No doubt Brother 😱. I was hitting tiny dirt jumps with my brushed Tamiya in the mid 80's as a kid. Those were massive for us at the time 🚀🚀👀. Crazy how much improved today's rigs truly are. 😎💪👊👊
@@richduperbash2966 It’s amazing to think back then when the Tyco / Nikko buggy jumped like 2’ everyone was like Oh that was awesome then you run into the house to plug in the wall chargers! Wait like 10hrs! Lol and do it all over again… It’s strange to some to think that bit of enjoyment from the old RC’s to what we have today and the same enjoyment it still brings.
Gonna have to make your channel a drinking game with you saying nice every 2 minutes! Every time you say nice everyone take a drink! Lol! Love the awesome bash session!
Thanks so much Kimberly 😊!!!! This combination of upgrades has really proven itself 👀. It blows me away how tough these ARRMA's are with them 💪. Hope you get back to the track soon 🚀. I'll definitely be watching 😍🤘🤘😎💪👊👊
@@richduperbash2966 So Rich Are those voltage hobbies Chassis braces or M2C on your Kraton? You think there the best? Planning some upgrades for my v3 and I'm thinking M2c towers eventually but Voltage or M2c braces right away. Which braces you prefer? I know there both way better than stock.... But is the one that is more solid?
@@Dmac13131 I'm running both Voltage and M2C between my V3-V4 Kraton's 👍. Both are great overall. The rear M2C tower support braces have an advantage in protecting the rear bulkhead. The M2C towers also have more material. I can't fault either design. It comes down to preference I think. 🍻😎💪👊👊
@@richduperbash2966 appreciate that Rich In the grand scheme of things, I would assume some parts should stay Plastic (Arms, wings) as they need to exorb impact and flex(enter RPM), while other (chassis and towers) need to be rigid (metal braces etc). If everything is metal that's no good. Yeah I see there is some drilling needed for the M2c chassis support braces, assuming that adds some stability or mounting points?
@@Dmac13131 definitely need a good mix of plastics and metals 👍. Drilling the towers is easy. You use the brace holes as your guide and Mitch sends you a bit. It adds considerable support and directs energy to the chassis if you take a tower hit with a tail landing or brutal roll. 👀
That was so intense man! That was a step above everything, double and triples both ways, insane landings, near misses, just insane. Great control of those tanks! Rough spot with smooth airs sir! Can’t believe you had no breakage with those multi-story landings... Thanks for putting this out, made my day Rich!
You are absolutely in my element here. This is where the wife and me bash. Takes about 20 mins to get there. Gravel and Sand pit. Right on the river. It's always amazing and awesome. I love the gravel. Don't have the BMX like you but we have this here in Iowa. Popular spot too. They redid our skate park as well. I took our Grandsons there to drive the Granite and they just destroyed it, LOL! Highest jumps I've seen yet with that little beast. Just have to get down to Des Monies to pick up a couple of things I missed when I started the repair. At least they have the parts unlike my plane that's waiting on the Wing from you guessed it, China. Don't know when it's coming. Got my Talion so I'm good running 6s in it. Great to see you in a gravel pit. They are truly fun except when a big one gets stuck in the main Gear. Fun Video Rich!
Thanks Brother 👊!!!! I'm super excited too 👀. It's quite sketchy as is. The air potential is fairly insane 😱. We're hoping to build up some FMX style ramps too 😁. We might need to space out some dirt landing pads or situate some transfer jumps. This place has HUGE potential for sure. 🍻👍👍😎💪👊👊
Thanks so very much Brother 😊!!!! This spot gets me so pumped 😝🤘🤘. Such a Blast to bash 😍. The upgrades definitely bring these ARRMA's to the next level. 🍻👍👍😎💪👊👊
Awesome Rich!! You guys had some crazy take offs on that lip 😱😱😵😵🤪 Looks like your reflexes were put to the test lol! Love how you send these things bigger and bigger! M2C shock caps seem to be close 😍
Thanks so much Aaron 😜!!!! Really wished I'd brought my metal rakes and shovels. Didn't think about it cuz this was a last minute bash with lengthy commute time. Definitely tested the reflexes and made for some Crazy takes offs 👀🤣🤣. M2C shock setup is working out Killer. 👍👍😎💪👊👊
KILLER bash brother Rich!!😜😳🤘That place is sweet for full sends and getting crazy!!😍Man I need to move to Cali so I can have some epic bash spots dang!🤣The Outcast did killer and then the beefcake sending tank stole the show!! Simply amazing what these upgraded Arrma's will endure! Waiting on my M2C to show up for my old Noto/Outcast rebuild! Absolute great show and vid bro!!!😎👊🤘🤘🍻
Thanks so much Eric😜!!!! Brother we'd be bashing the snot out of these spots together 👀. The beefcake Kraton is absolutely perfect for this Crazy pit 😍. Hopefully start reshaping mounds again and placing Mega ramps soon. The Outcast did great overall 👍. M2C caps and pistons should be releasing anytime. Hope your chassis shows soon Brother. I'm still amazed the beating these upgraded ARRMAS can handle 🤣🤣🤘🤘😎💪💪💪👊👊
Love construction site bash brother. Having different types of terrains makes for some awesome interesting bash for sure. You guys had some very close call there LOL 😲😬😱😂😂. Getting some Big airs off of that gravel Mount. Awesome bash guys 👍😎.
