I'm glad I found your channel. I've been looking for a decorative, functional and cool way to protect the chainstay on my mountain bike. Assuming this won't inhibit tire clearance, I think we've got a winner!
Thanks!!! This made my Benchmade fixed Adamas look even more badass than before! I used some digi camo cord (mostly od green with bits of tan and black throughout) on my Adamas, which is Desert Sand in color, and it looks sick and feels awesome!
@@gochi6542 NICE! You'll love it! I initially planned to just wrap it until I could make some actual G10 handle scales, but I liked how it turned out so much that I'm leaving it! And when it does need replacing, I'll just wrap it the same way. The knife, itself, has a lot to do with it. Because I've wrapped plenty of knives in the past and just hated the look and feel. This wrap on the adamas blade is just a perfect match IMHO. I hope you like it as much as me!
👍Used this outstanding weave on the Rock Island Armory VR80 Semi-Auto Shotgun forend hand rail. Wrapped the forend hand rail with the "flat-top" part of this weave on the bottom of the forend hand rail. Common sense, since with the knife weave the "flat-top" sits in the palm of the hand. On the forend of a long gun, your support hand palm is positioned on the bottom of the forend hand rail. Worked out great for me. Great heat shield with rapid firing of 12ga shotgun ammo. 🇺🇲Stay well. Go in peace.
I’m going to have to watch this video several time to keep track of when to bring the cord up through the bottom versus down through the top. But I really like this as a handle cover.
@@secondhandlyon2603 Thanks.. I guess the chance of "waisting" 2-3' of cordage isn't the most pressing of my concerns...lol.. I think I must have smoked my lunch that day, ...I do appreciate you shooting me an answer to a kind of foolish question.. ~peace
EXTRA HELP HERE over handle, over, under, pull over handle, under, over, pull Switch 4.5 feet of rope. 4.5 inch handle. When first starting, stagger the rope to be longer on the back side (the side with the knots, opposite sharp end). About 8-9 inches. This way the rope will be even by the time you get to the end.
put two loops of a smaller diameter of the paracord under the winding, then thread the ends into them, tighten and pull out these individual loops..Hello,....
I never thought a square knot would look so nice as a wrap. But then again, you make every paracord project look good. Thanks for making this video. What would you recommend as a wrap for a spinning fishing rod (the butt end of the rod handle)?
Hmm. Don't know if the pace or the metronome tick-tock made my eyelids heavy. (YAWN!) Sorry. All in all, decent wrapping but I'm concerned the wraps aren't secured well enough that they won't come unraveled. But maybe it's just me? Inquiring minds wanna know. Overnout
I guess I did it backwards but here’s the only way my brain can understand it: Blade right: Left under right Right under left Blade left: Right under left Left under right Hope this saves someone hours bc this took me forever to figure out 🫡
I'm glad I found your channel. I've been looking for a decorative, functional and cool way to protect the chainstay on my mountain bike. Assuming this won't inhibit tire clearance, I think we've got a winner!
Used this on a vintage Case knife that had a damaged handle, turned out perfect. Thank you!
Haha this is what I’m looking to do to a old case hunting knife also
Took me about 45 minutes to get the pattern down. Thank you for the video
Thank You!
Thanks!!! This made my Benchmade fixed Adamas look even more badass than before! I used some digi camo cord (mostly od green with bits of tan and black throughout) on my Adamas, which is Desert Sand in color, and it looks sick and feels awesome!
Oh good to know. Starting this process on the same knife I just bought and excited to get it finished
@@gochi6542 NICE! You'll love it! I initially planned to just wrap it until I could make some actual G10 handle scales, but I liked how it turned out so much that I'm leaving it! And when it does need replacing, I'll just wrap it the same way. The knife, itself, has a lot to do with it. Because I've wrapped plenty of knives in the past and just hated the look and feel. This wrap on the adamas blade is just a perfect match IMHO. I hope you like it as much as me!
Here for THIS!
i stand in solidarity with the epic beat, thank you for the knowledge, well done!!!
Oh its a bunch of square knots on each side , nice.
Красота лучше всех ЛАЙК! СПАСИБО.
