Hello, Nissan X-Trail tuning artist! This kind of tuning is very exciting! I have the same Nissan, and also a diesel. I really like this car. Despite its age, it is good! If you have any drawings or sketches with the dimensions of the parts to increase the clearance, I would be very grateful if you share them. Perhaps there were some difficulties in the design during the work, please share. I do not see the right front side member on your car, or has it been changed? The air intake pipe structure is not yet visible. A very interesting device for placing a spare wheel. You are a great master! I wish you interesting thoughts and solutions.
Thank you so much for this video, I have already managed to bring up my car and I already put this tyre BF Goodrich 245/70/16 and the car is running very well with the tyre, but I was asking myself why the front on suspension member is not up, now I have learnt again from you about lift up springs, and am gonna find that brand and put on my Xtrail T31 too, Currently my Xtrail T31 looks exactly up like your Xtrail, before putting these springs, now i hope with the springs it would go up again and be like yours, Friend your videos are very helpful to me, very helpful, may God bless you for sharing these ideas, am so happy with these ideas.
Omedetôo! I have a T30 2.5. I saw first time in 2003 a X-Trail when i have been in Japan for work.I Love Japan and 13 years ago i'm come back to Brazil. Great upgrade and the R32 wheels match perfectly with your T31!
The tires used at this time were BFGoodrich All-Terrain ko2 245/70R16. They have now been changed to Trail Terrain of the same size. The wheels are genuine R32 Skyline, 8J16 +30. The springs are 968 mode rings made in Japan, and any manufacturer is fine as long as they can lift the car by about 30mm.
Did you adjust the hole on the shock absorber for the Camber bolt, seems they are wide. Kindly share where we can buy the camber bolt that fits this vehicle.
The camber bolt that fits is 14mm. www.amazon.com/TRQ-Suspension-Camber-Adjustment-Passenger/dp/B09HWWPZMD/ref=sr_1_2?crid=9FQP87BRKY70&dib=eyJ2IjoiMSJ9.QEZvpcyuj2zv01b3eED7hRl5Qu9CUSpA71UimNwryexN19lAQfFbNmbajfcL5Xdfrn0x6hFN3acurk2rg-aNYouaxhugXDznE_ftNJ9-oAmrRxOWAE6boW8d1-S5q27Kwg0cDHlFkP-qfpNjTBY-086KqH3P5Ab4af_tUcq9uwz0muJuU06LurSpZfHaT3x7e39Kc_O755FpsJLUulWTGFV56uqF8mcpcFsBc4TUzTg.PYgIdnrKjUuAhkmKd9fK21QvMNdGtD8c-y5XlSx2u_I&dib_tag=se&keywords=camber+bolt+14mm+nissan&qid=1725286271&sprefix=camber+bolt+14mm+nissan%2Caps%2C216&sr=8-2
great!!!! can you please tell me what brand bar and where to purchase your front light mount bar where you led lamps are mounted too? it looks so good :)
50 inch light bar currently sold out fj cruiser light bar bracket www.amazon.com/KMFCDAE-Windshield-Mounting-2007-2014-Thickened/dp/B086YDNMPQ/ref=mp_s_a_1_2?crid=1D3I7Z002HC7Z&keywords=fj+cruiser+ride+bar+bracket&qid=1667487134&qu=eyJxc2MiOiIxLjU3IiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ%3D%3D&sprefix=fj+cruiser+ride+bar+bracket%2Caps%2C485&sr=8-2 light bar www.amazon.com/stores/page/00B51DDB-639F-48D6-AAEF-085155DAF916?ingress=2&visitId=3f1cc239-1550-413e-9e61-07b6b5ca93c7&ref_=ast_bln
Добавьте блоки и до 4 дюймов. Ударная пружина составляет около 1,5 дюйма. Поскольку угол наклона ведущего вала сильно меняется, попробуйте опустить двигатель, вставив проставку в опору двигателя.
I like it very much!!With the new height the wheels look a bit small.I think that 245/75R16 will fit and give the appropriate visual result and 12mm more height.
If the shock is expensive, you can weld the original shock stand and increase its length like that expensive long shock , Or you can make it from a thick iron plate with a bolt shock connection so that the original shock can be longer , And with that you can save your money and increase the height of your car and increase your savings
A good shock is very expensive and hard to get easily. It is common to raise the height with a spring, but it works very well. Think more about improving performance.
Compress the shock spring with a special tool and pull it out. At that time, if you remove the fixing bolt under the absorber, the lower arm can be lowered, making the gap wider and easier to remove. If you put the jack in and stretch it out, you can widen the gap more and make it easier to remove the shock spring. Because the rear of t31 has a multi-link structure, it is easier to do it like this. Of course you can replace it without using a jack.
Hi! I came across this video and really love the idea of raising the height to the X-trail T31 especially with the BFG tires, it looks incredible! I was thinking of doing the same thing to mine just to get the aesthetics, but a few things that I was wondering: 1) Is the KYB shock absorbers that you’re using have similar specs to the original Nissan shock absorbers? Or are they longer that factory standard? 2) Do I only need to purchase lengthier springs to get that “high look” like yours? Or are there more parts that I need to buy? Thanks!
KYB shock absorbers have a harder damper pressure than genuine, but have the same stroke length. Changing the spring alone will not do the same. A 4-inch block has been added separately. This is sold only in Japan and is not exported overseas.
Hermoso T31, felicidades. Una pregunta, tuviste algún problema al poner los neumáticos 240/70/16 ya que hay mucha diferencia en mm que la original, carretera velocímetro no marca bien, peligroso conducir a velocidad alta por carretera? Hay mayor desgaste de alguna pieza en el vehículo? Gracias.
Ciertamente, si instala el tamaño 245/70R16, se producirá un error en el velocímetro. Si el medidor marca 60 km/h, la velocidad real es 65,18 km/h. Si la lectura del medidor es 100 km/h, será 108,64 km/h. La altura del vehículo se eleva y los neumáticos se hacen más grandes, pero con este grado de diámetro exterior del neumático, no hay carga para el vehículo. Muy cómoda.
Indeed, it is said that the maximum lift for this vehicle is about 30 to 40 mm. In fact, a 4-inch block has been added to make it this high. You can see what the 4-inch block looks like in the video below. ua-cam.com/video/wD2ivz-Xsbo/v-deo.html&ab_channel=HeadwayDrive
@@HeadwayDrive thank you for the reply. I already have watched this video but I haven't really understood much. Have you lowered the differential? How it the total travel of the wheel? Do you remain with 1 wheel in the air a lot?