Thanks so much Chris 😜!!!! Definitely had some wild moments out there 😱. This spot has wicked potential with a bit of shaping 👌. We have some ideas bouncing around to make it a next level basher's paradise 😍👍👍😎💪👊👊
Thanks Brother 👊!!!! This place has such Huge potential 👀🚀🚀. This shock setup has made a big difference in handling with perfect pack and no real after bounce. 🍻👍👍😎💪👊👊
Far out... I think you guys invented new trick with these rigs. Was that a backflip with a inverted yaw spin? LOL I mean, how's anyone gonna top that?!? 😂 Awesome bash sesh once again, Rich. Love that spot for "full send" sessions, lots of air time to be had there. 👍💪💪🤜🤛😃
Thanks so much Vas😊!!!! Aaron pulled off some insane WTF acrobatics 👀🤣🤣😱. He somehow landed a blind triple FF off the Mega mound 🙀. This spot is Mad FUN but pretty sketchy until we tune up the takeoffs. Should get it shaped up with some work soon 👌. The potential is off the hook. Really appreciate it Brother 👊!!!! 🤘🤘😎💪👊👊
Strange no notification..but what a KILLER SESSION brother ❤❤❤❤❤, talk bout sendIT 👀❤❤❤❤, both OC and KN looked amazing, and the new cap/pistons looks to do good on the truck. ❤
Thanks so much Brother 😊!!!! Looks like my reply never went through 👀. Such a Killer fun time dear friend 😍. Shock setup is doing great 👌. Can't wait to get back out there. 🍻🤘🤘😎💪👊👊
Thanks so much Frank 😊!!!! The setup is really the big thing I find👍. Ample garage time and prep is 80-90% of a good bash session for me. Working on and tuning them is atleast 1/2 the fun 😍
The outcast or notorious.... those are the real tough bastards. I can run all day at the skate park with no or very little. The kraton is a bit long in the chassis and if you dont put a brace from shock tower to shock tower you will taco the chassis eventually. Kraton is still a damn sight better than any traxxis
@@mds1986ms yes but comparing to traxxas is silly because they are very expensive and weak. If you compare to a Hong nor truggy or hyper St pro the arrma has no chance unless it's very upgraded
Two things I simply cannot believe; (1) that you guys always seem to land wheels first after flying 30 feet up on the air, and (2) that these trucks don't break from that height even when landing perfectly! Good on you, good on Arrma.
I would have called this video, "Living on the Edge" 😎👊👍 You had a few near misses while you standing on top of that mountain of stone! I wouldn't want to get hit up there 😂 Just another awesome display of driving between all you guys. You always look like you are having a ton of fun and that's what this hobby is all about 👊 Bash on, Rich 😎
Thanks so much Ed 😊!!!! Well said Brother 👍. Really is all about fun and good times in the end. Definitely had some sketchy and hilarious moments out there 👀🤣🤣. This spot gets me so fired up. Should slowly morph this place into a Killer playground 🍻👍👍😎💪👊👊
WTWhat that Air sends. Wholly molly I am still having a hard time believing my chassis will put Up with this much torture. I am sooooooooo GLAD I am following you Bro. This M2C chassis and voltage hobbies braces plus servo mount will sure help the Outcast get strong 💪. I’m still saving towards my Outcast 😄🙂🥳🤑 Can’t wait. Ohhhhhh I can’t wait. It’s going to be a absolute heart pounder 👊😀 Thank you for these vids bro. Always epic to the maxxx. The sending is just Nut Bar🤪.
Thanks so much Michael 😜!!!! It's Amazing what these rigs can handle dressed with some key upgrades 💪. The M2C chassis is totally next level 👀. I keep saying it cuz it's 100% true. It does flex a bit but it won't bend 👌. That's the best you can ask for for both handling and going extreme. Truly is a game changer. 😱🚀🚀😎💪👊👊
Thanks so much Brother 👊!!!! This place is pretty NUTS👀. Some of these takes off are like rolling the dice 🤣🤣. Hopefully get it shaped up soon. 🍻👍👍😎💪👊👊
Thanks Brother 👊!!!! Congrats on the M2C 👀💪💪💪. It's seriously changed my view of what these rigs can reasonably handle. Completely raises the bar for overall durability 😱🍻😎💪👊👊
@@richduperbash2966 gonna do a complete build ... all hinge pins steering link etc .. just put an indestructible shell on it too , doing a lot of concrete atm and it defo pays off!
Dude those shots of them nearly missing u, was insanely sick. I think u should do more, but don't hit urself with those fast ass big trucks. By the way ive never seen a guy send it that far and land perfect. It must be muscle memory because all the times uve done them. But great video Rich. 🙏🤘🤘🤘
Awesome freakin bash my friend that's such an amazing spot to bash & test the shit out of the M2C shock upgrade very nice happy bashing my brotha👍👍🤙😎🤪😜😝🙈🙉🙊👊✌
Great action as always, guess you're not where all that earthquake activity was over the last couple of days, just saw it last night, and a couple relatives out there also posted on it.
