I'm binge watching your videos. I really like when you approach problems with quasi-perfect solutions. I mean, a lot of your contraptions would be unstable/insufficient/not perfect in a VERY long playtime, but (almost) nobody plays that long.
For the "overheating" of the water cleaning. Exchanging the tiles directly below it with normal tiles. You should be fine since they do exchange heat with the tiles they are staying on. Glassforge just a example if you remember. So exchaning them with something that distributes heat a bit better and your solution might be already there.
Hi Nathan, love your videos :) Would you ever consider doing a series with challenges, like showcasing how you start off on different kinds of planetoids?
Nice episode Nathan :) Not sure why you would want the Nat gas in the same room as the skimmer. They should be seperate with a liquid lock or another tube. Maybe you could use a hydro sensor to make sure you have plenty of PH2O to pump. Also, this contraption is power negative if the vent isn't pushing nat gas as well. You should have a similar automation like in your SPOM to check if the signals stays green for too long and make sure your nat gas room isn't over pressured either. Hard to balance.
Hey Nathan, you should put your break time BEFORE the sleep time, that way all the dupes can travel to the dining room, bathroom, or recreation room and then they’ll be closer to their beds, so you’ll only need 2 or maybe even only 1 sleep slots
The problem was that some of the recreational buildings take longer to use than the down time, which makes them miss their sleep. This way they will miss work instead.
These videos make my day Nathan. You're amazing at ONI and I love every video you do! I was wondering though where you are from because you accent is awesome. I hope that's not too personal a question if it is I apologize.
Hi, I'm new to the chanell, from few 50+ episodes of your current ONI series to be precise. I saw that crudeoilpoolroom of yours & instantly thought of using of some volcanos you got, to boil crude oil in to petrol :D Always you can turn that to power or to natural gas if you prefer. Nice videos by the way :P
Awesome system! The fertilizer synthesizer doesn't need to be operated by a dupe you might be able to automate everything in there with no dupe access.
Nice episode^^ How about extending the nature gas generators to the left side? That way you can consume the nature gas and with the extra polluted water you can fill up the reserves. With 1-2 tanks you can also store some nature gas as well. (susch natürlich wie immer tip top^^)
In the fertilizer room, expelling CO2 might be better to implement in the bottom layer. There's space for it above the battery, taking the CO2 below the neutronium, lessening the chances for CO2 to be repeatedly picked up by the pump. Once the pH2O backs up in the fertilizer production, the skimmer won't take away any more CO2, which will eventually overpressurize the room, and the geyser. pH2O overflow to the storage tank should be enough, or expand it to more than just one fertilizer syntheziser.
i guess the bedrooms are for aesthetics? I just do barracks with a one way exit through the atmo suit room. With an emergcy exit I keep locked. That way from the moment they up to sleep they in atmo suits. Slow dupes are restricted to the gym only exit to power a light in a very small room till they are useful. The oxygen system should be condenced down to an electrolyzer set up. I do like the polluted oxygen vent to ceramic factory I just watched. also your bathroom could use some remodeling. I should clear the maps like that be alot less travel then what my dupes doing now.
buildings become flooded when liquid is at a certain mass on their tile of interest. the amount varies based on the liquid, but is 35% of that liquid's max mass. knowing that, you can use a hydro sensor under the ladder and set it to turn the pump on when it detects liquid at anything below 350kg. in theory anyways (dirty water's max mass per tile without compression is 1000kg just like water) if one were curious enough, the max mass of all liquids can be found in the liquid.yaml text file in the install dir 😉
move gas pump to top left to solve C02 problem. move ladder to far right. water flows to the right and down. create deep pH20 pit below the new ladder. Some clean H2O above pH2O to prevent off gassing. Experimental but Liquid pump turns on when sensor detects H2O because H2O is pushed up when new pH20 arrives. or maybe when a gas sensor detects NOT CO2. pH20 must be in a pit because it is preventing a layer of CO2 for the carbon skimmer. a gas pipe bridge to prioritise natural gas to the internal natural gas generators. excess natural gas goes to external natural gas generators for power.
nathan sorry to interupt it again haha. yeah iam good ad it. no bad feelings. but is it not better to flooded the oilwel whit there own oil to hold them cool. because your water pipe input does not get over headed when it vent the gas of or does. ceremic tile just do the job. or els you get water in the oil. just a little warning mate. keep it up i know you can do. left me only one qeustion. did it wokr out know whit the three difrend liquids about the critter drop of couple video´s back or was that not the solution. stil just currios. greating alway see you next time. oh forgot to mension plastic is melting to so your transit tube beware about that to whit venting the oil well. ;P
You should have some storage for Cooking range, so it doesn't run out of gas when vent goes dormant. Also, i would go lower with settings on atmo sensor near vent since 2001g is already overpressure.
