Would it be a good idea to install a rain screen before 1” ridged foam after all that install vynl siding ? Im thinking of doing that more for a wind brake.
Appreciate the videos, can u do some videos on installing window, doors, vinyl siding, etc? It's hard to find construction videos for us interior Alaskan. Is there any good resources in the interior for us DIY folks? Please help & thank u much
Asolutely. This technique of using furring across studs is really just suitable for retrofits: you're attempting to improve the performance of an existing building. If you're talking about a new build, double-stud construction is about the most cost-effective answer you'll find. Anyone can nail 2x4s together, you can plan on whatever total wall thickness you desire, plus you get the added benefit of tremendous sound dampening. By the way, the space between inner and outer walls is also insulated, so a twelve inch wall insulated with blow-in cellulose, for example, comes in at about R46. That was cutting edge when my wife and designed our home fifteen years ago; today I'd probably aim for sixteen inch walls.
@@paulmaxwell8851 It all depends on what a contractor is willing to do. This particular contractor preferred to build in this manner and it met the client's needs. Insisiting that a contractor build a wall he doesn't prefer or feels will take his crew longer can sometimes be problematic. At the same time, I don't disagree that the a double 2x4 wall at 12" will be a more energy efficient wall. With double stud walls however, the challenge for us becomes how to install the vapor retarder well with minimal penetrations. This can be a quality control issue. The advantage of the furred in wall is that the vapor retarder is installed and sealed conventionally and all wiring is run on the warm side of the wall to minimize penetrations. If you have a method of consistently getting a quality vapor retarder install on a double stud wall, please share it.
This is an excellent video and I appreciate the amount of time and attention to detail the builder spent on building and the explanation you provided. Would it be acceptable to use two layers of ROXUL insulation in the wall cavities, 1 1/2 Silver board between furring strips and plywood for the exterior? Also, can this wall technique be used to insulate the ceiling/attic? Thank you in advance.
The home @Ilya Beneschill be built in Newfoundland Canada. My goal is to construct a very energy efficient home that is cost effective, comfortable and not worry about mold growth. The foundation will most likely be ICF and above grade walls will be 2x8 construction @24 inch centers. First choice is ROCKWOOL COMFORTBATT with a thickness of 7.25 inches (R28). I have a few choices for the 1 1/2 rigid insulation, Enerfoil R6 per inch, AMVIC building system SilveRboard (R7.5) or Owens Corning products R5 per inch. Canada's building code requires a 6mm vapour barrier on the warm side of the home. I have a few choices for the exterior sheathing, plywood, OSB, and ZIP panels. Any good practices for the ceiling / attic would be greatly appreciated. Thanks -Shaun
I did something similar 20 years ago. I put 1/2” pink on the entire inside envelope of my 3 story 4500’ place. Over a 6 mil vb n under the sr. My only regret is that I didn’t do 2” I didn’t do any furring but thick foam may work out better. Only thing is the thermal bridge continues w/the furring. I totally support the ability for the elec boxes n the backing for towel bars etc. I mounted grab bars on my one piece tub to backing before tub install. If I build again I would go w/double 2x4 walls with all the goodies n those r-11 windows as that will be ur next issue because that area becomes the coldest thus condensation. N air tite of course with the air exchanger.
Great video. At 12:25 you say you don't want to add more than 1/3 of the insulation in front of the vapor barrier, but you also said you are doubling the insulation with the foam board. Wouldn't that be half?
I think that was referring to the studs specifically, which are about R-1 per inch (so about R-8 for those 8-inch studs), whereas the stud bays have about an R-24. That said, this is an interesting point because it does highlight that there are vertical cold bands along the studs where there might still be some condensation. My guess is that it would be limited enough that it's unlikely to cause problems.
Guess that air exchangers are needed in all new air tight construction and for indoor humidity control. Here is Louisiana with a ranch house just seal the best you can and let the missed spots cover the air exchange part. Worst bill 2k foot home is about 100 a month in January. Curious what the monthly heating bill for an average well insulated home in Fairbanks is?
My 1080 sq. ft. super-insulated home in central British Columbia has only a small wood cookstove for heat, plus some solar gain through triple-glazed windows. We burn 1 1/2 cords of pine/spruce/aspen in a year. That's an entire year! My neighbours burn 8-10 cords of firewood a year and they are starting to feel too old to keep doing this much longer. Insulation is not sexy. But it's the best money you'll ever spend!
Common convention says to insulate from the out side, however you have mitigated the vapor transfer into the stud cavity but I do worry about moisture getting behind the drywall and condensing on the vapor barrier. Is the foam board EPS or XPS ?Great videos and website by the way, I reference the CCHRC to colleagues. clients and for info purposes often. Keep it up . Thank you
Just a guess but the vapor barrier at that location, offset from outside by R30, should not be that cold and if the indoor humidity is kept reasonable, that surface should not get anywhere near any dewpoint.
