Alright, who’s ready to throw down with a lower control arm? 💪 Don’t worry, it’s not as bad as it sounds-just keep jacking up that sway bar, and no crowbars needed. 😏 And those rusty bolts? Yeah, they’re stubborn, but we’ve got this. Don’t forget to book that wheel alignment unless you want your tires looking funky. 😂 Drop your repair wins (or fails) in the comments-I need to know I’m not the only one yelling at car parts. 🚗✨ subscribe here ua-cam.com/channels/oh3C5oRb5WsM5ovai15uQA.html
You aren't alone, today I got annoyed at someone I don't know for what they did to mount a motor in a go kart(it was so bad I started to wonder if they didn't like their children) 🤣
How's she goin'? Wow, what a battle. When you weren't grunting you were groaning. Good on ya though Jason to stick with it and get 'er done. Nice work. Take 'er easy!!
Thank you for this great video. It looked like you struggled, with that much rust must been a brute. Lower control arm can be a bad job but you got it done
Good tip about leaving the sway bar link connected. Tough working out in the elements and on the ground. Ask me how I know. So, Bob is your uncle? I always heard that Robert was your father’s brother. Good one, Jason. Now go warm up. I liked the tool selection part.🎉
Oh no don’t kill your dog…😂……….we got the point with that analogy……good one…….one thing I’m learning here Jason is not to own a Nissan😂…..LOL……..got to love Newfoundland’s environment for working on cars……….I have worked on cars in other provinces and it is a different task and a breeze compared to the NL cars……….you made it look easy Jason………great job buddy…..
Got give it to you at your age still crawling around on the ground and working on cars... Me at 63 so glad I got a lift... I don't know what fittings your using for your air tools but long ago I switched to high flow T style couplers and fitting the feed hole is almost 3/8 from harbor freight it helps feed my tools and my northern tool Clutch G10K 1/2 impact not much stops it... Keep working and enjoying life 👍💪🇺🇸
Bear of a job on a gravel drive forsure. Saved yourself a lot of money diy. Your impact gun sounded real low on pressure , put a gauge on the end of the air line , it sounds like around 75 psi.
I did put a 1/2 inch hose and checked it it was at just over 90psi but i only got 20 gallon tank so only get sperts. I get about 6 seconds at about 95 psi and then slowly drops. But i got her done.
Alright, who’s ready to throw down with a lower control arm? 💪 Don’t worry, it’s not as bad as it sounds-just keep jacking up that sway bar, and no crowbars needed. 😏 And those rusty bolts? Yeah, they’re stubborn, but we’ve got this.
Don’t forget to book that wheel alignment unless you want your tires looking funky. 😂 Drop your repair wins (or fails) in the comments-I need to know I’m not the only one yelling at car parts. 🚗✨ subscribe here ua-cam.com/channels/oh3C5oRb5WsM5ovai15uQA.html
You aren't alone, today I got annoyed at someone I don't know for what they did to mount a motor in a go kart(it was so bad I started to wonder if they didn't like their children) 🤣
Jason great job explaining and showing how to replace the lower Control Arm. You have a nice collection of tools. Have a great day. Nick
Between you and Craig, you guys are helping a lot of people.
Great job. That looked like a struggle but you got it done
How's she goin'? Wow, what a battle. When you weren't grunting you were groaning. Good on ya though Jason to stick with it and get 'er done. Nice work. Take 'er easy!!
Excellent video on this topic, great job
Done a great job Jason, beer well deserved after that. 👍
Very well explained and really left nothing that wasnt aswered that i could tell
Glad you liked it, it was a brute but it is a simple job now i know what to do
Good job Jason. 👍🦾
Thank you for this great video. It looked like you struggled, with that much rust must been a brute. Lower control arm can be a bad job but you got it done
Good job Jason. I rarely record car repair videos because I get to cranky and swear a lot
Lol, if you watch some of mine, you will see it can be choppy, because i cut out the swearing lol
Well that was quite the pain in the ass. Great job Jason 🔧👍
Sure was
Good tip about leaving the sway bar link connected. Tough working out in the elements and on the ground. Ask me how I know. So, Bob is your uncle? I always heard that Robert was your father’s brother. Good one, Jason. Now go warm up. I liked the tool selection part.🎉
Oh no don’t kill your dog…😂……….we got the point with that analogy……good one…….one thing I’m learning here Jason is not to own a Nissan😂…..LOL……..got to love Newfoundland’s environment for working on cars……….I have worked on cars in other provinces and it is a different task and a breeze compared to the NL cars……….you made it look easy Jason………great job buddy…..
Thank you sir, yeah it can be a brute for sure somtimes there is more rust then metal
Got give it to you at your age still crawling around on the ground and working on cars... Me at 63 so glad I got a lift... I don't know what fittings your using for your air tools but long ago I switched to high flow T style couplers and fitting the feed hole is almost 3/8 from harbor freight it helps feed my tools and my northern tool Clutch G10K 1/2 impact not much stops it... Keep working and enjoying life 👍💪🇺🇸
Thanks brother, and i do need some high flow ones for sure
👍
Are those 2 upper bolts screwed into the frame, or do they have nuts on them?
They screw into the frame
Bear of a job on a gravel drive forsure. Saved yourself a lot of money diy. Your impact gun sounded real low on pressure , put a gauge on the end of the air line , it sounds like around 75 psi.
I did put a 1/2 inch hose and checked it it was at just over 90psi but i only got 20 gallon tank so only get sperts. I get about 6 seconds at about 95 psi and then slowly drops. But i got her done.
@DIYVariety I have to crank mine up to 140psi at the compressor to get 90psi at the gun , 50 ft hose.
At the 9:08 minute mark your hands look really pale. Time to go warm up.
Lol im a old wore out dog
@@DIYVariety RUFF RUFF RUFF🐕🦺🦮🐕
@EverydayProjects lol well after i used google translate for that, im now insulated how dare you lol
@@DIYVariety WOOFF WOOOOOOOF WOOF ERRRRRRRRR !!!!!