Hello bro, please what is your advice about Rog strix GTX 1070Ti A8g is good for creator ?? For your informations im from Morocco and graphic cards prices is very high.
@@michalddddddddd I don't have first hand knowledge but have heard this multiple times recently when researching gpu for photo/video editing. From what I was hearing is that if you have 2 comparable gpu gaming wise that the amd will preform worse in other scenarios in generall and that is been seen with multiple video editing software a significant difference in performance and that this is because amd has done alot of software optimization with gaming but just isn't on the same level for other things. Hope that helps mlaybe others can share personal input. I was dissapointed by this as I was leaning towards a rx580 or a more budget friendly rx 570 but ended up putchasing a used gtx 1070 for a steal the other day🙂 so not too bummed after all.
That is a lie and that is personal preference. It’s like nvidia is to Mercedes Benz and AMD is like the Honda of today’s marketplace LOL. You just spew nonsense that is just a fanboy. Nothing to see here
Big thing to consider for 3D is, the rendering software you are using, which hardware utilization does it offer? Some offer good GPU utilization, some offer only CPU usage (for example Corona Render for C4D that I use), and some software can make use of a cpu+gpu combination. Also, can it use Cuda cores, RT cores, etc? Basically figure out what your specific software(s) make best use of, and taylor your build to that.
well, u can't go wrong with a fast mid range cpu + standard ram + nVidia RTX, I guess only Hollywood renders on 64 core Threadrippers cause they can just afford that, or their render farms can.
@@Brukner841 yep pretty much. And honestly if people have one-time needs for massive performance, there are many render farms online you can pay to use per-hour etc if you're in a pinch for an animation or similar long-rendertime work.
Not getting enough VRAM or to many fans is a good thing. LOL. What is wrong with three fans. More cooling at low fan speed LOL. It’s all personal preference and all modern GPU’s will do the work even edit on an RX570 8GB if you only use CapCut. But it’s rare for a true video creator to do this full time and pay 3k in bills every month from just working as a video editor. But most people are amateurs LOL
Someone just needs to make a list of gfx cards, which workloads they're suitable for, and how much to expect to *reasonably* pay without getting ripped off (too much heh)
Nice piece of advice ! I’d like to add the following, especially for 3D people out there doing GPU rendering : Maybe Consider getting a blower-style rtx card instead of an open-air 3fan design or Founder Edition. Yes blower are (much) harder to find. Yes they run louder BUT : -your whole system will have much better thermals since all the hot gpu air is going to be directly exhausted by the card whereas a FE or a 3fan will recycle most, if not all of it inside the case. I have a 3 fan MSI gaming X trio 3090 and I can assure you NO air at all is being exhausted through the rear IO, ALL the hot air is recycled in the case. This does also mean that the “fresh” air cooling down your cpu is actually going to be the hot air from the gpu…. not always ideal…. manageable with a single gpu, but if you go multiple gpu it can become a problem. -because they are 2 slots cards and not 3, if your power supply and your case can take it you could run 2 cards more easily or even 3 (I had 3 blowers in my previous build, 2x 2080ti 1x 3090 in a phanteks case upgraded with noctua fans, worked like a charm). This means the “ultimate” 19k threadripper pro 3D rendering workstation could even have been…. “ultimate-er” with 3 video cards ;) ^^ Of course Your motherboard layout needs to allow it as well (I’m building a Z690 system with 3 gpus and it’s a nightmare).
I got a screaming deal on a RTX 3080 like 75% off the regular price used and I found out why. It jus goes blank screen occasionally for a few seconds randomly. Now, for me I'm ok with it. I wish the guy would have been honest and told me the truth as he did not. But I just built this PC to do all my old home videos. I am not gaming with this PC. Even if i was, it does not happen often enough to be a huge problem but and I paid at such a deep discount I feel it was almost worth it. sometimes I can be using it for hours at a time and it never happens and it doesn't effect my home videos at all either. I am just saying, there is a higher price you pay when buying used and to some people this would be unacceptable.
You mentioned the media engines inside integrated graphics, good point. I know this is for creators, but it's still funny. Video editing is so niche, very few people actually do that. If I were to edit videos often, I'd just use an iPhone or something with monster media capabilities. A 3090 is for massive 3d scenes with particles, volumetrics, path tracing, not for video editing lol.
video editing isnt just cutting things out, moving things around, its color grading, noise reduction, motion graphics, these can get pretty intensive especially in 4k and above. No serious person is using a phone for this.
@@gmcubed yeah but the 80 20 rule really applies to video editing, most of it can be done on a phone, but the super editing sure will need the best you can offer.