@@canonicaltom A vapor barrier has nothing to do with indoor humidiry levels, it helps keep absorptive materials from getting wet which nullifies the insulation value.
@@johnford5568 The dew point is proportional to RH. If the wall cavity is kept above the dew point, condensation won't happen in there, making a vapor barrier unnecessary. It is still important to have a vapor retarder and a tight air barrier of course.
Good detail information and great advice to take in consideration many of the things for each ones needs ., but once you drywall, then you are limited to where you can nail and screw into. I suggest looking into areas like kitchens or where changes may come in for unlimited areas to nail or screw into., is to use 1/2 plywood after the fur strips. Just check make sure it will not bring moisture behind the ply or and behind the drywall since I have not used this method. There are many factors to consider from where you live, where and how many windows, doors are on a wall location. Your heating and cooling systems, floor levels apply, and last your exteriors insulated vapor barrier system correctly done or exteror is not insulated below, above, and behind the brick. Open to suggests to moisture proof from mold and dry rot. Ret. Lic. Contractor.
Using U-wert or similar, having OSB outside of insulation in cold climate, you are likely to get moisture problems. In cold climate it should be good practice to have impermable materials inside and permable on outside.
What is the usual life of these wooden houses. We have average winter temperature of minus 15-20 degree celcius. But as we are not aware of wooden houses our forefathers used to build clay houses but these days everyone is building concrete houses but those are fuel guzzlers and also the bathroom and toilet fails in winters
What are you talking about a 8:45? Для чего это отверстие, кто понял, переведите пожалуйста и для чего деревянная доска поперёк в подоконной зоне дальше на видео?
Never thought of "standard" and 2x6 wall going together... I've always thought 2x4 was more "standard". Good video, really good insulating details. Thanks :)
How I landed on this channel idk, but really interesting videos. Keep up the good work.
Looks like the insulation practices are pretty similar to what we do in Norway. Great video 👍🏼
goo work and thanks alot for the informations
Would it be a good idea to install a rain screen before 1” ridged foam after all that install vynl siding ? Im thinking of doing that more for a wind brake.
Appreciate the videos, can u do some videos on installing window, doors, vinyl siding, etc? It's hard to find construction videos for us interior Alaskan. Is there any good resources in the interior for us DIY folks? Please help & thank u much
Wouldn't a double 2x4 wall with space between for a total wall of 12 inches with R19 in both cavities be cheaper and more efficient?
Asolutely. This technique of using furring across studs is really just suitable for retrofits: you're attempting to improve the performance of an existing building. If you're talking about a new build, double-stud construction is about the most cost-effective answer you'll find. Anyone can nail 2x4s together, you can plan on whatever total wall thickness you desire, plus you get the added benefit of tremendous sound dampening. By the way, the space between inner and outer walls is also insulated, so a twelve inch wall insulated with blow-in cellulose, for example, comes in at about R46. That was cutting edge when my wife and designed our home fifteen years ago; today I'd probably aim for sixteen inch walls.
@@paulmaxwell8851thanks for your insight
@@paulmaxwell8851 It all depends on what a contractor is willing to do. This particular contractor preferred to build in this manner and it met the client's needs. Insisiting that a contractor build a wall he doesn't prefer or feels will take his crew longer can sometimes be problematic. At the same time, I don't disagree that the a double 2x4 wall at 12" will be a more energy efficient wall. With double stud walls however, the challenge for us becomes how to install the vapor retarder well with minimal penetrations. This can be a quality control issue. The advantage of the furred in wall is that the vapor retarder is installed and sealed conventionally and all wiring is run on the warm side of the wall to minimize penetrations. If you have a method of consistently getting a quality vapor retarder install on a double stud wall, please share it.
this is a fantastic detail. Considering doing the same regardless of climate, mainly to achieve airtightness / decrease penetrations.
This is an excellent video and I appreciate the amount of time and attention to detail the builder spent on building and the explanation you provided. Would it be acceptable to use two layers of ROXUL insulation in the wall cavities, 1 1/2 Silver board between furring strips and plywood for the exterior? Also, can this wall technique be used to insulate the ceiling/attic? Thank you in advance.
The home @Ilya Beneschill be built in Newfoundland Canada. My goal is to construct a very energy efficient home that is cost effective, comfortable and not worry about mold growth. The foundation will most likely be ICF and above grade walls will be 2x8 construction @24 inch centers. First choice is ROCKWOOL COMFORTBATT with a thickness of 7.25 inches (R28). I have a few choices for the 1 1/2 rigid insulation, Enerfoil R6 per inch, AMVIC building system SilveRboard (R7.5) or Owens Corning products R5 per inch. Canada's building code requires a 6mm vapour barrier on the warm side of the home. I have a few choices for the exterior sheathing, plywood, OSB, and ZIP panels. Any good practices for the ceiling / attic would be greatly appreciated. Thanks -Shaun
I would use SEGA or Zip system tape on miter corners after you take steps to reduce sharp edges to help protect 6mm plastic vapor barrier.