@@imcodex01 The front has a strut structure and the rear has a multi-link structure. With this type of vehicle, the tires often float when the body tilts. Therefore, even if you replace the springs, the limit of how much the tires can extend downward cannot be changed much. The video below talks about 4-inch blocks. ua-cam.com/video/hZUGj0aLu1s/v-deo.html&ab_channel=HeadwayDrive
I forgot the product name and number, but it is a normal lift-up spring. In addition to this, a 4-inch lift block is added. This block is only available in Japan.
Hi, where the lifting blocks on top of the Sturt's custom made? What else did you ha e to lengthen to get that rode height? I want to build one in new Zealand but there is very little information out there :/
Hi, great job and great video!! How do you solve the height sensor issue when you installed the lift kit? thanks in advance! Your comments will be usefull, i am doing the same job on mi T31 right now-
My vehicle's headlights are halogen, so after adjusting the beam, I use the adjustment dial to change the height according to the weight of my luggage.
Durch Erhöhen der Fahrzeughöhe durch Ersetzen der Federn wird die Antriebswelle belastet. Die Motorposition wurde abgesenkt, um die Belastung zu verringern.
It is a structure that can be removed by opening the back door, removing the interior panel, and removing the 8 mm nut. Double-sided tape is attached, so it's a little difficult to remove. Need a video answer?
@@HeadwayDrive Xtrail lift total 5.5 inches. When you exit the car after the 10km test run I noticed an after market instrument cluster on your dashboard. Maybe speedometer? Would be great if you could supply the name and model.
COMTEC radar detector ZERO 84V. By connecting with OBD, clock, calendar, engine speed, speed, bearing, altitude, vehicle voltage, mileage, G monitor, instantaneous fuel consumption, average fuel consumption, fuel flow, engine water temperature, engine oil temperature, exhaust temperature, intake manifold pressure , Boost pressure, engine torque, etc. can be displayed. This is a Japanese specification.
Hi, I have a Nissan Xtrail T31 2008. I need a lift. How high can I lift without changing geometry? Will the original 18 "wheels be good? What size 17 or 18 inch tires
This vehicle has struts in the front and multi-links in the rear, so the suspension doesn't extend very much. The 4-inch blocks raise the body itself, so the underside of the vehicle doesn't scrape even when going over big bumps.
What will happen if you only raise this car height by 3inches specer on front tyres and at the rear tyres and then put these tyres BF Goodrich 245/70/16 without lowering the engine or putting any 3 inches block underneath? Will there be any potential danger on driving?
If you raise the vehicle height by 1.5 inches or more, the inner boots of the drive shaft will break. As a countermeasure, lower the engine to avoid it. Please do not install 245 / 70r16 unless it is the same height as me. There is no problem when moving forward, but the tires, cover and frame will be scraped by interfering with the inner at the corners.
Do the suspension modifications give you more wheel travel/articulation too or just better ground clearance? I have a standard t31 x-trail and I am constantly disappointed by it's lack of off-road ability - there have been times when I haven't been able to get up the drive way in to my garage in the rain, the car has just sat there spinning its wheels! I don't think the Traction Control system is working properly because instead of braking the spinning wheel to send torque to the ones with traction the car will spin diagonally opposite wheels and not go anywhere, much to the amusement of my neighbours...
Certainly the X-Trail is not capable of excessive off-road riding. Since my vehicle is a diesel turbo and has torque, it can drive strongly. Is there a 4x4-i dial? This is to change the torque distribution to drive on muddy roads. It seems that some vehicles do not have this. It is possible to raise the minimum ground clearance by changing the suspension and springs. The choice of tire is also important. Block structure tires are breakthrough. However, since the weight of the tire increases, it affects fuel consumption.
@@HeadwayDrive I have the turbo diesel model with 4x4 too and yes, locking the centre differential does help in slippery conditions. My car will probably need new tyres before the end of the year, I might try some BF's like yours to see if that helps with traction. Your car looks good with the raised suspension, I like what you've done!
It's the same vehicle. I think there is not much difference between 6-speed and AT, so please change the tires. Required to improve performance. In addition, I have a sub-computer called Pedal Commander PC15 that easily improves engine performance.
Production and new car sales of the X-Trail T31 version have ended. Recent SUVs have a very low vehicle height. Probably because the purpose of use has changed to city riding. If you really want to increase the vehicle height, you have no choice but to replace the springs. The lift-up of 5.5 inches in total is only in Japan, considering the world. Had the T31 been sold in the U.S., lift kits would have been around the world
Amazing! Any upgrades to the axles? They get really stressed when you lift (or lower) your car. I got a 3cm lifted Renault Duster 2L petrol with the same all mode from Nissan, it is a really capable traction system for off road!
The 4WD system that high attractiveness is attractive is the same as xtrail. I have not upgraded the axles, but I am considering strengthening the brakes. Renault Duster is not sold in Japan, but I have seen imported cars. .
Hello San, I plan to use tire&rim set 225/75 R16. Will it fit on the stock suspension? What is the maximum tire diameter can be used on T31? Arigato...
Good day. very nice work. I am from Slovakia - Central Europe. I tried to get a spring but I got an answer that I can not buy, they were OME 512 and 513. please where you bought yours, you can send a link. well thank you
With replaced recoil spring is longer,is the shock absorber also replaced,and how about comfort....thank you for thi tutorial..i will apply it to xtrail in 2012...and success for you...good job.😀👍👍👍
Wahyu Yudha Yudha The breakthrough is improved by replacing the spring. But comfort is lost. If you replace it with a long stroke absorber, you will be able to maintain comfort.
@@HeadwayDrive yes the total length of the spring before how much it was, and now after you have replaced with the new one how long are the new springs installed?
HEADWAY-DRIVE but still what would you recommend. So if I want to put T/A BFGOODRICH KO2 245/70/R16 what lift kit do I need and can I keep the same offset rims?
In addition to the lift-up spring, a 4-inch block is assembled. This is sold only in Japan and is not exported. The 245 / 70r16 cannot be installed because the 245 / 70r16 contacts the inside even if the vehicle height is increased only by the spring. 225 / 70r16 can be installed for a normal vehicle height, and 235 / 70r16 can be installed for a lift up of about 1 inch.