Thanks so much Brother 👊!!!! I'm near Sacramento and couldn't feel anything, but it was felt not too far away 👀. Earthquakes are scary as hell. Lived near the epicenter of the devastating Loma Prieta quake in 89' and I'll never forget the force and devastation 😨. Not having power was the least of our worries. Hope your relatives are ok Bro. 🍻😎💪👊👊
Sick spot Rich 🤤 It’s gunna be crazy with a little work bro. You should get a Bobcat up there for a day. Mad full sends with the Kraton Tank 😵 Came close to taking you out homie😳😆😆🤙🏼
Thanks so much Cam 😊!!!! We're hoping to use the loader parked right there 👀. I haven't driven anything but forklifts and stackers but can figure it out 😋😁😁. This place has MAD potential 😱. Well take those sketchy faces and smooth them out 👌👌😎💪👊👊
hey @rich with the kraton on these tall rock mounds - how high would you say the truck was up in the air before landing on the flat ground below? looks to be close to 50ft or 75ft free falls from the launches... (like 9m 45s in)
Sweet vid rich!! I have to get that M2C chassy!! I have a quick question for you that I haven’t been able to find the answer to. Maybe you know. I just swapped out the spectrum for the tactic the other day and I’m not sure if somethings wrong or if this is the norm. I changed my receiver over to a TR326 as well. So...the throttle trim, the middle dial on the tactic remote has me puzzled. It has to be set In a certain sweet spot (about the 5 o’clock position) or I have issues. any movement of the dial Clockwise it automatically turns the car on and it starts spinning in reverse without pulling the trigger. Any movement counterclockwise and the car starts spinning going forward. Is that normal? It doesn’t seem to be normal because I would hate for my transmitter to be jostled around it in my bag or something and without my knowing it that Dial gets spun and next thing you know I turn on my car and it takes off without me. It doesn’t seem right that the throttle trim is doing that. So is something wrong? And if so ... what?Have you experienced this? I reset the ESC to stock settings, and the issue is still there. I’m pretty sure I installed everything correct, I plugged my servo into channel 1 and my throttling to channel 2. So I don’t know what else to try. Any advice would be great since you have the experience. Thanks!
Thanks Brother 👊!!!! Most definitely get an M2C Goliath Series chassis 💪. Such an incredible upgrade 😱. That does sound normal to me actually. The throttle trim dial does have a set neutral point and the car will spin if it's adjusted. 🍻😎💪👊👊
EastBlood - I just got myself a flysky it4s transmitter and I gotta day the difference is night and day with throttle and steering sensitivity . It feels like your driving different cars. Also the receivers are so cheap have a good amount of channels and have awesome range. I paid 120 for a touch screen transmitter with a stylus and 10 different sensors, for heat voltage speed etc. also when I go bashing I don’t need to bring 4 remotes with me I can save up to 20 models on the transmitter
Thank you Richard you are the reason I bought a kraton v4 could you do a vid with a complete break down of parts you have changed from stock and where you got them good work and thank you.🤘
Congrats on the V4 Kraton David 😱!!!! Here's a vid that details the exact upgrades I run on all my 6s rigs👍. Only difference from 8 months ago is the M2C Racing Goliath Series chassis 👀. No tower brace needed with this massive upgrade 💪. Part # is M2C3000. I helped design and test it. Use the "m2ccoupon" code for 20% off. I have no financial interest with M2C, just a test team guy 👍. Here's my upgrade vid. 😎💪👊👊ua-cam.com/video/LenULRLn70k/v-deo.html
Sick bash with friends bro! I said it before and say it again, that spot is brutal but bitchin! Though I was watching an episode of dodge ball for a second there! Lol
LMAO 🤣🤣!!!! Thanks so much Steve 👊. This place has such SICK potential 👀. That Big mound will be a 100% more predictable after we shape it👌. Right now it's a crap shoot with one sorta smooth line. Should be next level before the summer is done 😱🤘🤘😎💪👊👊
So many blind landings from you guys. Your friend was standing well behind his Kraton and couldn't possibly control it after launch... but his car just kept going. His double front flip was cool, too. Be careful grooming that hill. It's like concrete now but might come down in parts like a landslide.
Thanks so much my friend 😊!!!! Yes indeed, lots of blind landings at this spot 👀. It's inevitable unless standing up on that mound. We just try and time things and level off wheels down 👍. Appreciate the safety tip👌. We were thinking the same thing 😱. That's hundreds of pounds of rock and gravel. We'll definitely be super careful and work tactfully with safety in mind 👍👍😎💪👊👊
Fantastic Awesome Location Rich 😱 them Jumps and Flips with the Slow Mo action was Amazing, 5:10 , 5:20 , 5:27 was you trying to kill yourselfs 🤪😝 you make me laugh when you Laugh , so infectious 😂😂 Yet another amazing video as Always bro 👍😍👍
Thanks so much Tony 😜!!!! This spot is way sketchier than it appears on camera👀. Have to pay close attention and be ready to duck 🤣🤣😱. Should get better with some shovel work 👌. Makes for some Crazy close calls right now and keeps you on your toes. 👀👍👍😎💪👊👊
Just amazes me how far the RC industry has come along.. From tiny little dirt ramps in the back yard to full scale gravel pits with 20'+ air
No doubt Brother 😱. I was hitting tiny dirt jumps with my brushed Tamiya in the mid 80's as a kid. Those were massive for us at the time 🚀🚀👀. Crazy how much improved today's rigs truly are. 😎💪👊👊
@@richduperbash2966 It’s amazing to think back then when the Tyco / Nikko buggy jumped like 2’ everyone was like Oh that was awesome then you run into the house to plug in the wall chargers! Wait like 10hrs! Lol and do it all over again… It’s strange to some to think that bit of enjoyment from the old RC’s to what we have today and the same enjoyment it still brings.