Moving to nh and the content you provide is great.... Thank you so much... You're videos are a huge help
gilford laconia
I did something similar 20 years ago. I put 1/2” pink on the entire inside envelope of my 3 story 4500’ place. Over a 6 mil vb n under the sr. My only regret is that I didn’t do 2” I didn’t do any furring but thick foam may work out better. Only thing is the thermal bridge continues w/the furring. I totally support the ability for the elec boxes n the backing for towel bars etc. I mounted grab bars on my one piece tub to backing before tub install. If I build again I would go w/double 2x4 walls with all the goodies n those r-11 windows as that will be ur next issue because that area becomes the coldest thus condensation. N air tite of course with the air exchanger.
Great video. At 12:25 you say you don't want to add more than 1/3 of the insulation in front of the vapor barrier, but you also said you are doubling the insulation with the foam board. Wouldn't that be half?
I think that was referring to the studs specifically, which are about R-1 per inch (so about R-8 for those 8-inch studs), whereas the stud bays have about an R-24. That said, this is an interesting point because it does highlight that there are vertical cold bands along the studs where there might still be some condensation. My guess is that it would be limited enough that it's unlikely to cause problems.
Guess that air exchangers are needed in all new air tight construction and for indoor humidity control. Here is Louisiana with a ranch house just seal the best you can and let the missed spots cover the air exchange part. Worst bill 2k foot home is about 100 a month in January. Curious what the monthly heating bill for an average well insulated home in Fairbanks is?
My 1080 sq. ft. super-insulated home in central British Columbia has only a small wood cookstove for heat, plus some solar gain through triple-glazed windows. We burn 1 1/2 cords of pine/spruce/aspen in a year. That's an entire year! My neighbours burn 8-10 cords of firewood a year and they are starting to feel too old to keep doing this much longer.
Insulation is not sexy. But it's the best money you'll ever spend!
Common convention says to insulate from the out side, however you have mitigated the vapor transfer into the stud cavity but I do worry about moisture getting behind the drywall and condensing on the vapor barrier. Is the foam board EPS or XPS ?Great videos and website by the way, I reference the CCHRC to colleagues. clients and for info purposes often. Keep it up . Thank you
Just a guess but the vapor barrier at that location, offset from outside by R30, should not be that cold and if the indoor humidity is kept reasonable, that surface should not get anywhere near any dewpoint.
@@johnford5568 If the indoor humidity is kept reasonable, the vapor barrier isn't necessary.
@@canonicaltom A vapor barrier has nothing to do with indoor humidiry levels, it helps keep absorptive materials from getting wet which nullifies the insulation value.
@@johnford5568 The dew point is proportional to RH. If the wall cavity is kept above the dew point, condensation won't happen in there, making a vapor barrier unnecessary. It is still important to have a vapor retarder and a tight air barrier of course.
Great insights!
Good detail information and great advice to take in consideration many of the things for each ones needs ., but once you drywall, then you are limited to where you can nail and screw into. I suggest looking into areas like kitchens or where changes may come in for unlimited areas to nail or screw into., is to use 1/2 plywood after the fur strips. Just check make sure it will not bring moisture behind the ply or and behind the drywall since I have not used this method. There are many factors to consider from where you live, where and how many windows, doors are on a wall location. Your heating and cooling systems, floor levels apply, and last your exteriors insulated vapor barrier system correctly done or exteror is not insulated below, above, and behind the brick. Open to suggests to moisture proof from mold and dry rot. Ret. Lic. Contractor.
Using U-wert or similar, having OSB outside of insulation in cold climate, you are likely to get moisture problems. In cold climate it should be good practice to have impermable materials inside and permable on outside.
What is the usual life of these wooden houses.
We have average winter temperature of minus 15-20 degree celcius.
But as we are not aware of wooden houses our forefathers used to build clay houses but these days everyone is building concrete houses but those are fuel guzzlers and also the bathroom and toilet fails in winters
What are you talking about a 8:45?
Для чего это отверстие, кто понял, переведите пожалуйста и для чего деревянная доска поперёк в подоконной зоне дальше на видео?
Can this be used in the south?
I believe in the south, warmer climate you would have vapor barrier on the exterior side.
Thank you for the information
Nice video
Kingspan has this insulated plasterboard products, i think you may be interested.
Who is the local contractor
Never thought of "standard" and 2x6 wall going together... I've always thought 2x4 was more "standard". Good video, really good insulating details. Thanks :)
I would rather build with mass such as adobe in alaska.
Chalk line for furring? Is this 1970? Laser levels are cheap 😂
Plastic electric boxs .
hahaha y u didnt record videos during making this home and now u came and explaining in this way. practically was better
No
These walls cannot even stop projectiles coming outta pellet gun, they are a joke.