Great instructions Jack. Ive been doing mobile ADAS since it starting showing up in production since i was a mobile diagnostic tech. You are the most direct , clear, and well speaking educator ive seen.
Dig the custom equipment. I think you need an easier way to adjust the angles up and down, however. Maybe an angle gauge that's more permanently attached to the plate, or a 1,2,3 knob like the OE tool.
Hi , thanks , this is a prototype , we have been testing it over 1000 cars for the last two years , The retail packaged ones have machine pivots for 3° angle max upper down,
Is this possible to do solely with VCDS on the Mk7.5 chassis? The ones that snap the sensor into the grill with no available adjustments, I have a 2019 GTI that is out of calibration already a few months after the dealership calibrated it.
Hi Jack. i have panamera and im trying to configure my acc. Is there target same size for porsche? Is the angle is same or maybe its one degree? thank you
Hi, yes, the target size is the same, the angle and the instructions of how many degrees to tilt the target is in the service manual I am not sure on the Porsche panamera it's not a common vehicle in my area
I've watched two videos. There's a VW Golf with ACC I want to buy but the ACC is saying the same error message. Think it was involved in a front bumper collision and might need a recalibration. Not sure how much a UK dealer will charge to fix. Need to do some Google searches and see if it's worth it or just find one that's working. But at £7,700 it's a great deal
Hi, Yes I have successfully coded and calibrated secondhand radar's on Volkswagen, You would have to read out the coding from the original radar and transferred to the used one then performed the calibration,
@@ionbargan4863if you have Odis with an online account. Then when you go thru the scan, and it calculates the test plan, it will see the used radar module has the wrong coding and will add it to the test plan in odis.
Hi Jack, what do you think about mobile ADAS or mobile automotive locksmith? Im trying to decide between the 2. Is mobile ADAS worth it or you recommend having a shop? I thought about ADAS because there is a lot of mobile locksmith out there and ADAS is something that is growing but im not sure about going mobile with ADAS. Can you give me some advice please thank you.
Hi . ADAS Is a great money making business if you have the knowledge and skill you'll be very successful, as a mobile ADAS tech you'll be restricted by travel time and set up space at your customers shop, Some equipment is quite large such as the floor mats for 360 cameras, Mobile locksmith is a good Business but your clients are used car dealers and auto mechanics or retail customers, so I would say ADAS is a much better choice, $$$
Thank you for your time I really appreciate it. I am an airplane technician but im not working right now I want to do something different. I now how to work on cars but I don’t have the knowledge on that field. I can learn fast. I should go work for a shop first right?
Hi Jack Short, my name is Leandro Marco, Brazilian, I don't speak English. I'm using the translator. I would like to know how to assemble this ADAS alignment tower. If you have a construction manual, if you can help me with this information. Grateful for the attention
Hi, thank you for letting me know I remember years ago when I first signed up with VW Audi it was 700 a year, Still not bad I just renewed my Genesis subscription $1500 for one year,
Hi, The front target plate has no holes they are mounting screws those are the black small circles on the front plate, this target set up is just a prototype,
Great instructions Jack. Ive been doing mobile ADAS since it starting showing up in production since i was a mobile diagnostic tech. You are the most direct , clear, and well speaking educator ive seen.
EXCELLENT tutorial, thank you for posting this fantastic video, very helpful , please post more. Bless.🙂😇
Awesome video.
Hello we have a 2018 a5 sportback quattro need to align the "misalignment" code c110300 can this ve done without align board?
I have a a6 it has two radars... How do i do it? By the way .. how do i get a plat like that? And a degree meter? Thanks
Dig the custom equipment. I think you need an easier way to adjust the angles up and down, however. Maybe an angle gauge that's more permanently attached to the plate, or a 1,2,3 knob like the OE tool.