2 роки тому+6
I honestly think the 3080 (at original MSRP) is like the best bang for buck if you are into 3d, video editing and other visual software, with some great gaming as a benefit. AMDs new offerings are nice, but they need to invent something similar to CUDA, cause the benefits for rendering and for other software like Adobe CC suite is just too much too overlook. And the 3080 definitely is a good buy even if the new generation is just on the horizon, should last you quite a while.
I am a photographer and also love making videos. I have been thinking so many times about which GPU I'm going to buy. I love how you review on the 3050 dual but I was also thinking of my monitor's maximum refresh rate for certain games. So I keep searching for which GPU can also satisfy me for gaming with a 175hz 1440p monitor. I will be going with 3060 ti. 3070 and higher-end GPU are too expensive and impractical for video and photo works.
I'm looking to build a new machine for some 4k 10bit 422 video editing in premiere pro and possibly resolve. I'm also wanting to be able to run AE as smooth as I can add well as blender. Coming from an MSI GS65 stealth laptop with a GTX 1660Ti with 16gb ram and an i7 9750( I think). Should I wait for the new AMD CPU's and the new Nvidia RTX 40 series?
Loving the content you are making. I'm not a professional creator (doing a bit of photography and gopro videography), I'm a 3D Cad guy working in shipbuilding. Since I'm doing that (around 25 years) I want to get all the stuff we create into a game engine to create some nice first person shooter like walkarounds. I've tried some stuff in Unreal Engine 5, it works, but my current desktop is totally outdated. I was wondering if you have any recommendations for an Unreal Engine 5 desktop.
What's the best graphic card for creators and architect that's use 3D softwares, like, blender, unreal, vray, and others. 3080 with more Rops and Unit of Mapping textures and Units of shadding, or 4070, with a newer techonologies, like Dlss 3.0?
I am a pro sound engineer and I don’t need expensive equipment to get the job done right. Same as when I edit personal videos. Any RX570 will edit smooth. CapCut is fun. And I don’t need any other editor.
editing with AMD is just fine. idk why yall hate on AMD so much, rendering times are good, video looks good, never corrupts we good here, maybe some of yall just need a better cpu
i have the pny 3060ti its about a year n while seeing reviews i have got positive reviews . so i bought it working as my daily video editing streaming , office workloads etc. except 4k rendering which takes time other is perfectly fine in this card . i have ryzen 5 5600x when i bought it in new i got it on cheap price . so its a big deal rtx 3060ti is a perfect for my daily workload .. i thought of getting 3080 or 3070 but i think 3060ti is so suitable for my all days works . here i m happy with what i bought in first place this is my 2nd gaming pc n first was laptop which was a crap can't game like my pc does it like a piece of cake just instant 😂 really this gaming pc is best choise i ever had in my life ... total price : $1800
my country is nepal so its expensive here to get even a gpu but when i bought it .. it was normal price not like now its so much expensive.. around 1800 to 2000 $ per each gpu .. 😭😭 i got that gpu in $535.20 / Nepalese price : NPR. 68,000/_
@@avgames7540 1080p video it takes around 10 to 15 min what ur running in ur background .. i have other backgrounds working so it takes 25min per 1 videos
@@avgames7540 its is slow then 3700x coz cores does matter .. higher the core count faster it render my videos .. but ya its not like i usually do render only so its like with doing work 25 min at max to render 1 videos which length is only 24min per videos
Man.... this is like an improvised video, and you know it... do you really know about GPUs ? tell us the truth, you know ? some of us know a little and we know you didn't talked about VRAM (the very first priority), drivers, VRM quality, overclocking (obviously OC models are better prepared to long working sessions due to its better components), memory speed, fans noise, heat (cause SSD is next to the GPU pci-e port and it gets overheat and this is a common problem for video creators)... man i'm not exagerating, it's a cool video but kind of improvising common sense sounding comments to me...
wait you can use the igpu in a cpu along side a GPU now??? i'm like 30 and have been building all my life but this is news to me, I saw some mining rigs ( not my forte or something i'm interested in AT ALL ) that used mixed gpus having problems on forums but I don't help fix crypto problems.
It's the connector thats rated for 150W on Pcie not the cable, how much power the cable can carry depends on it's diameter. Decent PSU's will have cables capable of delivering 300W no problem. The real problem occurs when you get power supplies that are multi rail garbage and might, for e.g, claim to be 600W but have 4 150W rails. Thats when trying to pull, say 200W from a single rail causes a problem. Get a single rail power supply that produces the full claimed power on its +12V rail, has a 5 year warranty or better, and is 80 plus bronze or better, and you wont go to far wrong.