Я на 3 см проставками увеличил клиренс наX-trail Т31, так пыльники внутренних шрусов даже оригинальные не проходят у меня и двух тысяч км, пришлось ставить от нивы полиуритановые, с колхозом конечно, но на них уже тысяч 15 откатал
How do they differ because on your video I can see front springs has 8rounds the same as rear springs 8 rounds. I think the length are the same. What make it differs?
good work I thought the car was in good hight in the first place anyway can you or someone else provide any japanese website that ship goods abroad? thanks
Hi there, very nice work. I really like what you have done and I'm a big fan of Japanese people tradition and cars. Bike's to I have a nice Yamaha fz6n but anyway, I I'm looking around for a 4x4 and I love the Nissan x-trail I just don't know if I should get the petrol or diesel engine and I can't afford more than a x-trail at the moment but I love being in nature. Great work love what you have done with yours
Thank you, I'm glad to sympathize that way. Both cars and motorcycles can make your daily life fun. What I do may be small, but I believe it can move more people.
![[4x4 Тест] Ниссан X-Trail T31. Особенности ESP на бездорожье.](http://i.ytimg.com/vi/G6uXLc-JvDE/mqdefault.jpg)
🇦🇺👍🏾 this is the first video of a Japanese person doing a lift kit I really in joyed it well done mate
The lift up will improve your breakthrough and make camping more fun. We will make efforts to further improve the vehicle performance.
Hello, Nissan X-Trail tuning artist! This kind of tuning is very exciting! I have the same Nissan, and also a diesel. I really like this car. Despite its age, it is good! If you have any drawings or sketches with the dimensions of the parts to increase the clearance, I would be very grateful if you share them. Perhaps there were some difficulties in the design during the work, please share. I do not see the right front side member on your car, or has it been changed? The air intake pipe structure is not yet visible. A very interesting device for placing a spare wheel. You are a great master! I wish you interesting thoughts and solutions.
Thank you so much for this video, I have already managed to bring up my car and I already put this tyre BF Goodrich 245/70/16 and the car is running very well with the tyre, but I was asking myself why the front on suspension member is not up, now I have learnt again from you about lift up springs, and am gonna find that brand and put on my Xtrail T31 too, Currently my Xtrail T31 looks exactly up like your Xtrail, before putting these springs, now i hope with the springs it would go up again and be like yours, Friend your videos are very helpful to me, very helpful, may God bless you for sharing these ideas, am so happy with these ideas.
Thank you for loving the video. This project enhances the possibilities of x-trail. I hope you continue to customize as well
r32 rims on lifted x-trail with BFG looks very nice!
Thank you, this combination with this wheel is coolest.
Omedetôo! I have a T30 2.5. I saw first time in 2003 a X-Trail when i have been in Japan for work.I Love Japan and 13 years ago i'm come back to Brazil. Great upgrade and the R32 wheels match perfectly with your T31!
Thank you for your success in Japan. Everything you see will be useful in Brazil. Thank you for loving my vehicle.
Love your video mate. Really well explained!!
Thank you for watching. I hope this helps someone who is in the same vehicle.
mate she is a beast!!!!!
I loveJapan style lift-ups!
Very nice
Thank you, I see, such a way of thinking is very helpful.
Спасибо тебе большое, друг!
Спасибо за просмотр
Thank you for the video.
What tyre and rim size you used and the brand of the springs?
The tires used at this time were BFGoodrich All-Terrain ko2 245/70R16. They have now been changed to Trail Terrain of the same size. The wheels are genuine R32 Skyline, 8J16 +30. The springs are 968 mode rings made in Japan, and any manufacturer is fine as long as they can lift the car by about 30mm.
Did you adjust the hole on the shock absorber for the Camber bolt, seems they are wide. Kindly share where we can buy the camber bolt that fits this vehicle.
The camber bolt that fits is 14mm.
www.amazon.com/TRQ-Suspension-Camber-Adjustment-Passenger/dp/B09HWWPZMD/ref=sr_1_2?crid=9FQP87BRKY70&dib=eyJ2IjoiMSJ9.QEZvpcyuj2zv01b3eED7hRl5Qu9CUSpA71UimNwryexN19lAQfFbNmbajfcL5Xdfrn0x6hFN3acurk2rg-aNYouaxhugXDznE_ftNJ9-oAmrRxOWAE6boW8d1-S5q27Kwg0cDHlFkP-qfpNjTBY-086KqH3P5Ab4af_tUcq9uwz0muJuU06LurSpZfHaT3x7e39Kc_O755FpsJLUulWTGFV56uqF8mcpcFsBc4TUzTg.PYgIdnrKjUuAhkmKd9fK21QvMNdGtD8c-y5XlSx2u_I&dib_tag=se&keywords=camber+bolt+14mm+nissan&qid=1725286271&sprefix=camber+bolt+14mm+nissan%2Caps%2C216&sr=8-2
great!!!! can you please tell me what brand bar and where to purchase your front light mount bar where you led lamps are mounted too? it looks so good :)
50 inch light bar currently sold out
fj cruiser light bar bracket
www.amazon.com/KMFCDAE-Windshield-Mounting-2007-2014-Thickened/dp/B086YDNMPQ/ref=mp_s_a_1_2?crid=1D3I7Z002HC7Z&keywords=fj+cruiser+ride+bar+bracket&qid=1667487134&qu=eyJxc2MiOiIxLjU3IiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ%3D%3D&sprefix=fj+cruiser+ride+bar+bracket%2Caps%2C485&sr=8-2
light bar
www.amazon.com/stores/page/00B51DDB-639F-48D6-AAEF-085155DAF916?ingress=2&visitId=3f1cc239-1550-413e-9e61-07b6b5ca93c7&ref_=ast_bln
凄いですね！拝見させて頂き感動しました。トータルで部品代は、いくらくらいかかりますか？
自分もやってみたいです。
スプリングだけでしたら6〜７万くらいで購入できるでしょう。
自分で交換を行うとなると、ある程度の工具が必要です。
４インチブロックはまた別の話になります。
ありがとうございました😊
Greating from Lithuania 🇱🇹😉
Hello Lithuania
こんにちは👋
ちょうど71mmリフトアップしたよ😀
フロントキャンバーは簡単に補正することができますが、トレーリングアームのリアボルトは、キャンバーを補正するディフに近く、リフトを固定するのに十分な調整が可能ですか？
そうでない場合は、リアキャンバーをどのように調整していますか?
