheels to measure the distance Where to place the targets in front of the vehicle. The Triangle base lines up with The centerline , Adas Aiming tools targets are all designed to use a centerline To ensure perpendicular with the vehicle,
Adasaiming.com
Is the distance between car and targets same as for radar aiming?
Hi, i'm not sure I think the radar and the windshield targets are both at 4000 mm from the center the front wheel but I can't remember. I did this car over a year ago just log into Mitchell or all data and look up the service manual for the vehicle you working on
Great Video. I have a question. what is the part number for the Blue ruler? and where can I buy it?
These tools are patent pending and soon be available at adasaiming.com
Thank you
hello and thanks for the information. Do you have to do both the static and dynamic calibration? Will it work if you only do one or the other?
Hi, some of the older Honda Acura's you had to do the static and dynamic. It depends on the model and year that practice follow the instructions in the service manual for the vehicle you're working on.
Thank you,
Hallo sr
Where can I take my car to get this done?
Hi, not sure who is available in your state or local area here or some local companies
www.Astech.com Mobile automotive service solutions MASS www.masscharleston.com Elitek vehicle service www.elitekauto.com