For animation :The problem is slow core cpu's when simulating/FX or character animation. They don't use all the cores but those cores they use has to be very fast! But all that is mute when you need more then 12GB Vram due to your scene size then there is only one card to get especially for programs like Blender, 3090.
@@stormk-1130 I opened a mega scan file and then blender ... showed 8GB of vram before even loading anything. You are assuming no other programs are open ...
i am a creator who was waiting for the prices to go down but as they went down, i am hearing that next generation gpus will hit the market. Should i wait for them or should i buy the gpu now because i dont want to upgrade my build for a vey long time. And also, does faster m.2 translate to more video editing performance because i have a gen3 ssd.
If you dont want to upgrade for a long time than wait for the new upcoming cards. It is a bit of a gamble because you don't know if history will repeat itself but you should get more performance for your money if you wait. Theoretically.
Take Into consideration: The newer cards will have a larger power draw when working. The manufacturer may not have drivers ready for the style of work you are creating because the cards are so new. Last gen cards price will drop accordingly to save you money which would be better utilized on ram cpu and faster hard drive.
All nice tips but the one withe the cable is just trash because the connectors are rated for 150w not the cable so it doesn't matter if u use one cable for 2 pcie connector
Hi my friend, Love your channel man. I always refer to your videos because I feel like other channels will do/say whatever to get views. But you focus on better content quality for viewers. Thank you!
is the rtx 3060 Ti is good enough in video editing and Landscape rendering, cant figure it out which one of this gpu i gonna buy between rtx 3060 ti vs 3070 ti
I am nspired to become a video creator in iran. I dont have access to good reviews or information here. Thats why this video is beyond life saver. Unfortunately i have no information about subject you mentioned which others should already know. But fortunately , you linked your other videos so i can watch them and learn. All this valuable information is presented free . Thank you
I love this series.. u just saved me from buying F version intel cpu.. i can't thank you enough for that.. please make full video on thing before buying or building pc
@@darcybrown7369 its intel F Cpu.. Like 12600KF .. So if You by F Cpu There is no inside GPU in your processor.. So he was saying in one video that don't buy F version bcoz its not come with inbuild GPU hope u understand
One of my goals for 2024 is to learn digital audio and videography. My current plan is to edit on a 3900X and either a 2080Ti or a 2070 Super, all of them already on hand. I have faster CPUs, but I employ them elsewhere. I'm not planning on high volume but will be focusing on a trouble-free experience and quality results--at the expense of time. What I'm seeing as I explore GPUs and CPUs for running Resolve is that twelve Zen2 cores and either of those GPUs will be just fine. Anybody?
Great content. I'd like to add CUDA cores and Stream processors for consideration. Some use cases do work better with one or the other; at least from from my experience with 3D rendering.
@@3nertia mainly blender, did a bit of Maya but not sure how well it works with either now. From my experience, Cuda cores just render faster on average at the same price point. Cuda cores are basically nvidia's while stream processors are AMD's. Both are proprietary "graphics processors". They use different techs and require different configurations; so you do have to check for those.
I am glad I never got my 3060 from eBay now, I do not understand how people are still selling used 3090s nearly the same price as a brand new one next day delivery on Amazon, lol... Amazon got some half tidy deals on GPU's at the moment, Think eBay needs to catch up a little, I am actually taken back on how much used GPU's actually go for on eBay, When Amazon is next day delivered and brand new, I bought a 1660 super on eBay, So eBay good for GPU's like the 1660 but as far as the 3090's they still too expensive for some reason I don't understand....
You are Just suggesting but not straight forward to focus on quality build....!! Suggestions: Include all components Sir to build the system. (Make video like this)
Hey Guys, I need some help here... I'm in need of a graphics card, my 2060 super's VRAM is faulty, keeps on giving me both vram relatted bluescreens, and problems using After Effects. I have a ryzen 9 3900x, and x570 Auros Elite, 64gb of ram and use it mostly for compositing, motion design, 2D animation, both frame by frame and after effects. I'm starting to feel the weight of 2,5D compositions using 2k/4K assets. I'm kinda divided betweem the 3080 10gb, 12gb or going 3070. Does anybody have similar workflows that can give me an hint?
I just saw ur vids. AWESOME! Checked out some 3060 TI cards. There was single fan, double fan & triple fan. I know u said triple was not needed. Are the single fans adequate too? THANKS.
I have 3700x 32gb ram 3000mhz 240gb sata ssd , 2× hdd 2tb each Asus prime b550 m a wifi Rx570 4gb Cooler master mwe 650wt psu I want to upgrade my gpu to 3070, ti , 3080 Is my psu enough for these cards? And someone is selling inno 3d rtx 3070 twinnfan which is used for mining around 1year.... should i go for it or should i wait for new gen or should i purchase 30 series high end card?