ありがとうございます。
71mmリフトおめでとう。
車両を後ろから見ると、デファレンシャル横のロアアーム固定ボルトに目盛り付きのプレートがあるはずです。
ボルトを緩めてプレート位置を変えるとキャンバー角が変化します。
@@HeadwayDrive こんばんは、お返事ありがとうございます。
今日お店に行ったのですが、下側のトレーリングアームのキャンバーボルトの調整が限界だと言われました。 これがどういうことなのか理解できません。リフトが追加される前に9681インチのスプリングを持っているので🤔トラックを持ち上げてボルトをもっと回してみます。
その店は、アフターマーケットキャンバーボルトまたは調整可能な下部トレーリングが0キャンバーを達成するために必要だと私に言いました。 沖縄はサポートが少ないのでお返事よろしくお願いしますthere
どう思いますか?
ありがとうございます。
足の指の出し入れはどうですか？ 私のは直らないといけない😢
突然の質問で申し訳ありませんが、リアサスペンションのコイルスプリングの上下のゴム製の純正部品につきまして左右分の部品番号は教えて頂けないでしょうか？
フロントのアブソーバーブーツ左右の純正部品番号も知りたいのですが…
リアサスペンションの上のゴムが55034-EN101
下が55032-EN00Aで左右とも同じです。
フロントサスペンションのブーツは蛇腹部分でしょうか?
左右とも同じ品番で54050-JD034です。
尚、品番変更になっている場合があります、参考にしてください。
ご連絡頂き有り難う御座いました、早速ディーラーへ注文して参ります。
I'm going to get a 4x4 and considering a T31, I'd like to have same as yours it looks great. Great video thanks.
The X-Trail is a middle-sized SUV, but it can carry a lot of luggage. Evolve your vehicle to suit your taste
@@HeadwayDrive Yes but how do i get that height gain if Japan is not exporting the kit? Are there other options i wonder.
Здравствуйте ещё раз! Подскажите на сколько вы подняли передок чтобы не вырвало привода Спасибо 🙏
Добавьте блоки и до 4 дюймов. Ударная пружина составляет около 1,5 дюйма.
Поскольку угол наклона ведущего вала сильно меняется, попробуйте опустить двигатель, вставив проставку в опору двигателя.
Amazing Video very enjoyable to watch full of very interesting information
Thanks for watching. I'm glad you enjoyed this video
I like it very much!!With the new height the wheels look a bit small.I think that 245/75R16 will fit and give the appropriate visual result and 12mm more height.
Certainly the wheel is a little smaller, so it seems necessary to cut the wheel house to fit larger tires. I have no courage
Why do we need to use a jack and remove the shock bolt? Can't we just use the compressor to take the spring out and put it back straight forward?
what part of the video are you talking about?
@@HeadwayDrive for the rear springs
If the shock is expensive, you can weld the original shock stand and increase its length like that expensive long shock , Or you can make it from a thick iron plate with a bolt shock connection so that the original shock can be longer , And with that you can save your money and increase the height of your car and increase your savings
A good shock is very expensive and hard to get easily. It is common to raise the height with a spring, but it works very well. Think more about improving performance.
in front beside the link have lift kit mounting yaa, but at rear i didnt see lift kit except link per
There is a 4 inch block between the body and member
Excelente 👍
thanks!
Great job 👍🏻
Thank you, I can rest assured it is safe.
お疲れ様です！
キャンバーボルトですがフロント用は売ってるのですがリア用がAmazonなどで売られていません。どのようなものを購入すれば良いのでしょう？
T31エクストレイルのリヤ側はマルチリンク構造なので、キャンバーを調整する時はロアアームのボルトを回転させて変更します。
なのでキャンバーボルトは使用しません。
車両を後ろから見ると、ロアアームの付け根にボルトとメモリ付きのプレードがあるはずです。
@@HeadwayDrive 本当に助かりました！
ありがとうございます！これからも動画投稿楽しみに待ってます！
Мужик молодец!!!
Спасибо!!
Could you explain more why we need to use the jack at 1:53 ?
Compress the shock spring with a special tool and pull it out. At that time, if you remove the fixing bolt under the absorber, the lower arm can be lowered, making the gap wider and easier to remove. If you put the jack in and stretch it out, you can widen the gap more and make it easier to remove the shock spring. Because the rear of t31 has a multi-link structure, it is easier to do it like this. Of course you can replace it without using a jack.
自分もいよいよ来月にコイルによる30mmリフトアップをする予定なのですが、キャンバーボルトはフロント左右に１本ずつ、計2本で良いのでしょうか？
また、キャンバーボルトは「このメーカーの物が良い」みたいなのはあるんでしょうか？
リフトアップ 楽しみですね。
私はLargus ラルグスのキャンバーボルトを使用しています。
メーカーによって仕様が異なるので写真で見比べをし調整しやすさで選びました。
@@HeadwayDrive ありがとうございます！タイヤは4本なのでてっきりボルトも4本必要なのかと思っていました！さっそく購入しようと思います！
Hi! I came across this video and really love the idea of raising the height to the X-trail T31 especially with the BFG tires, it looks incredible! I was thinking of doing the same thing to mine just to get the aesthetics, but a few things that I was wondering:
1) Is the KYB shock absorbers that you’re using have similar specs to the original Nissan shock absorbers? Or are they longer that factory standard?
2) Do I only need to purchase lengthier springs to get that “high look” like yours? Or are there more parts that I need to buy?
Thanks!
KYB shock absorbers have a harder damper pressure than genuine, but have the same stroke length.
Changing the spring alone will not do the same. A 4-inch block has been added separately.
This is sold only in Japan and is not exported overseas.
Great! Thank you so much for the info!
@@HeadwayDrive Hello!) You made A 4-inch block by yourself)) isn't it?
This is a commercial product, but it is not sold for export because it is sold only in Japan.
Headway Drive Okey-Okey)) But You made a good job with this product, You need to trade it for export!))
Good effort buddy 👍🇦🇺
thank you!!
Hello for what you don't use camber bolt in the rear please ?
