My first set was all messed up. One made my door very hard to close. The magnet guides were all wrong, one wouldn’t light at all. One would change colors when I shut the door and wouldn’t stay on what o wanted. They did nothing to resolve the issue except to get another battery. Unfortunately they are the only ones that look good so I had to rebuy and now I’m waiting 3 weeks cuz of Chinese new year…
I ordered these without the batteries, getting the CR2430s from the Amazon link on the product page. Those worked great for the front door units, but I don't see any way that they'd fit for the ones for the back doors. Since the battery covers also mention CR2032 and I had some of those (4 conveniently enough) laying around, I tried those out. They fit perfectly, and seem to be working fine. I've reported this to Hansshow as well.
Mine sills got scratch from the car 2 weeks later. Now my door paint is messed up and people are telling me the door underneath could rust. I can’t recommend these.
In my opinion, the battery replacement sucks when it needs to be replaced. I feel like they can design the battery cover on top of the plate, maybe sitting far on the edge of the plate with chrome finish. This makes battery change easier. Because of that, I am not keen on getting this .
The batteries works for at least three years so I wouldn't worry, chances are they are so scratched and ugly that you just need one more excuse to replace them with something more fancy by that time, and that is where battery replacement comes in handy.
I respectfuly disagree. I like the clean lines and any battery placement would make them look cheap in my opinion. My kids step on this and I am sure that would brake off. I took two of them off to see how hard it would be and with a little heat gun action they came off no problem.
So, I'm understanding this... these literally go OVER the OEM sill plates? No need to use a heat gun to peel off the factory ones? Aside from being a little less expensive, that saves me a hassle. And, you can replace the batteries after a couple years? I may return the $250 pair from Tesla since I haven't installed yet.
Changing the batteries wouldn't necessarily involve unsticking anything. The tape is actually on small plastic pieces that are attached to the main plates via sockets. Of course its certainly possible that when trying to detach them that the tape will give way before the socket releases.
I noticed in your video that your door panel pockets light up… how did you do that, is that custom? I have a June 2020 LRM3, but mine do not light up…🤔
Got the black ones lit about 2 weeks ago. For some reason it took them a month to get them to me but, they are awesome and easy to apply. My neighbor got them too after seeing mine. i put a comment on your hanssho yoke video when ordering. Can you let me know what that " middle airbag cover" option means before I order. TIA
Great stuff my friend! I had mine installed for a month now and they have been working really well. Btw did you get the 10.10 beta yet? I have been stuck on 10.8.1 since the holiday update.
Are they better/worse/same than the ones available on Tesla's own website? (which involve removing the existing sill signs).... but functionally work the same way. I would imagine the Tesla ones would be more robust longer term.
Thay may be more robust but I definitly didn't want to remove my OEM ones. I like that these go over top and can be removed and back to factory quickly myself. I have never had my hands on the Tesla ones.
I don't want my Tesla to stand out and be eyed by criminals. I just want mine to blend in with the pack. Besides, all those mods won't be covered by insurance should someone hit and total my car.
Buy a set here:
👉 www.hautopart.com/product/model-3-y-led-illuminated-welcome-pedal-door-sill-protector/
👉 10% Discount: "cftesla"
I watched others install this and not one mentioned taking the paper off the tiny magnet -- but YOU did. Simple. Thanks!
First time seeing ur video on the door sill installation. 2/23
My first set was all messed up. One made my door very hard to close. The magnet guides were all wrong, one wouldn’t light at all. One would change colors when I shut the door and wouldn’t stay on what o wanted. They did nothing to resolve the issue except to get another battery. Unfortunately they are the only ones that look good so I had to rebuy and now I’m waiting 3 weeks cuz of Chinese new year…
I ordered these without the batteries, getting the CR2430s from the Amazon link on the product page. Those worked great for the front door units, but I don't see any way that they'd fit for the ones for the back doors. Since the battery covers also mention CR2032 and I had some of those (4 conveniently enough) laying around, I tried those out. They fit perfectly, and seem to be working fine. I've reported this to Hansshow as well.