I got an msi 3080 gaming z trio for 37000₹ equalant to 450 usd in india. It is still under warranty for an other year and half. Did i get a good deal on this?
I think my life is complete now. Since i've been following your channel, you kept reminding me of someone, but i couldn't tell who. Then i saw Jackass Forever en then it hit me. Are you related to Rob Dydrek?
month-late, but in case you haven't gotten an answer yet: igpu stands for Integrated Graphics Processing Unit and is a GPU that is built into your CPU (so any non-F Intel Core CPUs)
This was good information, however I was looking and hoping for a specific piece. Is there one card or another that is better with one piece of software or another? Case in point, Nvidia better with BlackMagic, or AMD better was Premier? Whatever the scenario, which card of these brands is better with which piece of software?
It’s all personal preference. Any modern GPU will do the work and most are amateur editors like me. And it’s rare for a video editor to make more than 3k a month to pay the bills. People today barely have 300-600 to spend freely LOL. I can do it al with my 730$ 7900x or just as well as an RX570 8GB. If you’re not a full time pro don’t spend more than 300$. It’s not worth it because you won’t ever see that return if you’re just an amateur. 98% we all are.
A high quality PSU with thicker cables shouldn't have issues with even with 200W (combined) going through. If you have been using this system for over a year and nothing has melted yet, you'll probably be fine.
@@peppa1492 I have a Corsair cx750m with an MSI RTX 2080TI and it's been set up like this for almost 2 years. Obviously, I don't know much about computers. Had a friend set this one up for me. I think I can change it to two cables. I've been just using it for editing very basic videos.
@@jayfalkus RTX 2080Ti usually used around 250W. It can draw up to 75W from the PCIe slot. That's approximately 25W over the rated spec, not a big deal. This setup is fine, although I wouldn't necessarily do any crazy overclocking with it.
@@peppa1492 Yeah I haven't overclocked at all. Watched a couple videos on that but just haven't tried yet. I looked up mu 2080 ti and it says 300W. I'm going to look at it tomorrow and see if I can just swap the cables. After watching a ton of videos on it first haha.
For me it is not the video editing performance that I bought my 3080TI for, but the gaming with high frame rates and pretty pictures. The video editing is a nice bonus though
![Why Your Creator PC Bottlenecks! 👉 How to find & FIX the problem? [Video, Photo & 3D]](http://i.ytimg.com/vi/s2O7P7Bmvg8/mqdefault.jpg)
![Why Your Creator PC Bottlenecks! 👉 How to find & FIX the problem? [Video, Photo & 3D]](/img/tr.png)
Which GPU to buy as a CREATOR? ➡➡ua-cam.com/video/FUcG_xGZt7k/v-deo.html
Hello bro, please what is your advice about Rog strix GTX 1070Ti A8g is good for creator ?? For your informations im from Morocco and graphic cards prices is very high.
I am also considering buying same card USED for 120$ which I think is bargain, despite being old card.
Video editors should just skip AMD GPUs and only go with Nvidia.
why.
@@michalddddddddd I don't have first hand knowledge but have heard this multiple times recently when researching gpu for photo/video editing. From what I was hearing is that if you have 2 comparable gpu gaming wise that the amd will preform worse in other scenarios in generall and that is been seen with multiple video editing software a significant difference in performance and that this is because amd has done alot of software optimization with gaming but just isn't on the same level for other things. Hope that helps mlaybe others can share personal input. I was dissapointed by this as I was leaning towards a rx580 or a more budget friendly rx 570 but ended up putchasing a used gtx 1070 for a steal the other day🙂 so not too bummed after all.
Wrong
@@immelting9834 why
That is a lie and that is personal preference. It’s like nvidia is to Mercedes Benz and AMD is like the Honda of today’s marketplace LOL. You just spew nonsense that is just a fanboy. Nothing to see here
Damn clocked me with the "before you double tap your right thumb"
😇🤣
Big thing to consider for 3D is, the rendering software you are using, which hardware utilization does it offer? Some offer good GPU utilization, some offer only CPU usage (for example Corona Render for C4D that I use), and some software can make use of a cpu+gpu combination. Also, can it use Cuda cores, RT cores, etc?
Basically figure out what your specific software(s) make best use of, and taylor your build to that.
well, u can't go wrong with a fast mid range cpu + standard ram + nVidia RTX, I guess only Hollywood renders on 64 core Threadrippers cause they can just afford that, or their render farms can.
@@Brukner841 yep pretty much. And honestly if people have one-time needs for massive performance, there are many render farms online you can pay to use per-hour etc if you're in a pinch for an animation or similar long-rendertime work.