Gonna have to make your channel a drinking game with you saying nice every 2 minutes! Every time you say nice everyone take a drink! Lol! Love the awesome bash session!
Arrma products defy gravity like no other. Great compilation Rich .
Very nice Rich. Glad to see you out beating it up. Another great video👍👍👍👊👊😀😀
Thanks so much Kenny 😜!!!! Hope you're having a wonderful Birthday 🎂 Brother 👊!!!! 🍻🤘🤘😎💪👊👊
I gotta tell ya man,you & Eric=R/C dude81 are the 2 best bashers I’ve ever seen.Kudos.Keep the great vids coming.Peace & be well.
Great bash, it was fun enough just watching. Thx for putting the effort in with your vids
Thanks so much Brother 👊!!!! Vids definitely take time to do but I love the tips and conversation passing both ways. 🍻👍👍😎💪👊👊
Absolutely awesome sendings Rich! Wow how your rigs hold up, just amazing. You inspired me again to check out the local BMX track. 👍
Thanks so much Kimberly 😊!!!! This combination of upgrades has really proven itself 👀. It blows me away how tough these ARRMA's are with them 💪. Hope you get back to the track soon 🚀. I'll definitely be watching 😍🤘🤘😎💪👊👊
@@richduperbash2966 So Rich
Are those voltage hobbies Chassis braces or M2C on your Kraton?
You think there the best?
Planning some upgrades for my v3 and I'm thinking M2c towers eventually but Voltage or M2c braces right away. Which braces you prefer? I know there both way better than stock.... But is the one that is more solid?
@@Dmac13131 I'm running both Voltage and M2C between my V3-V4 Kraton's 👍. Both are great overall. The rear M2C tower support braces have an advantage in protecting the rear bulkhead. The M2C towers also have more material. I can't fault either design. It comes down to preference I think. 🍻😎💪👊👊
@@richduperbash2966 appreciate that Rich
In the grand scheme of things, I would assume some parts should stay Plastic (Arms, wings) as they need to exorb impact and flex(enter RPM), while other (chassis and towers) need to be rigid (metal braces etc). If everything is metal that's no good.
Yeah I see there is some drilling needed for the M2c chassis support braces, assuming that adds some stability or mounting points?
@@Dmac13131 definitely need a good mix of plastics and metals 👍. Drilling the towers is easy. You use the brace holes as your guide and Mitch sends you a bit. It adds considerable support and directs energy to the chassis if you take a tower hit with a tail landing or brutal roll. 👀
That was so intense man! That was a step above everything, double and triples both ways, insane landings, near misses, just insane. Great control of those tanks! Rough spot with smooth airs sir! Can’t believe you had no breakage with those multi-story landings... Thanks for putting this out, made my day Rich!
You are absolutely in my element here. This is where the wife and me bash. Takes about 20 mins to get there. Gravel and Sand pit. Right on the river. It's always amazing and awesome. I love the gravel. Don't have the BMX like you but we have this here in Iowa. Popular spot too. They redid our skate park as well. I took our Grandsons there to drive the Granite and they just destroyed it, LOL! Highest jumps I've seen yet with that little beast. Just have to get down to Des Monies to pick up a couple of things I missed when I started the repair. At least they have the parts unlike my plane that's waiting on the Wing from you guessed it, China. Don't know when it's coming. Got my Talion so I'm good running 6s in it. Great to see you in a gravel pit. They are truly fun except when a big one gets stuck in the main Gear. Fun Video Rich!
Wow....that is some serious air.
I'm excited to see you guys groom that monster pile as a giant jump. Seriously a dream bashing spot.
Thanks Brother 👊!!!! I'm super excited too 👀. It's quite sketchy as is. The air potential is fairly insane 😱. We're hoping to build up some FMX style ramps too 😁. We might need to space out some dirt landing pads or situate some transfer jumps. This place has HUGE potential for sure. 🍻👍👍😎💪👊👊
What a blast. Such a joy to watch this. Amazing skills and good job putting these together to be able to take such a beating.
Thanks so very much Brother 😊!!!! This spot gets me so pumped 😝🤘🤘. Such a Blast to bash 😍. The upgrades definitely bring these ARRMA's to the next level. 🍻👍👍😎💪👊👊
You're the best basher there is!! Look fwd to the video!