I got these along with the once sold by Tesla. And I must say these once are much easier than the oem with light
Mine sills got scratch from the car 2 weeks later. Now my door paint is messed up and people are telling me the door underneath could rust. I can’t recommend these.
In my opinion, the battery replacement sucks when it needs to be replaced.
I feel like they can design the battery cover on top of the plate, maybe sitting far on the edge of the plate with chrome finish. This makes battery change easier.
Because of that, I am not keen on getting this .
The batteries works for at least three years so I wouldn't worry, chances are they are so scratched and ugly that you just need one more excuse to replace them with something more fancy by that time, and that is where battery replacement comes in handy.
I respectfuly disagree. I like the clean lines and any battery placement would make them look cheap in my opinion. My kids step on this and I am sure that would brake off. I took two of them off to see how hard it would be and with a little heat gun action they came off no problem.
Bought them, thanks 4 the code $26.00 Yeah !
the ring doesn't stick to the door as in this video, I tried several times
So, I'm understanding this... these literally go OVER the OEM sill plates? No need to use a heat gun to peel off the factory ones? Aside from being a little less expensive, that saves me a hassle. And, you can replace the batteries after a couple years? I may return the $250 pair from Tesla since I haven't installed yet.
Any luck with activating your Illuminated Model 3 add on discount code? They look great, and I plan to purchase a kit. Thanks!
yes its good now
Really dislike the idea of having to unstick this product to change the batteries
Once every 3 years? Not too bad in my books.
Changing the batteries wouldn't necessarily involve unsticking anything. The tape is actually on small plastic pieces that are attached to the main plates via sockets. Of course its certainly possible that when trying to detach them that the tape will give way before the socket releases.
I will take a second look
I noticed in your video that your door panel pockets light up… how did you do that, is that custom? I have a June 2020 LRM3, but mine do not light up…🤔
10:00pm PT - Discount Code is working!
Thanks for the update. I want these.
Just now it didn't seem to be working as advertised. It gave me a 25% discount, rather than 10%. :)
@@AaronSchrab bruh thanks for looking out. That's sick. Got it.
This was awesome! I’m certainly getting these for my Model Y
Yea they are really cool!
Those look very nice.
Got the black ones lit about 2 weeks ago. For some reason it took them a month to get them to me but, they are awesome and easy to apply. My neighbor got them too after seeing mine. i put a comment on your hanssho yoke video when ordering. Can you let me know what that " middle airbag cover" option means before I order. TIA
Thanks for the video. Your code doesn't seem to be working unfortunately
One sec i will fix it
I am working with Hansshow to fix it. Check pinned comment above to know when its ready.
Its working now
Great stuff my friend! I had mine installed for a month now and they have been working really well. Btw did you get the 10.10 beta yet? I have been stuck on 10.8.1 since the holiday update.
Thanks no still on 10.9
Are they better/worse/same than the ones available on Tesla's own website? (which involve removing the existing sill signs).... but functionally work the same way. I would imagine the Tesla ones would be more robust longer term.
Thay may be more robust but I definitly didn't want to remove my OEM ones. I like that these go over top and can be removed and back to factory quickly myself. I have never had my hands on the Tesla ones.
Looks great! Though I was hoping they would cost half of what they retail for.
Yea Tesla accessories are usually pricy. At least the good ones
They kinda do. This kit brings 4 vs Teslas 2
Hey, your discount code doesn’t seem to work.
ill fix it one sec
I am working with Hansshow to fix it. Check pinned comment above to know when its ready.
working now
Your discount code didn't work
It will I am working with them to fix it. Check pinned comment for update when its ready
its working now. Thanks for your patience
i got one
Did you already put them on?
I don't want my Tesla to stand out and be eyed by criminals. I just want mine to blend in with the pack. Besides, all those mods won't be covered by insurance should someone hit and total my car.
Lol $250. AliExpress has the exact same for $50. This video is a scam
What a rip off