Mistake 8. Never buy an amd gpu for content creation.. 😂
Not getting enough VRAM or to many fans is a good thing. LOL. What is wrong with three fans. More cooling at low fan speed LOL. It’s all personal preference and all modern GPU’s will do the work even edit on an RX570 8GB if you only use CapCut. But it’s rare for a true video creator to do this full time and pay 3k in bills every month from just working as a video editor. But most people are amateurs LOL
Someone just needs to make a list of gfx cards, which workloads they're suitable for, and how much to expect to *reasonably* pay without getting ripped off (too much heh)
Nice piece of advice !
I’d like to add the following, especially for 3D people out there doing GPU rendering :
Maybe Consider getting a blower-style rtx card instead of an open-air 3fan design or Founder Edition.
Yes blower are (much) harder to find.
Yes they run louder BUT :
-your whole system will have much better thermals since all the hot gpu air is going to be directly exhausted by the card whereas a FE or a 3fan will recycle most, if not all of it inside the case. I have a 3 fan MSI gaming X trio 3090 and I can assure you NO air at all is being exhausted through the rear IO, ALL the hot air is recycled in the case.
This does also mean that the “fresh” air cooling down your cpu is actually going to be the hot air from the gpu…. not always ideal…. manageable with a single gpu, but if you go multiple gpu it can become a problem.
-because they are 2 slots cards and not 3, if your power supply and your case can take it you could run 2 cards more easily or even 3 (I had 3 blowers in my previous build, 2x 2080ti 1x 3090 in a phanteks case upgraded with noctua fans, worked like a charm).
This means the “ultimate” 19k threadripper pro 3D rendering workstation could even have been…. “ultimate-er” with 3 video cards ;) ^^
Of course Your motherboard layout needs to allow it as well (I’m building a Z690 system with 3 gpus and it’s a nightmare).
Man, too few subscribers. Your video is seriously light years ahead of MANY videos out there on the subject. Thanks for sharing.
I got a screaming deal on a RTX 3080 like 75% off the regular price used and I found out why. It jus goes blank screen occasionally for a few seconds randomly. Now, for me I'm ok with it. I wish the guy would have been honest and told me the truth as he did not. But I just built this PC to do all my old home videos. I am not gaming with this PC. Even if i was, it does not happen often enough to be a huge problem but and I paid at such a deep discount I feel it was almost worth it. sometimes I can be using it for hours at a time and it never happens and it doesn't effect my home videos at all either. I am just saying, there is a higher price you pay when buying used and to some people this would be unacceptable.
You mentioned the media engines inside integrated graphics, good point.
I know this is for creators, but it's still funny.
Video editing is so niche, very few people actually do that.
If I were to edit videos often, I'd just use an iPhone or something with monster media capabilities. A 3090 is for massive 3d scenes with particles, volumetrics, path tracing, not for video editing lol.
video editing isnt just cutting things out, moving things around, its color grading, noise reduction, motion graphics, these can get pretty intensive especially in 4k and above. No serious person is using a phone for this.
@@gmcubed yeah but the 80 20 rule really applies to video editing, most of it can be done on a phone, but the super editing sure will need the best you can offer.
I honestly think the 3080 (at original MSRP) is like the best bang for buck if you are into 3d, video editing and other visual software, with some great gaming as a benefit. AMDs new offerings are nice, but they need to invent something similar to CUDA, cause the benefits for rendering and for other software like Adobe CC suite is just too much too overlook. And the 3080 definitely is a good buy even if the new generation is just on the horizon, should last you quite a while.
3090 for 700 bucks, oh Lawd I've been waitin!
I am a photographer and also love making videos. I have been thinking so many times about which GPU I'm going to buy. I love how you review on the 3050 dual but I was also thinking of my monitor's maximum refresh rate for certain games. So I keep searching for which GPU can also satisfy me for gaming with a 175hz 1440p monitor. I will be going with 3060 ti. 3070 and higher-end GPU are too expensive and impractical for video and photo works.
I'm looking to build a new machine for some 4k 10bit 422 video editing in premiere pro and possibly resolve. I'm also wanting to be able to run AE as smooth as I can add well as blender. Coming from an MSI GS65 stealth laptop with a GTX 1660Ti with 16gb ram and an i7 9750( I think). Should I wait for the new AMD CPU's and the new Nvidia RTX 40 series?
Loving the content you are making.
I'm not a professional creator (doing a bit of photography and gopro videography), I'm a 3D Cad guy working in shipbuilding. Since I'm doing that (around 25 years) I want to get all the stuff we create into a game engine to create some nice first person shooter like walkarounds. I've tried some stuff in Unreal Engine 5, it works, but my current desktop is totally outdated.
