Це відео не доступне.
Перепрошуємо.
How to Replace Rear Shock 11-15 Chevy Cruze
Вставка
- Опубліковано 3 лют 2020
- Buy Now!
New Shock Absorber from 1AAuto.com 1aau.to/ia/1ASH...
New Shock Absorber Set from 1AAuto.com 1aau.to/ia/1ASS...
Shock absorbers help your vehicle stay stable and safe. Signs of worn out shocks are knocking or bumping noises, loose handling, or a bouncy or bumpy ride. The typical service life of a shock absorber is 50,000 miles, depending on conditions. TRQ shocks and struts are engineered to fit your vehicle perfectly. This video shows you how to install shock absorbers on your 2011-15 Chevy Cruze
• Check here for more videos on the 2008-16 Chevy Cruze: www.youtube.co...
This repair was done on a 2013 Chevrolet Cruze LS 1.8L and the process should be similar on the following vehicles:
2011 Chevrolet Cruze
2012 Chevrolet Cruze
2013 Chevrolet Cruze
2014 Chevrolet Cruze
2015 Chevrolet Cruze
Tools you will need:
• 15mm Socket 1aau.to/oyH/1AX...
• 17mm Socket 1aau.to/oyH/1AX...
• 18mm Socket
• 19mm Socket
• 21mm Socket
• Torque Angle Gauge
• Locking Pliers 1aau.to/obr/1AX...
• 1/2 Inch Impact Gun 1aau.to/ob8/1AX...
• Torque Wrench 1aau.to/opY/1AX...
• Rust Penetrant
• Floor Jack 1aau.to/ohT/1AX...
Subscribe: / @trq
Check out our playlist:
Chevy Cruze 2011-2015 1st Gen: • Chevy Cruze 2011-2015 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Quality, no nonsense, quick easy, and specs stated...Keep it up!!! 20 ⭐⭐⭐⭐⭐'s
Great Video Have a 2012 sonic same procedure. Love how you tell us about the torque specs. Everyone whom does these videos ALWAYS forgets to mention the torque part?Thanks for a great video and information Thanks
this video helped me a lot, Im a 1st year apprentice and my master tech was busy on another job, got the car done in about 45min for both rear lol
This is one of the best and fastest videos I seen
Thanks man for showing it with very easy method ❤
Should have torqued the lower bold when the car was on the ground in the resting position.
Thanks. You saved me a lot of headache.
Love your videos very very informative and right to the point Love how you add the torque specs Thanks so much for your help much appreciated
You definitely need and impact wrench, good luck undoing that bottom bolt with a regular hand wrench
+Glenn Shewin Thanks for the feedback! 1aau.to/m/Shop-TRQ
What would cause a thumping noise after replacing the shocks? Bad shock mount? Over torquing the nut on the shock?
Looks so easy
Hello. I also changed the real Shock at the rear and they started to chew the rubber inside. could you know what is the cause? something from the real Shock ?
Cell phones have tourque angle meter apps
Take the hubcap off and.......throw it LOL
+Joseph Irey Thanks for the feedback! 1aau.to/m/Shop-TRQ
Super .,..work...
75 foot lbs do not do sheers bolt
A whole lot easier to replace the upper shock mounts rather than fight trying to remove the old one.
Still need that dust boot
Where you get all the RUSTY cars?! 😂
2:53, woah woah, dude English please, wha what? 15 foot pounds!? Lmao, what’s that?
Okay, how do they foot pounds work, is there a mark on them ratchet wrench?
Eddie Jasson yes there is. It’s marked in increments.