The rear side has a structure that allows you to adjust the camber angle. This is located on the member side of the lower arm fixing bolt.
Hi can you show how to replace reversing light bulb on Nissan xtrail NT31 - thanks.
ua-cam.com/users/shortsAao8ZBXBnd0
There is a short video on how to remove the reverse light
❤ Xtrail. Is it possible to do that with T30 brother?
It is possible if you use a lift spring for T30.
Hermoso T31, felicidades.
Una pregunta, tuviste algún problema al poner los neumáticos 240/70/16 ya que hay mucha diferencia en mm que la original, carretera velocímetro no marca bien, peligroso conducir a velocidad alta por carretera? Hay mayor desgaste de alguna pieza en el vehículo?
Gracias.
Ciertamente, si instala el tamaño 245/70R16, se producirá un error en el velocímetro. Si el medidor marca 60 km/h, la velocidad real es 65,18 km/h. Si la lectura del medidor es 100 km/h, será 108,64 km/h. La altura del vehículo se eleva y los neumáticos se hacen más grandes, pero con este grado de diámetro exterior del neumático, no hay carga para el vehículo. Muy cómoda.
Any problems with arms, planetaries, connecting rods after doing this? (Because people say 5cm is max lift for the way this car is built)
Indeed, it is said that the maximum lift for this vehicle is about 30 to 40 mm. In fact, a 4-inch block has been added to make it this high. You can see what the 4-inch block looks like in the video below. ua-cam.com/video/wD2ivz-Xsbo/v-deo.html&ab_channel=HeadwayDrive
@@HeadwayDrive thank you for the reply. I already have watched this video but I haven't really understood much. Have you lowered the differential? How it the total travel of the wheel? Do you remain with 1 wheel in the air a lot?
@@imcodex01 The front has a strut structure and the rear has a multi-link structure. With this type of vehicle, the tires often float when the body tilts.
Therefore, even if you replace the springs, the limit of how much the tires can extend downward cannot be changed much.
The video below talks about 4-inch blocks.
ua-cam.com/video/hZUGj0aLu1s/v-deo.html&ab_channel=HeadwayDrive
Hello, the car looks great. What car does the new white springs come from?
This spring is sold only in Japan
I also have a 2011 Nissan xtrail nt31 and wants too lift it but, what's the name of the springs that you used....thanks for any assistance
I forgot the product name and number, but it is a normal lift-up spring. In addition to this, a 4-inch lift block is added. This block is only available in Japan.
Hi, where the lifting blocks on top of the Sturt's custom made? What else did you ha e to lengthen to get that rode height? I want to build one in new Zealand but there is very little information out there :/
I get this height by replacing spring and adding blocks.
If you can make a block, you can do the same.
ua-cam.com/video/76SQIIDqUsc/v-deo.html
Where can I get a complete lift kit like these?
This product is only sold in Japan and is not exported overseas.
Здравствуйте. А как выполнен лифт задней подвески: специалый подрамник ?
Это связано с тем, что 4-дюймовый лифт-комплект зажат между элементами подвески. Это доступно только в Японии
Hi, great job and great video!! How do you solve the height sensor issue when you installed the lift kit? thanks in advance! Your comments will be usefull, i am doing the same job on mi T31 right now-
My vehicle's headlights are halogen, so after adjusting the beam, I use the adjustment dial to change the height according to the weight of my luggage.
@@HeadwayDrive Iam talkin about the height sensor in the rear wheels, not about the lights.
Well done. Thanks!
Is it better to drive now on tarmac (I mean more like sport car which doesn't lean so much when you take a corner)?
Actually, even in this state, the cornering vehicle does not tilt much.
Amazing job my friend! Regards from Brazil!
Thank you Brazil, please refer to the video.
こんにちは、いつも参考にさせていただいてます
ありがとうございます。
質問いたします。
リフトアップをしたいのですが
街乗り&軽い山地程度であればショックなど変えなくても、コイルスリングだけで大丈夫でしょうか？
知識不足ですが、ショックはリフトアップするのには特に関係ないのかなと思っていますが、その認識でよろしいでしょうか？
一応タイヤはグッドリッチを入れるつもりでいます。
アドバイスお願いします。
街乗りと山道走行でしたら、スプリングのみで良いかと思います。
私は登山に行くので車高を上げていますが、ショックとスプリングセットで販売している高価なものは必要性を感じませんでした。
ショックは純正のままスプリングのみを交換する方は多いです。
時にはリフトアップ時にヘタったショックごと交換する方もいます。
車両が重いせいか、乗り心地は特に変わることもありませんでした。
BFGのタイヤは結構重いです、本当に重いです。
R32ホイールとの組み合わせで28kgあります。
なので、ガソリン車ですと出だしがもっさりすると思います。
あと、ロードノイズが出ます、
林道などでは何も気にならないですが、アスファルトは響きます。
道路によって音が変わることもありますね。
とても丈夫なタイヤなので購入しましたが、よく山に行く私でも宝の持ち腐れ感があります。
エクストレイルt31 リフトアップと検索をしてあらゆる情報を見比べてください。
車両の進化を期待します。
@@HeadwayDrive 有難うございました、とても参考になりました。引き続き動画楽しみにしてます♪
can i ask for the location. sale of shockbreakers and springs, i want to buy. through my friend who works in japan
You can find similar parts by searching
初めまして。
とても参考になっております。
フロントのキャンバーボルトですが、太さは何㎜をご使用されておりますでしょうか？
宜しくお願いいたします。
キャンバーボルトはM14です。商品によって形状等が微妙に違いますね。
@@HeadwayDrive お返事ありがとうございます。ヤフオクを見ると色々出ていますね。
Largus を選ぶか値段でヤフオクを選ぶか悩みどころです。。。
@@oyadai7380
値段は高いですが、私はLargusを使っています。
Hi, are you still running the original size shocks, and did they survive the lift?
The height of the car has been raised so far, but the shock remains genuine. Considering high stroke shock
@@HeadwayDrive Thanks, amazing that the shock can handle such a big lift. Nissan made a strong truck :)
Genial. Hab leider nichts verstanden?? Ist diese Höherlegung alltagstauglich?? Mir wurde gesagt das das nicht geht wegen der Antriebswellen.
Durch Erhöhen der Fahrzeughöhe durch Ersetzen der Federn wird die Antriebswelle belastet. Die Motorposition wurde abgesenkt, um die Belastung zu verringern.
