The best video for tuning Carb is right here I didn’t have to adjust my carb since I watch this video the step are easy and simple and down right straight to the point instructions.. the best video about carbs that’s out. Dorby is the Man
Best video I've seen yet for adjusting the carburetor. The jet kit is so important to properly (and easily) get the engine to run smoooooooth............thank you!
Amigo nice channel new sub, i just revived my scooter 150cc gy6 with a new engine Xpro150cc from amazon. Sounds good but what gas Oct is better. I'm using 89 i heard you need to use 91 but i dont want to ruin the scooter
honestly is a 30mm the best for a crappy old 150cc? i looking to buy a oko and im getting different things from different places 26 28 30 im at sea level in wilmington nc
Thank you for taking the time to watch the video and your support. The baseline jets will be able to to start the engine. However fine tuning for each engine is required. Tune for the pilot idle jet initially. Then for the main jet after.
Needle clip is generally in the middle. Once you become more experienced in tuning you can super fine tune it with different needles and needle position. However its really not necessary to get over complicated.
im trying to get into a ruckus is it even legal to drive on the freeway im from va so you guys know how va state police be like with speeding or you know
Ièm autistic-not like I can arfford an Smax, but some say donèt put in a big bore because then you will need a bigger air intake, your bike will overheat and not last as long. I do wish to be at least able to ride secondary hwys in Quebec.
I think the guy that’s been doing this for 15+ years and is probably the biggest name in the ruckus tuning game knows more than you. Ive ram that pump on all my setups as well and it has been more reliable than anything else
The system is simple, reliable, and effective. There are not any reliable simple Electric fuel pump setups for this. We've tried a few and they often require too many extra electric parts to support the fuel pump that are clutter in my opinion and another item to replace. Sometimes they require fuel regulators that are also extra parts that can fail. However to each their own. Thanks for checking out the video and commenting. We appreciate your feedback.
@@MrDorby if I can get my wrap business off the ground I’ll absolutely be picking one up but that’s gonna take time, especially since I’m not in Florida/Cali
The best video for tuning Carb is right here I didn’t have to adjust my carb since I watch this video the step are easy and simple and down right straight to the point instructions.. the best video about carbs that’s out. Dorby is the Man
Thank you for your support! Glad this helps you!
Simple, tried and true. Results matter! Aaaaand even an appearance by one of the shop inspectors! 🐱
Thank you for taking the time to watch the video and your support. QC shop inspectors always around!
Best video I've seen yet for adjusting the carburetor. The jet kit is so important to properly (and easily) get the engine to run smoooooooth............thank you!
Appreciate your comment and glad you found value! Please share.
Dorby The Man. Keep the Good Work Coming. sharing is Caring.
Awesome video thank you looking forward to the rest of the series
Thank you for taking the time to watch the video and your support.
wish I knew about this channel years ago !
Welcome to the channel!
I AM SETTING MY ITALJET FORMULA 125/ TO THIS CARB WILL UPDATE FOR THE RESULTS THANK DORBY!!!
I love oko carbs have always been reliable for me as ive ran them on both 150cc and 232cc 4valve Liquid Cooled Swapped Honda Ruckus
What all was done to the ruckus shown going 75mph? Absolutely in awe.
Upgraded engine.
20:39 thanks for this
Nice job, you should do more how to video's. Keep it 💯
Dorby you R the Ying in my Yang....
Thank you for taking the time to watch the video and your support.
Great video brother
I wish you could take the incredible AK 550 and work some magic on it! Get rid of those scooter floor boards and put some cruiser foot pegs on it! 🙏
Thank you for taking the time to watch the video and your support. AK500 MAXI is a big scooter!
How much you charge build Rockus
Custom builds start at $15k complete. Design consultation required and built to order. 1 Year lead time currently.