I was wondering if you have any recommendations for an Unreal Engine 5 desktop.
What's the best graphic card for creators and architect that's use 3D softwares, like, blender, unreal, vray, and others. 3080 with more Rops and Unit of Mapping textures and Units of shadding, or 4070, with a newer techonologies, like Dlss 3.0?
I am a pro sound engineer and I don’t need expensive equipment to get the job done right. Same as when I edit personal videos. Any RX570 will edit smooth. CapCut is fun. And I don’t need any other editor.
Planning to upgrade from nVidia Geforce GT730 4GB to Geforce RTX 3060 12GB or Radeon RX6650 XT for some 4K Editing in Davinci Resolve
editing with AMD is just fine. idk why yall hate on AMD so much, rendering times are good, video looks good, never corrupts we good here, maybe some of yall just need a better cpu
i have the pny 3060ti its about a year n while seeing reviews i have got positive reviews .
so i bought it working as my daily video editing streaming , office workloads etc.
except 4k rendering which takes time other is perfectly fine in this card .
i have ryzen 5 5600x when i bought it in new i got it on cheap price . so its a big deal
rtx 3060ti is a perfect for my daily workload ..
i thought of getting 3080 or 3070 but i think 3060ti is so suitable for my all days works .
here i m happy with what i bought in first place this is my 2nd gaming pc n first was laptop which was a crap can't game like my pc does it like a piece of cake just instant 😂
really this gaming pc is best choise i ever had in my life ...
total price : $1800
my country is nepal so its expensive here to get even a gpu but when i bought it .. it was normal price not like now its so much expensive.. around 1800 to 2000 $ per each gpu .. 😭😭
i got that gpu in $535.20 / Nepalese price : NPR. 68,000/_
How much time does it take to render video with that setup?
I have 5600x and thinking about rtx 3060ti
@@avgames7540 1080p video it takes around 10 to 15 min what ur running in ur background .. i have other backgrounds working so it takes 25min per 1 videos
@@avgames7540 and without anything on background it takes around 3 to 5 min of 24min long videos of 1080p to render only .
@@avgames7540 its is slow then 3700x coz cores does matter .. higher the core count faster it render my videos .. but ya its not like i usually do render only so its like with doing work 25 min at max to render 1 videos which length is only 24min per videos
Man.... this is like an improvised video, and you know it... do you really know about GPUs ? tell us the truth, you know ? some of us know a little and we know you didn't talked about VRAM (the very first priority), drivers, VRM quality, overclocking (obviously OC models are better prepared to long working sessions due to its better components), memory speed, fans noise, heat (cause SSD is next to the GPU pci-e port and it gets overheat and this is a common problem for video creators)... man i'm not exagerating, it's a cool video but kind of improvising common sense sounding comments to me...
I was literally just about to double tap my right thumb….
🤣I knew it!
wait you can use the igpu in a cpu along side a GPU now??? i'm like 30 and have been building all my life but this is news to me, I saw some mining rigs ( not my forte or something i'm interested in AT ALL ) that used mixed gpus having problems on forums but I don't help fix crypto problems.
It's the connector thats rated for 150W on Pcie not the cable, how much power the cable can carry depends on it's diameter. Decent PSU's will have cables capable of delivering 300W no problem. The real problem occurs when you get power supplies that are multi rail garbage and might, for e.g, claim to be 600W but have 4 150W rails. Thats when trying to pull, say 200W from a single rail causes a problem.
Get a single rail power supply that produces the full claimed power on its +12V rail, has a 5 year warranty or better, and is 80 plus bronze or better, and you wont go to far wrong.
For animation :The problem is slow core cpu's when simulating/FX or character animation. They don't use all the cores but those cores they use has to be very fast! But all that is mute when you need more then 12GB Vram due to your scene size then there is only one card to get especially for programs like Blender, 3090.
Not a single freelancer soul would make big scenes lol, for the average they dont need 3090 to be honest.
@@stormk-1130 I opened a mega scan file and then blender ... showed 8GB of vram before even loading anything. You are assuming no other programs are open ...
Anyone knows any difference between 8 G , 12G and 16 G video ram for creators.
i am a creator who was waiting for the prices to go down but as they went down, i am hearing that next generation gpus will hit the market. Should i wait for them or should i buy the gpu now because i dont want to upgrade my build for a vey long time.
And also, does faster m.2 translate to more video editing performance because i have a gen3 ssd.
If you dont want to upgrade for a long time than wait for the new upcoming cards. It is a bit of a gamble because you don't know if history will repeat itself but you should get more performance for your money if you wait. Theoretically.