Thanks Brother 👊!!!! Happy bashing 🍻🤘🤘😎💪👊👊
This spot is so sick 😲 as always your Arrma’s are getting it done 💪🏻 some pretty close calls there on the mound summit too 😂
Awesome Rich!! You guys had some crazy take offs on that lip 😱😱😵😵🤪 Looks like your reflexes were put to the test lol! Love how you send these things bigger and bigger! M2C shock caps seem to be close 😍
Thanks so much Aaron 😜!!!! Really wished I'd brought my metal rakes and shovels. Didn't think about it cuz this was a last minute bash with lengthy commute time. Definitely tested the reflexes and made for some Crazy takes offs 👀🤣🤣. M2C shock setup is working out Killer. 👍👍😎💪👊👊
KILLER bash brother Rich!!😜😳🤘That place is sweet for full sends and getting crazy!!😍Man I need to move to Cali so I can have some epic bash spots dang!🤣The Outcast did killer and then the beefcake sending tank stole the show!! Simply amazing what these upgraded Arrma's will endure! Waiting on my M2C to show up for my old Noto/Outcast rebuild! Absolute great show and vid bro!!!😎👊🤘🤘🍻
Thanks so much Eric😜!!!! Brother we'd be bashing the snot out of these spots together 👀. The beefcake Kraton is absolutely perfect for this Crazy pit 😍. Hopefully start reshaping mounds again and placing Mega ramps soon. The Outcast did great overall 👍. M2C caps and pistons should be releasing anytime. Hope your chassis shows soon Brother. I'm still amazed the beating these upgraded ARRMAS can handle 🤣🤣🤘🤘😎💪💪💪👊👊
Loved everything about this bash brotha! 👑Basher!
Thanks so much Stevo 😜!!!! It's such ridiculous FUN out there 😍. So nice not having to worry about hitting anyone but each other or ourselves 👀🤣🤣😱😎💪👊👊
@@richduperbash2966 Hahaha ya u guys had some close ones
OMG!!!!! That looks like so much fun
Awesome vid Rich! Who the heck thumbs down a video like this though?!
Thanks so much Brother 😊!!!! Probably anti-ARRMA folk....Lol. 🍻🚀🚀😎💪👊👊
Love construction site bash brother. Having different types of terrains makes for some awesome interesting bash for sure. You guys had some very close call there LOL 😲😬😱😂😂. Getting some Big airs off of that gravel Mount. Awesome bash guys 👍😎.
Thanks so much Chris 😜!!!! Definitely had some wild moments out there 😱. This spot has wicked potential with a bit of shaping 👌. We have some ideas bouncing around to make it a next level basher's paradise 😍👍👍😎💪👊👊
That was an amazing session of launches... Incredibly fun to watch. Great vid...
Hi my friend Rich. 😎
A lot of fun in this video. 😊 😎 👍 Excellent jumps as always. Yvan 😊
Amazing bash! Hard not to smile so big watching Arrma Tough just crush it! Nice job 💪💪💪👍👍👍🍻🍻🍻
Thanks so much Brother 😊!!!! Arrma Tough all the way 🍻🤘🤘😎💪👊👊
Now thats a pile of rocks lol. Great driving and landings. Those were some really big air jumps 🤘
Oh how'd I know id see u here now that ur an outcast owner lol hey just like I told u 50k front, 200k center, 20k rear
@@STEVOD313 lmao I've been a Duperbash fan even before my Outcast hehe. Problem is now I have to go back and rewatch a lot of his Outcast videos lol
That first send looked like a plane taking off. Those shock caps look dope!
Thanks Brother 👊!!!! This place has such Huge potential 👀🚀🚀. This shock setup has made a big difference in handling with perfect pack and no real after bounce. 🍻👍👍😎💪👊👊
Far out... I think you guys invented new trick with these rigs. Was that a backflip with a inverted yaw spin? LOL I mean, how's anyone gonna top that?!? 😂
Awesome bash sesh once again, Rich. Love that spot for "full send" sessions, lots of air time to be had there. 👍💪💪🤜🤛😃
Thanks so much Vas😊!!!! Aaron pulled off some insane WTF acrobatics 👀🤣🤣😱. He somehow landed a blind triple FF off the Mega mound 🙀. This spot is Mad FUN but pretty sketchy until we tune up the takeoffs. Should get it shaped up with some work soon 👌. The potential is off the hook. Really appreciate it Brother 👊!!!! 🤘🤘😎💪👊👊
Strange no notification..but what a KILLER SESSION brother ❤❤❤❤❤, talk bout sendIT 👀❤❤❤❤, both OC and KN looked amazing, and the new cap/pistons looks to do good on the truck. ❤
Thanks so much Brother 😊!!!! Looks like my reply never went through 👀. Such a Killer fun time dear friend 😍. Shock setup is doing great 👌. Can't wait to get back out there. 🍻🤘🤘😎💪👊👊
The best jumps again and again 👍. Great information too. A pleasure to watch your videos 🤟
Quite possibly the best yet wow awesome
I really like your videos. Always action packed. You really get the best air! Plus your setups on them are great.
Thanks so much Frank 😊!!!! The setup is really the big thing I find👍. Ample garage time and prep is 80-90% of a good bash session for me. Working on and tuning them is atleast 1/2 the fun 😍
Got to love those style of bash places. I was just at one my self. You always find a way to get giant air.