Great video. I’ve wrapped to knifes with 550 cord using your video. Thanks for sharing
Thank you!
👍Used this outstanding weave on the Rock Island Armory VR80 Semi-Auto Shotgun forend hand rail. Wrapped the forend hand rail with the "flat-top" part of this weave on the bottom of the forend hand rail. Common sense, since with the knife weave the "flat-top" sits in the palm of the hand. On the forend of a long gun, your support hand palm is positioned on the bottom of the forend hand rail. Worked out great for me. Great heat shield with rapid firing of 12ga shotgun ammo.
🇺🇲Stay well. Go in peace.
Such a great feedback. Thank You!
@@CreationsByS Thought that this application of your demonstration would be very unique to you and your subs. Thanks for ❤️ed comment
Man that is sick. I cant wait to do this on my Esee4
Dude added music that makes you feel like you’re diffusing a bomb!
Hi from Ukraine 🇺🇦💪💯🚀💥 your video is great and knots are very nice! Thanks 👍👍
This is just like West Country whipping, except you use a square knot rather than an over hand knot. Looks good ! Thanks!
essentially reef knots. nice idea!
I’m going to have to watch this video several time to keep track of when to bring the cord up through the bottom versus down through the top. But I really like this as a handle cover.
Thank You!
If you like our work, support us through ETSY
www.etsy.com/shop/thecbys
Back knife, Cord go down and come back up , turn the knife, the same , the Cord from back go down and come back up, sorry for the english .
@@CreationsByS how long should the paracord be
How do you determine how long of a piece of 550 to start with?
About 12 to 16 feet or 4 to 5 meters is my guess. It depends on the wrap style. I've done a few and that's my guess
@@secondhandlyon2603
Thanks.. I guess the chance of "waisting" 2-3' of cordage isn't the most pressing of my concerns...lol..
I think I must have smoked my lunch that day, ...I do appreciate you shooting me an answer to a kind of foolish question..
~peace
60 inches
@@stevet4564I can appreciate smoking your lunch 😂
Really like that wrap
Ficou muito top amigo 👏🏾
Thanks! Just wrapped my training knives 😎 peace!
That's a good looking wrap.
Appreciate!
I alternated the pattern it make the wrap more tight and a bigger grip
EXTRA HELP HERE
over handle, over, under, pull
over handle, under, over, pull
Switch
4.5 feet of rope.
4.5 inch handle.
When first starting, stagger the rope to be longer on the back side (the side with the knots, opposite sharp end). About 8-9 inches.
This way the rope will be even by the time you get to the end.
Great!
Nice work very helpful! How do you do the knot at the end?😊
What length of paracord do you use???
Rule of 👍 is a foot and inch
put two loops of a smaller diameter of the paracord under the winding, then thread the ends into them, tighten and pull out these individual loops..Hello,....
Very cool 👍
Thank You!
If you like our work, support us through ETSY
etsy.me/2RrBTu1
Right "left" left "Right"
This was it's own kind of hell to have to take instructions from.
I like that knife. What is it?
Used this wrap style on a hunting knife I had, worked phenomenal with 550 paracord, Cheers !
7-6 5 pm. Please if you can tell me where to look to wrap a small flashlight. I’m a little frustrated, but will stay the course.
cool, but how much paracord do I need?
Just made a knife from saw blade....now I will put a SUPER handle on it! Thanks. And thanks for going slow at first ! ! !
Thank You!
www.etsy.com/shop/thecbys
If you like our work, support us through ETSY
That's a nice looking knife what is it ?
En mi rancho diríamos:
Un nudo de hombre de cada lado, hasta terminar.
Fácil!
Starting length of paracord?
Ya think it’ll work on a smooth oval handle?
What kind of knife is that?
I came, I saw, I learned, and I tied on my axe... Thank you.. 👍😀
How many feet of paracord do you need for this?
How do you do the knot at the end
Awesome!.. what kind of knife and sheath is that??
It looks like a wildsteer wt4 or wt4 xl, they came with that sheath also but not sure about it..😉
Can this be done on a bat handle?
Super Tutorial, auch für Neulinge. Also perfekt für mich ☺️
Where did you get the knife
How about centering more the knots? it would add uniform thickness to the very middle of the handle, and it wont look too squared on one side.