Great contraption. Your carbon skimmer might not work at full potential with having lost the two bottom spaces to water. I will try to incorporate it into my base now. Thanks Nathan.
i see you used a bottle emptier for your naphtha bloop. not necessary :) for future knowleges: you can craft a pedestal, then select the liquid you want to Display. the pedestal is limited to holding 1000g of a liquid, versus the 200kg the bottle emptier can output. just mount a 1kg bottle, remove it, then put out an order to Empty the bottle and a dupe will pour it on the floor in that spot
@@Nathans-Sandbox it's quite the game changer for setting up 3-liquid hop locks to prevent the 2 wetness debuffs in places where a dupe wont have a suit. just have to make sure you set the bottle to Empty with a high enough priority that nobody else picks it up for storage before it's poured on the floor
Hopefully you will see this comment but I've been wondering for a while and I can't see the answer anywhere. Why different gas for different type of task? Hydrogen for the power spine Bleach for the food So on and so forth... Thank you if you take the time to answer!
This automated beast is really coming alive, this is what Klei was intending when they made this! 😍
They sure succeeded in making me have fun;)
Just amazing I don't have the mind for this but I love watching and seeing your designs and ideas.
I'm binge watching your videos. I really like when you approach problems with quasi-perfect solutions. I mean, a lot of your contraptions would be unstable/insufficient/not perfect in a VERY long playtime, but (almost) nobody plays that long.
For the "overheating" of the water cleaning. Exchanging the tiles directly below it with normal tiles. You should be fine since they do exchange heat with the tiles they are staying on.
Glassforge just a example if you remember. So exchaning them with something that distributes heat a bit better and your solution might be already there.
Hi Nathan, love your videos :) Would you ever consider doing a series with challenges, like showcasing how you start off on different kinds of planetoids?
I would consider that, though challenges in the traditional way aren't really my forte.
@@Nathans-Sandbox Thanks!! I would love to see the solutions you come up with when you are limited in your starting biome resources :)
Nice episode Nathan :)
Not sure why you would want the Nat gas in the same room as the skimmer. They should be seperate with a liquid lock or another tube. Maybe you could use a hydro sensor to make sure you have plenty of PH2O to pump. Also, this contraption is power negative if the vent isn't pushing nat gas as well. You should have a similar automation like in your SPOM to check if the signals stays green for too long and make sure your nat gas room isn't over pressured either. Hard to balance.
Hey Nathan, you should put your break time BEFORE the sleep time, that way all the dupes can travel to the dining room, bathroom, or recreation room and then they’ll be closer to their beds, so you’ll only need 2 or maybe even only 1 sleep slots
The problem was that some of the recreational buildings take longer to use than the down time, which makes them miss their sleep. This way they will miss work instead.
I never would have known! I guess I don’t use any of the fancy recreation buildings
I only use them because my dupes don't have much to do anyways;)
These videos make my day Nathan. You're amazing at ONI and I love every video you do! I was wondering though where you are from because you accent is awesome. I hope that's not too personal a question if it is I apologize.
My favorite oni creator uploads again! legend!
Hi, I'm new to the chanell, from few 50+ episodes of your current ONI series to be precise. I saw that crudeoilpoolroom of yours & instantly thought of using of some volcanos you got, to boil crude oil in to petrol :D Always you can turn that to power or to natural gas if you prefer. Nice videos by the way :P
I found him when he made the 51 episode of this
A petroleum boiler is planned for the series;)
Nice work! I got into ONI because of you!
Awesome system! The fertilizer synthesizer doesn't need to be operated by a dupe you might be able to automate everything in there with no dupe access.
You could add a warning signal when your oxygen generation runs out of power
Nice episode^^
How about extending the nature gas generators to the left side? That way you can consume the nature gas and with the extra polluted water you can fill up the reserves. With 1-2 tanks you can also store some nature gas as well. (susch natürlich wie immer tip top^^)
In the fertilizer room, expelling CO2 might be better to implement in the bottom layer. There's space for it above the battery, taking the CO2 below the neutronium, lessening the chances for CO2 to be repeatedly picked up by the pump.
