Imuplse sealers for sealing mushroom grow bags. We stock both of these units as well as an adjustable stand for the double jaw sealer!! myersmushrooms...
I always fold my bags back and double seal, one press isn't enough to make it through all the way - not as effective as having it thinner and longer but it works for starting out! Great videos.
Thanks Eric, but wish you would have made this video about 7 months ago. Yeah, I bought the cheap, hold it down, kind until I saw Andrew's on Mossy Creek and then again in an old Jewel vid. That is when I started researching the magnetic sealers. Wow, what a difference it has made in my bag production. Thanks again for all your vids. They have help me out enormously.
@@donnbialik9085 American International Electronic Inc. Model AIR-405HIM . I hope this will improve your bagging. 5mm seals are a lot better and sometimes I will double the seal width on seed spawn bags. I use a Unicorn 5 micron filter bag so I can sterilize sealed in the pressure cooker and not worry with too much moisture in my seeds. Not sure if you are starting out, but if you are not using a steam sterilization drum, you might want to think about making one. It will save you a lot of time sterilizing 32 6.5 lbs bags at a time on a 18 hour soak (steam). Good luck.
@@donnbialik9085 Myers Mushrooms is who designed this to begin with. You can watch his videos but you will need more info. I will provide that info for free.
@@donnbialik9085 you can also buy a plug and play from Bubba’s Barrels. Owner is a great guy, but you can build yourself and source your heating element and other plumbing parts for 1/3rd the cost.
I purchased the magnetic sealer. some bags at random the heat element will turn on but the magnet wouldn't hold causing the top of the sealer to fly open immediately. what is causing this?
Have you ever had success with pre-sealing? One of those weird areas where a small group of people seemed to have success and everybody else insists it's impossible. I have had some success, but haven't got it quite right yet.
thanks for all the great videos!! On the magnetic switch, would it help to replace the lock nut you mentioned with a nylon lock-nut? (steel (SS?) lined inside in part with nylon) Also, about the metal plate you want to use to cover the diamond-plate: I saw a plastic sheet for rolling out pastry dough at Dollar Tree, to try. It would make the incline nicely, and also lets things slide easily. I think though, I might change the mounting method for the sealer, so the diamond plate AND any other plate on the table wouldn't be needed. That helps with sanitation, avoiding those layers, and possibly avoiding adhesives too. Thanks again!
So after looking on Amazon I found one that says it has a 2 millimeter sealing width, but then the max of 7.9 millimeters. Will this work effectively? Please advise
Hey Eric, what is the brand and model number of this heat sealer? I can't find it. I usually go with american international brand but they look different. thanks!
lol Joana said she can cut my hair and 2 cuts in decided she cant do it 😆 they just opened up the local barber shops just haven't had a chance to hit em up
I always fold my bags back and double seal, one press isn't enough to make it through all the way - not as effective as having it thinner and longer but it works for starting out! Great videos.
I’m trying to start a small mushroom business and I really appreciate your videos man!!🤙
There is no trying.
What type of mushrooms?
How’s it going?
Thanks Eric, but wish you would have made this video about 7 months ago. Yeah, I bought the cheap, hold it down, kind until I saw Andrew's on Mossy Creek and then again in an old Jewel vid. That is when I started researching the magnetic sealers. Wow, what a difference it has made in my bag production. Thanks again for all your vids. They have help me out enormously.
Which one did you buy?
@@donnbialik9085 American International Electronic Inc. Model AIR-405HIM . I hope this will improve your bagging. 5mm seals are a lot better and sometimes I will double the seal width on seed spawn bags. I use a Unicorn 5 micron filter bag so I can sterilize sealed in the pressure cooker and not worry with too much moisture in my seeds. Not sure if you are starting out, but if you are not using a steam sterilization drum, you might want to think about making one. It will save you a lot of time sterilizing 32 6.5 lbs bags at a time on a 18 hour soak (steam). Good luck.
@@jrcicirello I actually just ordered that sealer! Now can you suggest some youtube videos on making the steamer?
@@donnbialik9085 Myers Mushrooms is who designed this to begin with. You can watch his videos but you will need more info. I will provide that info for free.
@@donnbialik9085 you can also buy a plug and play from Bubba’s Barrels. Owner is a great guy, but you can build yourself and source your heating element and other plumbing parts for 1/3rd the cost.
Just saved me a call to the manufacturer! THANKS AGAIN!
Like the new look
Amazing, so incredibly useful. Thank you!
I purchased the magnetic sealer. some bags at random the heat element will turn on but the magnet wouldn't hold causing the top of the sealer to fly open immediately.
what is causing this?
Very helpful. Thanks. Starting mushroom farm
I just bought a flow hood from you guys can’t wait
Have you ever had success with pre-sealing? One of those weird areas where a small group of people seemed to have success and everybody else insists it's impossible. I have had some success, but haven't got it quite right yet.
Cant wait to get my FFU! Those look sweet!
thanks for all the great videos!! On the magnetic switch, would it help to replace the lock nut you mentioned with a nylon lock-nut? (steel (SS?) lined inside in part with nylon) Also, about the metal plate you want to use to cover the diamond-plate: I saw a plastic sheet for rolling out pastry dough at Dollar Tree, to try. It would make the incline nicely, and also lets things slide easily. I think though, I might change the mounting method for the sealer, so the diamond plate AND any other plate on the table wouldn't be needed. That helps with sanitation, avoiding those layers, and possibly avoiding adhesives too. Thanks again!
is a home foodgrade 130W vacuum sealer powerful enough for the unicorn bags?
There are foot operated once on eBay for about $70.00. a are they worth using?
A 2mm seal wouldn’t work? I wish I saw this video prior.
So after looking on Amazon I found one that says it has a 2 millimeter sealing width, but then the max of 7.9 millimeters. Will this work effectively? Please advise
You want a 5mm element
are those your fan/filter units you use for flow hood?
Is a food saver safe sealer okay to use?
Hey Eric, what is the brand and model number of this heat sealer? I can't find it. I usually go with american international brand but they look different. thanks!
American International Electronic Inc. Model AIR-405HIM
What is that table top bag sealer called?
Check the link in the description for my website. Its a Double Jaw 10mm 18" Sealer.
What are your thoughts on the pp reusable clamps unicorn offers?
Ive only heard bad things about em
Links?
Did you find a model number? The sealers I'm looking at that are 18" with the foot pedal are way more than 700.
Couldn’t find them links did you take them down?
They are listed on my website myersmushrooms dot com
Hi! I'd love to buy one of your flow hoods. The 2'x4' I emailed you. I hope to do business soonfrom kensho sight
1st....strange but neat
Looks like someone attempted to cut their own hair while under the influence of psychedelics! Im kidding....... but only a little.
I was thinking he looked more like Maynard James Keenan with that
@@midnightmushroomco.2091 the perfect lyrics from Maynard for Eric "Whyyyyyy cant we just stay Sober"
lol Joana said she can cut my hair and 2 cuts in decided she cant do it 😆 they just opened up the local barber shops just haven't had a chance to hit em up
Dont be jealous
@@midnightmushroomco.2091 ooOoOOhh...I like that!!❤ Love me some Maynard!
Check out the links below. there aren't any :-(
It's Myers Mushrooms. Com we have both of these in stock. UA-cam won't let me link my company website
You must be an ex chef. Mise en place