Take Into consideration:
The newer cards will have a larger power draw when working. The manufacturer may not have drivers ready for the style of work you are creating because the cards are so new. Last gen cards price will drop accordingly to save you money which would be better utilized on ram cpu and faster hard drive.
All nice tips but the one withe the cable is just trash because the connectors are rated for 150w not the cable so it doesn't matter if u use one cable for 2 pcie connector
Well of course it does matter if you GPU connectors are pulling 300w but the cable and connector only up to 150w.
@@theTechNotice Nope the PCIE Conectors are made for 150w but not the cabel itselve those can be rated for much much more
I checked prices this morning. There is several good deals on AIO cooled cards. Up to 200 less than there air cooled equals. Keep up the great videos!
I would’ve got one but I already have a massive arctic freezer aio so a second one probably wouldn’t have been a good idea
Thanks for sharing
Which one I should buy between rtx 3060 ti and rx 6700xt
Plz help
Thanks a lot for the Info!!!... People say : " as a Creator you need an Nvidia"... Are AMD really bad for professional work?
Hi my friend,
Love your channel man. I always refer to your videos because I feel like other channels will do/say whatever to get views. But you focus on better content quality for viewers.
Thank you!
is the rtx 3060 Ti is good enough in video editing and Landscape rendering, cant figure it out which one of this gpu i gonna buy between rtx 3060 ti vs 3070 ti
I am nspired to become a video creator in iran.
I dont have access to good reviews or information here. Thats why this video is beyond life saver.
Unfortunately i have no information about subject you mentioned which others should already know.
But fortunately , you linked your other videos so i can watch them and learn.
All this valuable information is presented free . Thank you
Thanks for the information. Do you think overclocking the GPU will help decrease 3D rendering time?
Probably, but also increases instability, as a professional I wouldn't do it!
If I take 12400 with rtx 3060ti it will be smoothly in 4k and if not what's your advice for me
I love this series.. u just saved me from buying F version intel cpu.. i can't thank you enough for that.. please make full video on thing before buying or building pc
did i miss that - what was the advice?
@@darcybrown7369 its intel F Cpu.. Like 12600KF .. So if You by F Cpu There is no inside GPU in your processor.. So he was saying in one video that don't buy F version bcoz its not come with inbuild GPU
hope u understand
@@Cineinsaner cheers for that
Me skipping all the mistakes to find my mistake…
Hey hey new informations Thank you bro
One of my goals for 2024 is to learn digital audio and videography. My current plan is to edit on a 3900X and either a 2080Ti or a 2070 Super, all of them already on hand. I have faster CPUs, but I employ them elsewhere. I'm not planning on high volume but will be focusing on a trouble-free experience and quality results--at the expense of time. What I'm seeing as I explore GPUs and CPUs for running Resolve is that twelve Zen2 cores and either of those GPUs will be just fine. Anybody?
please stop that music
Great content. I'd like to add CUDA cores and Stream processors for consideration. Some use cases do work better with one or the other; at least from from my experience with 3D rendering.
3D rendering using which program? And could I get a bit more info on "CUDA" versus "Stream" (even if it's even a 'versus'?) please?
@@3nertia mainly blender, did a bit of Maya but not sure how well it works with either now. From my experience, Cuda cores just render faster on average at the same price point. Cuda cores are basically nvidia's while stream processors are AMD's. Both are proprietary "graphics processors". They use different techs and require different configurations; so you do have to check for those.
@@danielbertuy Ah! Thank you for the edification! That explains why most of the videos for building a video creation pc usually recommend NVIDIA!
I am glad I never got my 3060 from eBay now, I do not understand how people are still selling used 3090s nearly the same price as a brand new one next day delivery on Amazon, lol...
Amazon got some half tidy deals on GPU's at the moment, Think eBay needs to catch up a little, I am actually taken back on how much used GPU's actually go for on eBay, When Amazon is next day delivered and brand new, I bought a 1660 super on eBay, So eBay good for GPU's like the 1660 but as far as the 3090's they still too expensive for some reason I don't understand....
You are Just suggesting but not straight forward to focus on quality build....!!
Suggestions:
Include all components Sir to build the system. (Make video like this)
Hey Guys, I need some help here...
I'm in need of a graphics card, my 2060 super's VRAM is faulty, keeps on giving me both vram relatted bluescreens, and problems using After Effects.
I have a ryzen 9 3900x, and x570 Auros Elite, 64gb of ram and use it mostly for compositing, motion design, 2D animation, both frame by frame and after effects.
I'm starting to feel the weight of 2,5D compositions using 2k/4K assets.
I'm kinda divided betweem the 3080 10gb, 12gb or going 3070.
Does anybody have similar workflows that can give me an hint?