Ummmm question.... how big are the two pilot holes on top and bottom???
How many feet of paracord did you use for that knife handle size?
1' = 1"
@@chookum5093 1’=1” for what width of handle? Without this info, how do you come up with the number?
Can you do this on an actual knife handle? I have an old Vietnam era Kabar from my dad when he served. Would like to try to wrap the handle
So in order to simplify things: all this is is a series of square knots
Squareknot, flip, repeat.
I never thought a square knot would look so nice as a wrap. But then again, you make every paracord project look good. Thanks for making this video. What would you recommend as a wrap for a spinning fishing rod (the butt end of the rod handle)?
Does anybody know where to get handle-less knives from...please!?
Amazon, maybe.
benchmade
Why the quotation marks on "knife"? And what knife is that?
How you make the last round knot? Not shown in this video
Qual é essa faca? Nome ou referência da faca.
Круто.
Thank You! #cbys
What knife is this?
Knife brand/model?
What would you recommend for a machete
a different person's tutorial
Send it to me.....lol!!!
So make a square knot on alternating sides
SHOW DE BOLA 👍👍👍👍🇧🇷
Thank You!
If you like our work, support us through ETSY
etsy.me/2RrBTu1
احسنت صنعن 👍👍👍👍👍👏👏👏
صنعا*
تنوين بالفتح
Thank You!
If you like our work, support us through ETSY
etsy.me/2RrBTu1
Thank You!
If you like our work, support us through ETSY
etsy.me/2RrBTu1
Hmm.
Don't know if the pace or the metronome tick-tock made my eyelids heavy.
(YAWN!) Sorry.
All in all, decent wrapping but I'm concerned the wraps aren't secured well enough that they won't come unraveled.
But maybe it's just me?
Inquiring minds wanna know.
Overnout
Thank you!
they should be enough secured if you are tightening them properly.
Isn't the paracord Handle mainly for survival Needs For rope? Not just looks.
Just tie square knots. Sure knots are secure (don't tie granny knots. Granny knots are knot secure)
I literally almost died
Круто!!!Сколько использовали паракорда?
What kind of are you wearing on your right hand? Looks nice.
yes
Indian 🎵 musick...........
Great vid! Is the knife something you bought online? If so can you add a link, Thanks!
Link is inside description.
Best.
can you do the ps4 controller
you mean wrapping it?
@@CreationsByS yes
It is possible. Thank you for your suggestion.
Awesome, do it ... do it.
what knife is that?
please take a look at our description for the all materials used or via this direct link @www.paracord.eu/Wildtech-4-Black-Knife-Black
So basically square knot flip ,square not flip
doy link
G.J.M.
Oi...👁️
Luar biasa
Thank you!
As uno para un karan bin
woow maaaan looks fcking awesome ^^ !
What is the name of this knife
It is called a boot knife . Could also be called a neck knife
Do you have a brand and model name?
А что за модель ножа??
Wow!
Thank You!
If you like our work, support us through ETSY
etsy.me/2RrBTu1
👍👍👍
Awe-some!
Thank You!
If you like our work, support us through ETSY
etsy.me/2RrBTu1
That's simply confusing, too much explanation, sausage like fingers blocking the view. Yup, I'm frustrated.
1
Thank You!
If you like our work, support us through ETSY
etsy.me/2RrBTu1
Paracord is not easy on the hands, be careful when tightening.
That wrap doesn't work, it's complicated and it's not functional, try to untangle that and put it back together, it's going to take a long time.
Bad
cat got ur tongue?
Need some sound in UA-cam explaining what the hell you're doing do you much much better video
This is awful.
So basically you just tie a "Samariter" knot on each side and the repeat... sweet
I heard very good opinions about the Woodglut plans.
I guess I did it backwards but here’s the only way my brain can understand it:
Blade right:
Left under right
Right under left
Blade left:
Right under left
Left under right
Hope this saves someone hours bc this took me forever to figure out 🫡
Idiot unfinished and rukozop
What knife is this?
How much -length- of paracord do you use?
What knife is that
What knife is that