Oh man Rich thats a great spot too! The ramp is awesome and you launched that brick right to the sky :)
Thanks so much Brother 😜!!!! Definitely has the terrain I've been craving for years 👀😍😍😍. Hope to see you back at your Epic spot again soon. 🍻🤘🤘😎💪👊👊
Good to know Arrma is durable. I was really on the fence.
Vegas RC you will not regret buying a Arrma!
@@tonyromano6220 right on. Gonna buy 4 or 5 and put them on my you tube channel. Run em all over Vegas here
Tbh there isn't much arrma left XD
The outcast or notorious.... those are the real tough bastards. I can run all day at the skate park with no or very little. The kraton is a bit long in the chassis and if you dont put a brace from shock tower to shock tower you will taco the chassis eventually. Kraton is still a damn sight better than any traxxis
@@mds1986ms yes but comparing to traxxas is silly because they are very expensive and weak. If you compare to a Hong nor truggy or hyper St pro the arrma has no chance unless it's very upgraded
Wow, that is some major air time, Rich. Great job. I'm sooo, envius right now.
Awesome bash spot! Surgical percussion with those flips. I know it can vary a lot when jumping random rock piles. As rough as it gets 👍👊
Two things I simply cannot believe; (1) that you guys always seem to land wheels first after flying 30 feet up on the air, and (2) that these trucks don't break from that height even when landing perfectly! Good on you, good on Arrma.
The Tech Buyer's Guru he has upgraded chassis on one of them.
Also throttle can bring front down and break rear, in flight.
Arrma is tough as hell as well.
Wow man was so awesome to see you besh in this place🤩
Great bash and perfect test for parts durability.. 👍👍
Thanks so much Brother 👊!!!! This spot puts stuff to the test no doubt 👀👍👍😎💪👊👊
Thanks so much Brother 👊!!!! This spot puts stuff to the test no doubt 👀👍👍😎💪👊👊
Love the big mad jumps you do , really wish we had spots like that in the Uk as I would def have it on my channel. Keep up the good work 👍🏻
Thanks so much Brad 🤗. Good spots aren't easy to find. I'm super fortunate and grateful whenever I get to visit this gravel pit. 🙏👍👍😎💪👊👊
Your laugh, makes these videos!
I would have called this video, "Living on the Edge" 😎👊👍 You had a few near misses while you standing on top of that mountain of stone! I wouldn't want to get hit up there 😂
Just another awesome display of driving between all you guys. You always look like you are having a ton of fun and that's what this hobby is all about 👊 Bash on, Rich 😎
Thanks so much Ed 😊!!!! Well said Brother 👍. Really is all about fun and good times in the end. Definitely had some sketchy and hilarious moments out there 👀🤣🤣. This spot gets me so fired up. Should slowly morph this place into a Killer playground 🍻👍👍😎💪👊👊
BOY!!!! you landed a 360 flair (as it would be called in the BMX freestyle sport).....unbelievable
Insanity. Gotta love those gravel pits man! Sweet bashing spot
Cool, new spot to learn to fly for your typhoon
Awesome going Rich.. what a place to be at.. little work on jump building you got it made..
Awesome video again mate 👍👍👍👍
What else can be said! Always a good show
Sick air as usual keep up the great vids 🤘👍
Thanks so much Brother 👊!!!! Bash on🍻👍👍😎💪👊👊
Well there goes another one... A perfect day! 👍💪👌 Thank's!
Great bash spot Rich! Awesome vid!!👍👍
Awesome bashes as usual! A+
Thanks so much Brother 😜!!!! Love the Kraton 6s 👀👍👍😎💪👊👊
WTWhat that Air sends. Wholly molly I am still having a hard time believing my chassis will put Up with this much torture.
I am sooooooooo GLAD I am following you Bro.
This M2C chassis and voltage hobbies braces plus servo mount will sure help the Outcast get strong 💪.
I’m still saving towards my Outcast 😄🙂🥳🤑
Can’t wait. Ohhhhhh I can’t wait. It’s going to be a absolute heart pounder 👊😀
Thank you for these vids bro. Always epic to the maxxx. The sending is just Nut Bar🤪.
Thanks so much Michael 😜!!!! It's Amazing what these rigs can handle dressed with some key upgrades 💪. The M2C chassis is totally next level 👀. I keep saying it cuz it's 100% true. It does flex a bit but it won't bend 👌. That's the best you can ask for for both handling and going extreme. Truly is a game changer. 😱🚀🚀😎💪👊👊
Great video as always man!
Thank you Brother 🤗
Gotta love the Kraton...it just behaves so well:)
Sick jumps and nice driving my friend! Awesome video.
Thanks so much Brother 👊!!!! This place is pretty NUTS👀. Some of these takes off are like rolling the dice 🤣🤣. Hopefully get it shaped up soon. 🍻👍👍😎💪👊👊
Yeeeeah bro!!!! Amazing video in pure TP style!!!! 😅🤙 Btw yellow body is so beautiful!!! 😍👍
Thanks so much Brother 😜!!!! Ole yellow is hanging in pretty nicely. 🍻👍👍😎💪👊👊
@@richduperbash2966 Can't wait to see also your new yellow Taliphon in action!!! 😜💪🤟🤙
just got my m2c and hoping to get out tomorrow
awesome video as always brother!
stay blessed
Thanks Brother 👊!!!! Congrats on the M2C 👀💪💪💪. It's seriously changed my view of what these rigs can reasonably handle. Completely raises the bar for overall durability 😱🍻😎💪👊👊
@@richduperbash2966 gonna do a complete build ... all hinge pins steering link etc .. just put an indestructible shell on it too , doing a lot of concrete atm and it defo pays off!