I just saw ur vids. AWESOME! Checked out some 3060 TI cards. There was single fan, double fan & triple fan. I know u said triple was not needed. Are the single fans adequate too? THANKS.
I have 3700x
32gb ram 3000mhz
240gb sata ssd , 2× hdd 2tb each
Asus prime b550 m a wifi
Rx570 4gb
Cooler master mwe 650wt psu
I want to upgrade my gpu to 3070, ti , 3080
Is my psu enough for these cards? And someone is selling inno 3d rtx 3070 twinnfan which is used for mining around 1year.... should i go for it or should i wait for new gen or should i purchase 30 series high end card?
Ryzen 5 5500 or 5600G ?
bros been growing like crazy nice videos bro very detailed
Appreciate that, great to see you in the comments!
Can I put i5 CPU and RTX 4080?or i 3 and 4080?for Blender and video editing
:| bro somehow get the a380 and make a review. :( u can do it bro but we can't also make a cyberpunk and blender benchmark on a380.
Nice video! What do you think about PNY NVIDIA T600 for non professional pc? it still gives good support for video editing? Thanks
Take that risk :) gamble is a verb on it's own. Great video thank you 😊
Great video!!!
Here’s an old school tip buy your cpu and gpu from micro center if u can they will always sell at msrp
❤️🇵🇭
nice viodeo!
A big mistake would be buying an AMD graphics card.
Thank you so much. You are the Best. Very well explained and so helpful
Hi Bro, This is one of the best presentations by Tech Notice. Well done, you are knowledgeable and an awesome person.
I got an msi 3080 gaming z trio for 37000₹ equalant to 450 usd in india. It is still under warranty for an other year and half. Did i get a good deal on this?
Best deal buddy
I think my life is complete now.
Since i've been following your channel, you kept reminding me of someone, but i couldn't tell who.
Then i saw Jackass Forever en then it hit me.
Are you related to Rob Dydrek?
LOL! And the Ukrainian President haha
Hi Bro, How bad is it if you're using the power cable that splits? :)
Not. But you have to know how many watts the cableslot in the psu delivers to the parts you want to power.
What’s an igpu?
month-late, but in case you haven't gotten an answer yet: igpu stands for Integrated Graphics Processing Unit and is a GPU that is built into your CPU (so any non-F Intel Core CPUs)
Please make video on 27 inc monitor.. 😍
This was good information, however I was looking and hoping for a specific piece. Is there one card or another that is better with one piece of software or another?
Case in point, Nvidia better with BlackMagic, or AMD better was Premier? Whatever the scenario, which card of these brands is better with which piece of software?
More in depth video coming on Thursday about the topic!
tnx for info, it was helpful bro
Can an RTX 3070ti gpu with 5900x cpu and 64GB RAM run DaVinci Fusion smoothly in 4k?
Depends on your workflow, but I'd like to say yes, very much so! Consider 12700k instead of the 5900x though ;)
@@theTechNotice Alright, thank you very much!
If I take 12400 with rtx 3060ti it will be smoothly in 4k and if not what's your advice for me
So good information.
Can i install Gtx3060 together wihh Gtx650? :-)
No, it wouldn't be worth the bugs
@ I see. Thank you
It’s all personal preference. Any modern GPU will do the work and most are amateur editors like me. And it’s rare for a video editor to make more than 3k a month to pay the bills. People today barely have 300-600 to spend freely LOL. I can do it al with my 730$ 7900x or just as well as an RX570 8GB. If you’re not a full time pro don’t spend more than 300$. It’s not worth it because you won’t ever see that return if you’re just an amateur. 98% we all are.
Гарні відео знімаєте 👍
How bad is it if you're using the power cable that splits?
A high quality PSU with thicker cables shouldn't have issues with even with 200W (combined) going through.
If you have been using this system for over a year and nothing has melted yet, you'll probably be fine.
@@peppa1492 I have a Corsair cx750m with an MSI RTX 2080TI and it's been set up like this for almost 2 years. Obviously, I don't know much about computers. Had a friend set this one up for me. I think I can change it to two cables. I've been just using it for editing very basic videos.
@@jayfalkus RTX 2080Ti usually used around 250W. It can draw up to 75W from the PCIe slot. That's approximately 25W over the rated spec, not a big deal.
This setup is fine, although I wouldn't necessarily do any crazy overclocking with it.
@@peppa1492 Yeah I haven't overclocked at all. Watched a couple videos on that but just haven't tried yet. I looked up mu 2080 ti and it says 300W. I'm going to look at it tomorrow and see if I can just swap the cables. After watching a ton of videos on it first haha.
For me it is not the video editing performance that I bought my 3080TI for, but the gaming with high frame rates and pretty pictures. The video editing is a nice bonus though