You do good work! I wish I kept my X-Trail...
It's been 10 years since I bought it with a new car. Traveling in this vehicle is fun and unavoidable.
Hi there, can you show how to remove and replace the hi-stop/ third brake light on the T31 please - thanks.
It is a structure that can be removed by opening the back door, removing the interior panel, and removing the 8 mm nut. Double-sided tape is attached, so it's a little difficult to remove.
Need a video answer?
Yes please can you show on video how to do it
@@willyi3456
Okay, take a video
@@willyi3456
I posted a video of removing the high mount stop lamp. please refer
Hi , i cant find the video that you mentioned, can you show it to me pls thanks.
Здравствуйте! Подскажите. через сколько километров вы меняете масло в вариаторе? Спасибо!!!
Мы рекомендуем заменить масло в вариаторе не позднее, чем на 40000 км.
Делай частичную замену через каждые 30т.км. По 4 литра меняй.
What instruments do you have on your dashboard on the right hand side. Looks like it's plugged into the OBD?
Which video are you talking about?
@@HeadwayDrive Xtrail lift total 5.5 inches. When you exit the car after the 10km test run I noticed an after market instrument cluster on your dashboard. Maybe speedometer? Would be great if you could supply the name and model.
COMTEC radar detector ZERO 84V. By connecting with OBD, clock, calendar, engine speed, speed, bearing, altitude, vehicle voltage, mileage, G monitor, instantaneous fuel consumption, average fuel consumption, fuel flow, engine water temperature, engine oil temperature, exhaust temperature, intake manifold pressure , Boost pressure, engine torque, etc. can be displayed. This is a Japanese specification.
@@HeadwayDrive oh wow! Thanks , I will get one!😁
The tire size is 245 / 70r16
カッコいいスタイル！
こちらのスプリングはどちらのメーカーですか？
購入先のリンクをどうぞ。
比較的安い価格のアップコイルです。the-customlab.easy-myshop.jp/c-item-list?category_id=14&parent_category_id=11
Where you bought this lift? Generally where you can buy lift kits for Nissan x trail t31?
I am adding a 4-inch block in addition to the spring. Blocks are sold only in Japan. The distribution of lift-up springs outside Japan is unknown.
Hi,
I have a Nissan Xtrail T31 2008. I need a lift.
How high can I lift without changing geometry?
Will the original 18 "wheels be good?
What size 17 or 18 inch tires
Do you want a 4 inch lift? If not, use a simple lift spring.
What use is lifting, to give better clearance underneath?
This vehicle has struts in the front and multi-links in the rear, so the suspension doesn't extend very much. The 4-inch blocks raise the body itself, so the underside of the vehicle doesn't scrape even when going over big bumps.
@@HeadwayDrive ok thanks!
Ich habe einen alten T30 und höher legen sieht nicht nur cool aus, macht auch Sinn wenn es ins Gelände geht. (zur Jagd).
What will happen if you only raise this car height by 3inches specer on front tyres and at the rear tyres and then put these tyres BF Goodrich 245/70/16 without lowering the engine or putting any 3 inches block underneath? Will there be any potential danger on driving?
If you raise the vehicle height by 1.5 inches or more, the inner boots of the drive shaft will break. As a countermeasure, lower the engine to avoid it. Please do not install 245 / 70r16 unless it is the same height as me. There is no problem when moving forward, but the tires, cover and frame will be scraped by interfering with the inner at the corners.
Can you please tell me what is spring brand? and rear spring bush part number?
I forgot the brand and part number of the rear spring, but I know the part number of the bush. Upper bush 55034EN101. Lower bush 55032EN00A
Do the suspension modifications give you more wheel travel/articulation too or just better ground clearance? I have a standard t31 x-trail and I am constantly disappointed by it's lack of off-road ability - there have been times when I haven't been able to get up the drive way in to my garage in the rain, the car has just sat there spinning its wheels! I don't think the Traction Control system is working properly because instead of braking the spinning wheel to send torque to the ones with traction the car will spin diagonally opposite wheels and not go anywhere, much to the amusement of my neighbours...
Certainly the X-Trail is not capable of excessive off-road riding. Since my vehicle is a diesel turbo and has torque, it can drive strongly. Is there a 4x4-i dial? This is to change the torque distribution to drive on muddy roads. It seems that some vehicles do not have this. It is possible to raise the minimum ground clearance by changing the suspension and springs.
The choice of tire is also important. Block structure tires are breakthrough. However, since the weight of the tire increases, it affects fuel consumption.
@@HeadwayDrive I have the turbo diesel model with 4x4 too and yes, locking the centre differential does help in slippery conditions. My car will probably need new tyres before the end of the year, I might try some BF's like yours to see if that helps with traction.
Your car looks good with the raised suspension, I like what you've done!
It's the same vehicle. I think there is not much difference between 6-speed and AT, so please change the tires. Required to improve performance. In addition, I have a sub-computer called Pedal Commander PC15 that easily improves engine performance.
Is Nissan still making this Nissan Xtrail T31 version ? And why they can't make it 5.5 inches up to satisfy their customers who want that height?
Production and new car sales of the X-Trail T31 version have ended. Recent SUVs have a very low vehicle height. Probably because the purpose of use has changed to city riding. If you really want to increase the vehicle height, you have no choice but to replace the springs.
The lift-up of 5.5 inches in total is only in Japan, considering the world.
Had the T31 been sold in the U.S., lift kits would have been around the world
@@HeadwayDrive why T31 Xtrail not sold in US?
Amazing! Any upgrades to the axles? They get really stressed when you lift (or lower) your car. I got a 3cm lifted Renault Duster 2L petrol with the same all mode from Nissan, it is a really capable traction system for off road!
The 4WD system that high attractiveness is attractive is the same as xtrail.
I have not upgraded the axles, but I am considering strengthening the brakes. Renault Duster is not sold in Japan, but I have seen imported cars.
.
Hello San, I plan to use tire&rim set 225/75 R16. Will it fit on the stock suspension? What is the maximum tire diameter can be used on T31? Arigato...
In the case of normal vehicle height, it can be installed if it is 225 / 70r16.