You guys are maniac's! I think the Kraton jumped better without the body! That was some rarefied air Bro!!!
One hell of a bash rich keep up the great work
The air you guys were getting was just ridiculous😎😎 and I thought I was starting to get good at the BMX park getting like 15 or 20 ft to air LOL
An man nice spot i finally got my revo conversion going decent on 6s the other day 6s is freaking insane nice session man
Beautiful spot , crazy landings lol
Keep up the good work bro !!!
Thanks so much Stephane 😜!!!! Can't wait to get back there and shape it up 😱. This spot is Fun now, but has such Killer potential. 🍻👍👍😎💪👊👊
Dude those shots of them nearly missing u, was insanely sick. I think u should do more, but don't hit urself with those fast ass big trucks. By the way ive never seen a guy send it that far and land perfect. It must be muscle memory because all the times uve done them. But great video Rich. 🙏🤘🤘🤘
Thanks so very much Luke 🤗. This spot is insanely FUN 😍. Hope to get back out there soon. Appreciate the the kind words Brother. 😎💪👊👊
Oh, that 2040RC sticker needn't be so prominent. They have their channel and great vids and you have yours.
I figured they sent them clear over from Italy that I'd proudly show my support 👌😎💪👊👊
Nice place, you make mega jumps there.
beautiful trick rich 👍👍👍💪💪🤘
Thanks my friend 😊!!!! Can't wait to get back there soon. 👀👍👍😎💪👊👊
Yeah 💪💪🤘🤘😁
Rich you and your boy's put down some serious air magic......respect brother 👊🏻🤪🤘🏻........peace 🍻
Thanks so much Spencer😜!!!! It was Mad FUN for sure 😍. I couldn't stop busting up 🤣🤣👍👍😎💪👊👊
It's like a skatepark. You just pray you don't break anything lol. Great air!!.
Awesome freakin bash my friend that's such an amazing spot to bash & test the shit out of the M2C shock upgrade very nice happy bashing my brotha👍👍🤙😎🤪😜😝🙈🙉🙊👊✌
Thanks so much Chris 👊!!!! This spot is friggin NUTS 😱. Can't wait to tune it up Brother 👌. Definitely puts these rigs to the test. 🍻🤘🤘😎💪👊👊
Great action as always, guess you're not where all that earthquake activity was over the last couple of days, just saw it last night, and a couple relatives out there also posted on it.
Thanks so much Brother 👊!!!! I'm near Sacramento and couldn't feel anything, but it was felt not too far away 👀. Earthquakes are scary as hell. Lived near the epicenter of the devastating Loma Prieta quake in 89' and I'll never forget the force and devastation 😨. Not having power was the least of our worries. Hope your relatives are ok Bro. 🍻😎💪👊👊
Few close calls there bro hahaha looks like everyone had a great time! Bash on bro
Thanks so much Ed 😊!!!! It was a total blast and just what I needed 😍. Aaron and Carl made it good times for sure. 🍻👍👍😎💪👊👊
Right the heck on! That's the name of da game🚙💨
there he iiissss. Nice bash brother.
Thanks Tee👊!!!! Happy bashing Brother 🍻🤘🤘😎💪👊👊
Always wonderful and distinctive in jumping🌹🌹👍👍
God that is a great place to play!
Unreal, just amazing how they hold up.
Awesome bash bro...
Thanks Luis 👊!!!! This session was Mad Fun 😜🤘🤘😎💪👊👊
Thanks for the video. I can't believe you guys were landing these jumps. BTW how can you thumbs down on this!
Awesome vid!!!!!
Sick spot Rich 🤤 It’s gunna be crazy with a little work bro. You should get a Bobcat up there for a day. Mad full sends with the Kraton Tank 😵 Came close to taking you out homie😳😆😆🤙🏼
Thanks so much Cam 😊!!!! We're hoping to use the loader parked right there 👀. I haven't driven anything but forklifts and stackers but can figure it out 😋😁😁. This place has MAD potential 😱. Well take those sketchy faces and smooth them out 👌👌😎💪👊👊
Try that with a REVO.... Glad I got a Kraton, but I baby mine compared the the twisted abuse you put yours through! Thanks for the Vid!
That's crazy!
Awesome rc
Someone is running a Castle combo lol! Them beeps 😉
Your videos blow my mind.
hey @rich with the kraton on these tall rock mounds - how high would you say the truck was up in the air before landing on the flat ground below? looks to be close to 50ft or 75ft free falls from the launches... (like 9m 45s in)
Best laugh ever!!!!!!🙂
Thanks Darek 🤗. I was busting up out there 🤣🤣. So much Fun and good times. 🍻😎💪👊👊
That one big jump had a “prelaunch”
What is better the arrma notorious v4 or Arrma Kraton v4 for bashing
Zero dislikes. My man.