Amigo nice channel new sub, i just revived my scooter 150cc gy6 with a new engine Xpro150cc from amazon. Sounds good but what gas Oct is better. I'm using 89 i heard you need to use 91 but i dont want to ruin the scooter
Generally carb engines do not require premium gas . It doesn't affect any gains or lost.
honestly is a 30mm the best for a crappy old 150cc? i looking to buy a oko and im getting different things from different places 26 28 30 im at sea level in wilmington nc
Interested in item for my 232 will I start off with the same jets 125/40 I’m at sea level in S.C
Thank you for taking the time to watch the video and your support. The baseline jets will be able to to start the engine. However fine tuning for each engine is required. Tune for the pilot idle jet initially. Then for the main jet after.
i’m SC also with a 28mm PWK carb.What jets helped you run good? mines still boggy full throttle with 120 main & 38 pilot
@@gullahgeechee2699 what size engine
@@dougparsley910 stock 150cc
@@gullahgeechee2699 try 118 /35 i bet it works better im in NC and thats what i use
do I need a fuel pump if my gas tank is gravity fed?
Mine wants to keep puking fuel out the overflow when idling.
How much does a set like that cost
Do you have another motor work done to run 30mm
Thanks for the FB post on this. Makes me think im way too lean at 35/110. I don't think i caught it...any needle changes or middle clip?
Needle clip is generally in the middle. Once you become more experienced in tuning you can super fine tune it with different needles and needle position. However its really not necessary to get over complicated.
That shit riding
My sym fiddle 3 150cc goes 122km/h on stock
Do you not have performance issues with the carb facing forward instead of rear like it’s “supposed” to be.
Mine always has issues like that
We do not have any performance issues whatsoever. Give our system and experience the performance and reliability yourself.
@@MrDorby OK this is going on a generic Chinese scooter that I have stripped the fairings off of. Does that make a difference?
im trying to get into a ruckus is it even legal to drive on the freeway im from va so you guys know how va state police be like with speeding or you know
Hey are you in Florida?
Yes we are in Florida.
Can i put 28mm carb on a 150cc
Does anyone have dimensions for a 150cc stretch mount. I am trying to fabricate my own custom mount but not sure on specs. Please help.
Will this carb set up work with an Ice Bear 150cc trike stock engine.
Yes this will work for gy6 150-232cc. The frame does not matter.
We’re is this shop located???
Where does the throttle go?
Does this apply to 125cc also
Got a 50 cc mddg wanna swap t0 150. Anyone no where. I can get. The motor. Wireing harness. I run 12 x8. Rear rim also. Motor mount.
Link and price I live in Florida heat
www.dorbyworks.com
Im running 38pilot 125 main might have to move up to a 130 main tho
Ièm autistic-not like I can arfford an Smax, but some say donèt put in a big bore because then you will need a bigger air intake, your bike will overheat and not last as long. I do wish to be at least able to ride secondary hwys in Quebec.
Can you add this to a stock 2024 ruckus ?
The Carb system is for an upgraded engine. A upgraded engine can be installed in a 2024 Ruckus.
How much n where to buy
About 3k total for engine swap it’s on their website
@@MRCALIEMS 3k ? Damn
Do not buy from rolling Wrench
remove that stupid vacuum pump man
I think the guy that’s been doing this for 15+ years and is probably the biggest name in the ruckus tuning game knows more than you.
Ive ram that pump on all my setups as well and it has been more reliable than anything else
The system is simple, reliable, and effective. There are not any reliable simple Electric fuel pump setups for this. We've tried a few and they often require too many extra electric parts to support the fuel pump that are clutter in my opinion and another item to replace. Sometimes they require fuel regulators that are also extra parts that can fail. However to each their own. Thanks for checking out the video and commenting. We appreciate your feedback.
@@MrDorby exactly. It’s nice seeing a response from the man himself. Love your custom builds and wish I could afford one 🥲
@@pulsartech2945 thank you for your support! We're here to help when your ready!
@@MrDorby if I can get my wrap business off the ground I’ll absolutely be picking one up but that’s gonna take time, especially since I’m not in Florida/Cali
I use nibbi 28mm