Lamar Dump Trailer Hydraulic Trouble Shooting
Вставка
- Опубліковано 22 сер 2024
- Is your trailer not lifting or lowering properly?
The first step is to check your remote, follow along to trouble shoot.
If the remote isn't the issue, check our other videos on trouble shooting your pump.
• Replacing The Solenoid...
This was the exact problem with my trailer! I was already looking into a new pump setup when I found your video!!! Thanks man!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Glad I could help!
Your video helped me after my trailer hoist was stuck in the up position. Had to leave my trailer in front of a customers house! I figured since there was power coming from the controller that it was fine. Thanks again.
Glad it helped!
God bless, you've yet done another good deed for someone.
Thank you!
Appreciate the vid. Love your dump trailer. Keep the vids coming
Thanks Josh! What other trouble shooting videos would you like to see?
@@LamarTrailers how do you check the charge level on the battery charger
@@ralphplummer2633 there is a button on the charger that will show battery level
@@LamarTrailers mines doesn't have a button its a slayer industries 5amp charger
@@ralphplummer2633 We use the brightway chargers now, we've moved away from the slayer. They should have indicators lights that let you know what the charge status is at.
I have a hydraulic jack installed from factory. Now i found the hitch level in tje morning much lower that i left the night before.
So the trailer is going down only way to stop that is moving the bypass valve from jack to dump .
Thanks
Does the jack have any fluid leaking? If so the seal may be leaking. Contact warranty@lamartrailers.com, they can walk you through troubleshooting better than I can over UA-cam comments.
Awesome video! Keep up the good stuff.
Thanks!
Gotta be more careful with it comes to accidentally dropping the controller then. Thanks!
Luckily it's an easy fix!
Suggestions on the best place to buy a replacement controller?
Good shit😊
I have a new dump trailer and it always lifted up equally and closed and lowered equally now now the right side goes up 1st and the right side hits 1st when lowering do you know what that could be
Do you have a dual cylinder?
@@LamarTrailers
It is single cylinder
I just put a pump in my trailer does it matter which line goes where for the ram
oh yeah, the top port on the pump goes to the bottom of the cylinder
What if it wont go up? Same procedure?
Just got a brand new trailer and the up and down feature work great and dump bed is going all the way up and down but once it hits the peak height or lowest level point when returning to home position it makes that squealing sound yours made in the beginning of the video if I hold the button for it to go more than it's max... Is that a normal sound if everything works great?
That is normal for it to make that sound, as it is stressing the pump because the cylinder is at its peak points for extension and retraction.
Thank you!!!
What if you get resistance and the bed comes down, but super slow and the pump squealing
KTI has a trouble shooting guide you can look through.
cdn.premium-supply.com/KTI_Docs/DC-Power-Unit-Troubleshooting.pdf
What is the flow rate gpm and psi on the pumps?
3200 PSI and 2 Gallons/minute