Once the pH2O backs up in the fertilizer production, the skimmer won't take away any more CO2, which will eventually overpressurize the room, and the geyser. pH2O overflow to the storage tank should be enough, or expand it to more than just one fertilizer syntheziser.
i guess the bedrooms are for aesthetics? I just do barracks with a one way exit through the atmo suit room. With an emergcy exit I keep locked. That way from the moment they up to sleep they in atmo suits. Slow dupes are restricted to the gym only exit to power a light in a very small room till they are useful. The oxygen system should be condenced down to an electrolyzer set up. I do like the polluted oxygen vent to ceramic factory I just watched. also your bathroom could use some remodeling. I should clear the maps like that be alot less travel then what my dupes doing now.
👍
buildings become flooded when liquid is at a certain mass on their tile of interest. the amount varies based on the liquid, but is 35% of that liquid's max mass. knowing that, you can use a hydro sensor under the ladder and set it to turn the pump on when it detects liquid at anything below 350kg. in theory anyways (dirty water's max mass per tile without compression is 1000kg just like water)
if one were curious enough, the max mass of all liquids can be found in the liquid.yaml text file in the install dir 😉
move gas pump to top left to solve C02 problem.
move ladder to far right. water flows to the right and down.
create deep pH20 pit below the new ladder.
Some clean H2O above pH2O to prevent off gassing.
Experimental but Liquid pump turns on when sensor detects H2O because H2O is pushed up when new pH20 arrives.
or maybe when a gas sensor detects NOT CO2.
pH20 must be in a pit because it is preventing a layer of CO2 for the carbon skimmer.
a gas pipe bridge to prioritise natural gas to the internal natural gas generators. excess natural gas goes to external natural gas generators for power.
nathan sorry to interupt it again haha. yeah iam good ad it. no bad feelings. but is it not better to flooded the oilwel whit there own oil to hold them cool. because your water pipe input does not get over headed when it vent the gas of or does. ceremic tile just do the job. or els you get water in the oil. just a little warning mate. keep it up i know you can do. left me only one qeustion. did it wokr out know whit the three difrend liquids about the critter drop of couple video´s back or was that not the solution. stil just currios. greating alway see you next time. oh forgot to mension plastic is melting to so your transit tube beware about that to whit venting the oil well. ;P
You should have some storage for Cooking range, so it doesn't run out of gas when vent goes dormant. Also, i would go lower with settings on atmo sensor near vent since 2001g is already overpressure.
You're right with the storage. I used a high gas pressure vent that goes up tp 20kg.
@@Nathans-Sandbox Sorry, wrong word used - I ment geyser, not vent.
The geyser overpressures at 5kg though.
Am I the only one that kinda wishes nathan streamed?
Great contraption. Your carbon skimmer might not work at full potential with having lost the two bottom spaces to water. I will try to incorporate it into my base now. Thanks Nathan.
You could add "No Manual Delivery" and "Deconstruct Only Buildings" mod
The fridge automation requires power to work. Otherwise it always sends a red signal.
👍
i see you used a bottle emptier for your naphtha bloop. not necessary :) for future knowleges: you can craft a pedestal, then select the liquid you want to Display. the pedestal is limited to holding 1000g of a liquid, versus the 200kg the bottle emptier can output. just mount a 1kg bottle, remove it, then put out an order to Empty the bottle and a dupe will pour it on the floor in that spot
Good tactic!
@@Nathans-Sandbox it's quite the game changer for setting up 3-liquid hop locks to prevent the 2 wetness debuffs in places where a dupe wont have a suit. just have to make sure you set the bottle to Empty with a high enough priority that nobody else picks it up for storage before it's poured on the floor
👍
won’t the transit tube that is made of plastic melt?
I hope not!
Where ist the wallpaper?
Omg u forgot the wall paper
Yes!
Hopefully you will see this comment but I've been wondering for a while and I can't see the answer anywhere. Why different gas for different type of task?
Hydrogen for the power spine
Bleach for the food
So on and so forth...
Thank you if you take the time to answer!
Hey there;) Bleach (Chlorine) kills germs and Hydrogen has good thermal capacity, it's one of the better gases when dealing with cooling.
@@Nathans-Sandbox Wonderful! So there is method to the madness that is ONI! Thank you for taking the time to answer me!
👍
what about wallpaper!!!!!!!!!!!!!!!!!!!!
comment
If you move the gas pump off the floor you shouldnt have much problem with the carbon dioxide anymore because it naturally falls below natgas