Hi , thanks , this is a prototype , we have been testing it over 1000 cars for the last two years , The retail packaged ones have machine pivots for 3° angle max upper down,
Where can I get Odis subscription to buy ? Thanks great video 🙏🏾
Is this possible to do solely with VCDS on the Mk7.5 chassis? The ones that snap the sensor into the grill with no available adjustments, I have a 2019 GTI that is out of calibration already a few months after the dealership calibrated it.
Thanks alot ❤❤❤
Well done
Hi Jack. i have panamera and im trying to configure my acc. Is there target same size for porsche? Is the angle is same or maybe its one degree? thank you
Hi, yes, the target size is the same, the angle and the instructions of how many degrees to tilt the target is in the service manual I am not sure on the Porsche panamera it's not a common vehicle in my area
Nice video, tho i think you meant to say centimetres not millimeter
I've watched two videos. There's a VW Golf with ACC I want to buy but the ACC is saying the same error message. Think it was involved in a front bumper collision and might need a recalibration. Not sure how much a UK dealer will charge to fix. Need to do some Google searches and see if it's worth it or just find one that's working. But at £7,700 it's a great deal
Hi Jack, is there any way to code a second hand radar without knowing the new coding or vin number?
Hi, Yes I have successfully coded and calibrated secondhand radar's on Volkswagen, You would have to read out the coding from the original radar and transferred to the used one then performed the calibration,
Unfortunately I don't have the old radar
@@ionbargan4863if you have Odis with an online account. Then when you go thru the scan, and it calculates the test plan, it will see the used radar module has the wrong coding and will add it to the test plan in odis.
Thanks for replying back, I have it sorted, I found someone and get it coded with vcds
@@ionbargan4863 awesome 👏
Hi Jack
Thanks for the good explanation.
Was it possible that you could help with dimisions on the radar target?
Then I will make one myself.
hi The target is a solid aluminum 14 x 14"
@@adasaimingbyjackshort2123
Thanks.
You are good at explaining how it can be done!
Once again, thank you
Thank you
Hi Jack, what do you think about mobile ADAS or mobile automotive locksmith? Im trying to decide between the 2. Is mobile ADAS worth it or you recommend having a shop? I thought about ADAS because there is a lot of mobile locksmith out there and ADAS is something that is growing but im not sure about going mobile with ADAS. Can you give me some advice please thank you.
Hi . ADAS Is a great money making business if you have the knowledge and skill you'll be very successful, as a mobile ADAS tech you'll be restricted by travel time and set up space at your customers shop, Some equipment is quite large such as the floor mats for 360 cameras, Mobile locksmith is a good Business but your clients are used car dealers and auto mechanics or retail customers, so I would say ADAS is a much better choice, $$$
Thank you for your time I really appreciate it. I am an airplane technician but im not working right now I want to do something different. I now how to work on cars but I don’t have the knowledge on that field. I can learn fast. I should go work for a shop first right?
Hi Jack Short, my name is Leandro Marco, Brazilian, I don't speak English. I'm using the translator. I would like to know how to assemble this ADAS alignment tower. If you have a construction manual, if you can help me with this information. Grateful for the attention
Hi this alignment tool is available for sale and shipping soon at adasaiming.com
Hi
Can help what is the dimensions of mirror?
Hi , the target is 14 x 14"
Hello. Please help me with the dimensions of the aluminium target. How big it is . Vw Passat
Does it matters?
Hi ,its 14 inches by 14 inches
Odis is 900 per year for each brand not 700 for both.
Hi, thank you for letting me know I remember years ago when I first signed up with VW Audi it was 700 a year, Still not bad I just renewed my Genesis subscription $1500 for one year,
The wholes on the target what are those for?
Hi, The front target plate has no holes they are mounting screws those are the black small circles on the front plate, this target set up is just a prototype,
@@adasaimingbyjackshort2123 thanks for the info, how thick is that target plate?
Hello! Can i get a contact form from you? Best regards
Pos 1 = 88 degrees
Pos 2 = 90 degrees
What about pos 3?
Hi,
88° opposite direction 90° is positioned 2 88 up or 88 down is position one and three following the manufacturer service manual