225/75 r16 may interfere with the inner,
I put a lift kit on my X Trail too now so she handles better on the road and off road
Lift-up and tire change unlocks vehicle potential
リフトアップスプリングいいですね(ﾟ∀ﾟ)
32のホイルもすごく似合ってます。
カッコいい(≧∀≦)
また見晴らしが良くなって乗りやすくなりました。
32ホイールは昔から好きで、かなりお世話になっています。
夏、冬、スペアと９本体制です。^ ^
カッコいいです！
俺のハイラックスもリフトアップしたいけど金がなくて、この動画を見てたら早くやりたくなりました！
SR大好き
ハイラックス良いですね、私もピックアップに憧れていた時期もありました。
ラダーフレームのリフトアップは、どこでも行ける車になるでしょう。
Good day. very nice work. I am from Slovakia - Central Europe. I tried to get a spring but I got an answer that I can not buy, they were OME 512 and 513. please where you bought yours, you can send a link. well thank you
In Japan, automobile parts are abundant. However, there are not many shops that export overseas. Please use a major online shop
@@HeadwayDrive Thank you for your answer. please it would be possible to receive mail. I would like to ask for advice. thank you
With replaced recoil spring is longer,is the shock absorber also replaced,and how about comfort....thank you for thi tutorial..i will apply it to xtrail in 2012...and success for you...good job.😀👍👍👍
Wahyu Yudha Yudha
The breakthrough is improved by replacing the spring. But comfort is lost. If you replace it with a long stroke absorber, you will be able to maintain comfort.
...dałeś same dłuższe sprężyny? ja chce zrobić lift 5cm i to mi wystarczy,dodam rozpórke kielichów przednich żeby buda nie pracowała...
Po zastąpieniu go sprężyną podniesioną wysokość pojazdu wzrośnie o około 3 cm.
Please What are the needed parts to lift 5 inch height? And where to buy?
Includes a 4-inch block kit. In this video, the spring is changed to make the vehicle height even higher.
What was the size of your springs before and what was the size of the new one. Kindly reply let me know.
Is it the total length of the spring?
@@HeadwayDrive yes the total length of the spring before how much it was, and now after you have replaced with the new one how long are the new springs installed?
Сделай обзор своих дисков на авто.очень понравились.
👍.гудрич прям смотрится атас)
こんばんは。
約3cmスペーサーでリフトアップしたNT31ガソリン車に乗っています。
同じようにスプリングで更にリフトアップしても大丈夫でしょうか？
スプリングで更に車高を上げるとドライブシャフトに負担がかかります。
角度が増しブーツの破れ、外側のCVジョイントの早期損傷を及ぼす可能性が増えてしまうでしょう。
返信ありがとうございます。
林道へ行くと底を擦る事があるのでもう少し上げたかったのですが・・・了解しました。
hello, what kind of shock absorber and spirals do you occupy
The shock has almost the same performance as the genuine one. This lift-up spring raises the vehicle height by about 30mm.
Здравствуйте друг. Подскажите, что за пружины вы поставили? 👍
V dopolneniye k pruzhine vstroyen 4-dyuymovyy pod"yemnyy blok.
Thanks for the subs.Great car!Uv gone so far ,please see if u got some longer shocks as i doubt current ones would last after the spring change.
Thank you. After changing the spring, the absorber is stretched. The ability to absorb shock will be inferior. Long absorber is hard to find.
@@HeadwayDrive so just standerd shock with new spring is what u have..lookd great..i wanna do now on mine😁
What’s the Coils Spring Brenda name and number? Does it gonna work or T30?
This is a T31 spring sold in Japan. I do not know the product number.
HEADWAY-DRIVE but still what would you recommend. So if I want to put T/A BFGOODRICH KO2 245/70/R16 what lift kit do I need and can I keep the same offset rims?
In addition to the lift-up spring, a 4-inch block is assembled. This is sold only in Japan and is not exported. The 245 / 70r16 cannot be installed because the 245 / 70r16 contacts the inside even if the vehicle height is increased only by the spring. 225 / 70r16 can be installed for a normal vehicle height, and 235 / 70r16 can be installed for a lift up of about 1 inch.
HEADWAY-DRIVE ok, thx. I will go with 235/70r16 with the same 40 offset on my rims than.
フロント4インチ分のスペーサーはどこのものでしょうか？リアも入ってますか？
フロントサスペンション上やフロントメンバー上、リヤメンバー上などに挟み込まれています。以下足回りの詳細動画です。ua-cam.com/video/76SQIIDqUsc/v-deo.html
埼玉のロードハウスで取り扱いがあります。車高が40mm以上高くなるため構造変更が必要になります。ホームページを参照するか、かショップに来店して詳しく聞いてみてください。
roadhouse.co.jp/#prettyPhoto
@@HeadwayDrive ありがとうございます！
ちなみにこちらを検索したところ、車体持ち込みでないと難しいとの情報を得たのですが、キットのみ購入も可能なのでしょうか？
私もリフトキットのみでの販売が可能か尋ねましたが不可でした。
ステアリングシャフト延長や、マフラー加工などもしなくてはいけず、構造変更も必要なのでお任せすることにしました。
こんにちは❗
毎回楽しく拝見させてもらってます。
ところでリストアップはシャフトやベアリングに負担はかからないのですか❓
スプリングで車高を上げるとシャフトブーツに負担がかかります。
シャフトやベアリングなどは可動内であれば大丈夫かと。
ブーツの山と山が当たり擦れることで摩擦熱が生じていずれ破れると思います。
私は少し手を加えてブーツに負担がかからないようにしています、４インチ分のブロックにさらに加工しています。
ブーツの破れ防止でワコーズのSL シリコンスプレーを吹き付けておくと潤滑作用でブーツ破れを防止できます。
参考になります❗
ところでエンジン振動が気になりだしたのはいつ頃からですか❓
そうですね、去年の11月頃でした。
いろいろメンテナンスをしてきましたが、今でも振動はします。
DPFが関係していると思います。
有力な情報は得られていません。
多分エンジン本体は30万キロ位走っても問題ないですよね？
グリーンディーゼルは周辺部品が精密だからその辺が心配ですね。
Do you have a reference to lift Xtrail T30?
No, I don't know much about the t30 as I've been working on the t31.
@@HeadwayDrive verywell, thank you for your reply 🙏
Keep up the vlog..love your channel 🔥🔥
Только через глаза понимал. Молодец японский товарищ.