That’s awesome I will have to see where I can get a m2c chassis for my kraton v2 thank you
No problem Michael 👊. Here's a link to the chassis. Use the m2ccoupon code for a discount. m2cracing.net/kraton/431-m2c-arrma-kraton-chassis.html
Sweet vid rich!! I have to get that M2C chassy!!
I have a quick question for you that I haven’t been able to find the answer to. Maybe you know. I just swapped out the spectrum for the tactic the other day and I’m not sure if somethings wrong or if this is the norm. I changed my receiver over to a TR326 as well. So...the throttle trim, the middle dial on the tactic remote has me puzzled. It has to be set In a certain sweet spot (about the 5 o’clock position) or I have issues. any movement of the dial Clockwise it automatically turns the car on and it starts spinning in reverse without pulling the trigger. Any movement counterclockwise and the car starts spinning going forward. Is that normal?
It doesn’t seem to be normal because I would hate for my transmitter to be jostled around it in my bag or something and without my knowing it that Dial gets spun and next thing you know I turn on my car and it takes off without me. It doesn’t seem right that the throttle trim is doing that.
So is something wrong? And if so ... what?Have you experienced this? I reset the ESC to stock settings, and the issue is still there. I’m pretty sure I installed everything correct, I plugged my servo into channel 1 and my throttling to channel 2. So I don’t know what else to try. Any advice would be great since you have the experience. Thanks!
Thanks Brother 👊!!!! Most definitely get an M2C Goliath Series chassis 💪. Such an incredible upgrade 😱. That does sound normal to me actually. The throttle trim dial does have a set neutral point and the car will spin if it's adjusted. 🍻😎💪👊👊
EastBlood - I just got myself a flysky it4s transmitter and I gotta day the difference is night and day with throttle and steering sensitivity . It feels like your driving different cars. Also the receivers are so cheap have a good amount of channels and have awesome range. I paid 120 for a touch screen transmitter with a stylus and 10 different sensors, for heat voltage speed etc. also when I go bashing I don’t need to bring 4 remotes with me I can save up to 20 models on the transmitter
What are you running for lower shock mounts? That seems to be my biggest weak spot. Or is there a secret to setting up so don’t break them?
Nice hardcore bashing Rich.
Thanks so much Brother 😊!!!! 🍻👍👍😎💪👊👊
Thank you Richard you are the reason I bought a kraton v4 could you do a vid with a complete break down of parts you have changed from stock and where you got them good work and thank you.🤘
Congrats on the V4 Kraton David 😱!!!! Here's a vid that details the exact upgrades I run on all my 6s rigs👍. Only difference from 8 months ago is the M2C Racing Goliath Series chassis 👀. No tower brace needed with this massive upgrade 💪. Part # is M2C3000. I helped design and test it. Use the "m2ccoupon" code for 20% off. I have no financial interest with M2C, just a test team guy 👍. Here's my upgrade vid. 😎💪👊👊ua-cam.com/video/LenULRLn70k/v-deo.html
Oh dang... Lawlz
It begs the question if it's really the same RC car if you change every single component it came with
Bro that was epic 🤘
Sick bash with friends bro!
I said it before and say it again, that spot is brutal but bitchin! Though I was watching an episode of dodge ball for a second there! Lol
LMAO 🤣🤣!!!! Thanks so much Steve 👊. This place has such SICK potential 👀. That Big mound will be a 100% more predictable after we shape it👌. Right now it's a crap shoot with one sorta smooth line. Should be next level before the summer is done 😱🤘🤘😎💪👊👊
@@richduperbash2966 Sweet, Looking forward to more demolition derby action! Lol
So many blind landings from you guys. Your friend was standing well behind his Kraton and couldn't possibly control it after launch... but his car just kept going. His double front flip was cool, too.
Be careful grooming that hill. It's like concrete now but might come down in parts like a landslide.
Thanks so much my friend 😊!!!! Yes indeed, lots of blind landings at this spot 👀. It's inevitable unless standing up on that mound. We just try and time things and level off wheels down 👍. Appreciate the safety tip👌. We were thinking the same thing 😱. That's hundreds of pounds of rock and gravel. We'll definitely be super careful and work tactfully with safety in mind 👍👍😎💪👊👊
And classic airials in the back (going onto rhe ramp, jumping 180° and comming front forward down again). How is he doing that? :)
Next time you head out there make sure someone leaves the keys to the loader, with that much material around you can make whatever jump you like.
No doubt Brother 😜!!!! We're actually working out those details 👀. The potential here is INSANE especially with some heavy equipment 😱👍👍😎💪👊👊
Fantastic Awesome Location Rich 😱 them Jumps and Flips with the Slow Mo action was Amazing, 5:10 , 5:20 , 5:27 was you trying to kill yourselfs 🤪😝 you make me laugh when you Laugh , so infectious 😂😂 Yet another amazing video as Always bro 👍😍👍
Thanks so much Tony 😜!!!! This spot is way sketchier than it appears on camera👀. Have to pay close attention and be ready to duck 🤣🤣😱. Should get better with some shovel work 👌. Makes for some Crazy close calls right now and keeps you on your toes. 👀👍👍😎💪👊👊