Спасибо, я верю в возможность x-trail
Поднял а глушитель весит(в конце видео видно), за всё цеплятся будет
Меня смущает ближний свет. Лампы живут от 3 дней, хотя я и покупаю не дёшево. Может есть этому объяснение или хитрость какая, что бы это исправить?
Фара имеет винт для регулировки оптической оси для регулировки высоты света
Винт регулирует высоту света, а как же с живучестью ламп?
czy masz może jakiś ...schemat lub wymiary tej nakładki nad amortyzator ( 10cm )
Blok na zawieszeniu ma około 10 cm. Ponadto dodano bloki do przednich i tylnych elementów.
Как такие ПРОСТАВКИ поставили? Привода не ломает?
Я строю 4-дюймовый блок, двигатель тоже на 4 дюйма вниз, поэтому он не сломается
@@HeadwayDrive ааааа! Теперь все понятно! А как это реализовано?
Посмотрите это и видео
ua-cam.com/video/76SQIIDqUsc/v-deo.html
What’s the size of your tires? Thanks
The tire size is 245/70R16, which is slightly larger than the stock.
Where do you buy the 5.5 inch lift kit Send me the website
Currently, this kit is only sold in Japan and is not exported.
Я на 3 см проставками увеличил клиренс наX-trail Т31, так пыльники внутренних шрусов даже оригинальные не проходят у меня и двух тысяч км, пришлось ставить от нивы полиуритановые, с колхозом конечно, но на них уже тысяч 15 откатал
Если не попытаться опустить двигатель, пыльники ШРУСа легко порвутся.
32ホイールカッコいいです！
ポン付けですか？
タイヤサイズ教えてください！
タイヤは245/70r16です。
このまま装着させていますがR32ホイールのオフセットが+30なので、フロントが約14mm,リアが約10mmフェンダーよりタイヤがはみ出ます。
ですのでモールを付けて車検対策しています。
4インチアップすればこのサイズのタイヤを装着できますが、ノーマルの車校でしたら225/70r16,
22565r17のサイズが良いです。
The coolest parts are the skyline r32 wheels
The skyline r32 wheels will give the best performance for any car.
@@HeadwayDrive Скажи друг пожалуйста какого размера твои диски и покрышки?
Колесо 16 x 8JJ 5H 114,3 вылет +30
Шины 245 / 70r16
@@HeadwayDrive Благодарю друг 👍
What rims and tyres are these?
i like it, but its normally on the highway ?
There is no problem with the highway
先日1.2インチのコイルと40ミリとスペーサーでリフトアップしたのですが実物90mmも上がったんですよね‥
そんなことあるんですか？
1.2インチコイルと40mmスペーサーですとおよそ70mmですね。
コイルは少し誤差があり1.2インチ以上だったかもしれません。
1週間ほど走行すると伸びきったサスペンションが馴染んで下がることもあります。
@@HeadwayDrive 50キロくらい走らせましたがフロントは50mm、リアは80ミリで落ち着きました。こんなフロントとリアでばらつきあるんですね
@@hituji0917
だいぶ差がありますね。
ラゲッジに荷物を載せていない場合、リアは結構上がります。
私はサブバッテリーやスペアタイヤ、タイヤキャリアにヒッチメンバーなどで100キロほど荷重が掛かっています。
@@HeadwayDrive お疲れ様です。
差があるままなのでフロントに更に20mmのスペーサーを入れようと考え中です。その際、個体用の片側3本、合計6本のボルトを交換しないといけませんがボルトの材質に適正なものはあるのでしょうか？長いボルトになるので強度や耐久性がかなり必要かと思うのですが‥
@@hituji0917
追加のスペーサーを車体とサスペンション上部で共締めするということでしょうか。たしかにボルトがより長くなりますね。
7や10.9などの記載があるボルトにすれば良いかと思います。
ただし、スペーサー合計が40mmを超えると構造変更が必要になります。
構造変更しないのでしたら、車検事に外す必要があります。
Are these springs the same size for the front and for the back?
It ’s completely different.
No vehicle has the same front and rear springs.
How do they differ because on your video I can see front springs has 8rounds the same as rear springs 8 rounds. I think the length are the same. What make it differs?
The front and rear are the same 7 rounds, but the front spring has a larger outer circumference and is longer.
@@HeadwayDrive thanks so much for this clarification, what is the brand of the spring, or what are the best lift up springs?
The manufacturer used is 968 Motoring. If you want to improve the performance, the one made by Motorage is good.
good work I thought the car was in good hight in the first place anyway
can you or someone else provide any japanese website that ship goods abroad? thanks
If possible, I would like to ship parts all over the world and share the same joy, but there is no shop in Japan that can ship overseas.
@@HeadwayDrive where are you based?
Ciao mi dici dove posso acquistare queste molle io tengo un t30
X-TRAIL t30 e t31 hanno diverse forme di sospensione, quindi è necessario acquistarne una speciale. Non riesci a trovarlo negli acquisti su Internet?
Per t30 non trovo molle solo spessori da 4+
@@domenicorusso7157
Dovresti trovarlo su ebay ecc.
I never liked the x trail but this one looks very very cool
Thank you,I want to maximize the potential of X-Trail
Hi there, very nice work.
I really like what you have done and I'm a big fan of Japanese people tradition and cars.
Bike's to I have a nice Yamaha fz6n but anyway, I I'm looking around for a 4x4 and I love the Nissan x-trail I just don't know if I should get the petrol or diesel engine and I can't afford more than a x-trail at the moment but I love being in nature. Great work love what you have done with yours
Thank you, I'm glad to sympathize that way. Both cars and motorcycles can make your daily life fun. What I do may be small, but I believe it can move more people.
Can you share to me the link where I can get these springs
This spring is not currently for sale
@@HeadwayDrive why is not for sale nowadays?
Seems to be out of print
Nice. That’s R32 GT-R wheels or non-Gtr skylines Gtst etc.?
This is an R32 GT-R wheel, I own nine of this wheel.
キャンバーボルトはリアには必要ないでしょうか？
リア側には必要ないですよ。
What size are the camber bolts?? 12mm?
The camber bolt is 14mm. Indispensable item for lift-up
@@HeadwayDrive thank you for the response! I will be ordering mine today!
Can a 15" rim be fitted to the t31?
15 inch wheels cannot be used as they will come in contact with the caliper
@@HeadwayDrive Thank you sir