@1:30, to release pressure, undo the power cable to the motor, so only the solenoids operate to release pressure - - - - a most valuable piece of information I could not find anywhere. Such a simple and necessary function so I could release my quick connects. Thanks.
My trailer has not been able to lift for about the last three months, I didn’t want to have to spend a Ton of money having a repair shop fix it, after seeing your video I went and tried the screwdriver on top of the solenoids the down solenoid was working but the up solenoid was not, I tooked the down solenoid and placeed it on the up Valve and pushed the down button and then the lift went up, you solved my problem!!now I just need to order a new part thank you so much for your video
This is a great video. I just had to empty a bunch of brush BY HAND ! I was all RIP ROARIN’ excited to dump, I had fresh charge on the bettery. Got there and it was going up to dunk at 1st, then for some dumb reason I let off the switch.
You probably dont give a damn but does someone know of a method to log back into an Instagram account?? I somehow forgot the login password. I would love any tips you can offer me.
@Zaid Dakota Thanks so much for your reply. I found the site on google and I'm in the hacking process atm. I see it takes a while so I will get back to you later with my results.
Hello i recently purchase one like this one but no manual came with it , can you please let me know o make a video on how this pump should be install thanks in advance
Hi, my dump trailer is power up and power down, i am afraid as it gets older I will be at a site where I wont be able to get the dump back down because of electrical failure. it seems from what you have explained, in an emergency, i could take off the down solenoid and then loosen the valve enough to get the dump body to lower?
You probably should not, as the pressure should be factory set for best use. I was having a sudden lift failure, and thought a sudden decrease in lift capacity was the pressure relief valve, but actually it is a failed o-ring on the lift valve.
@1:30, to release pressure, undo the power cable to the motor, so only the solenoids operate to release pressure - - - - a most valuable piece of information I could not find anywhere. Such a simple and necessary function so I could release my quick connects. Thanks.
My trailer has not been able to lift for about the last three months, I didn’t want to have to spend a Ton of money having a repair shop fix it, after seeing your video I went and tried the screwdriver on top of the solenoids the down solenoid was working but the up solenoid was not, I tooked the down solenoid and placeed it on the up Valve and pushed the down button and then the lift went up, you solved my problem!!now I just need to order a new part thank you so much for your video
Thanks for an excellent explanation!
This is what UA-cam is great for. Quick answers to real problems. Got my pump back working. Was stuck valve after sitting a while.
Thank you!
Great video. Hope this’ll save me a bunch of money. Might just replace the two valve solenoids and the and the main solenoid
Mulțumesc pentru video
Thanks for this video
This is a great video.
I just had to empty a bunch of brush BY HAND !
I was all RIP ROARIN’ excited to dump, I had fresh charge on the bettery.
Got there and it was going up to dunk at 1st, then for some dumb reason I let off the switch.
You probably dont give a damn but does someone know of a method to log back into an Instagram account??
I somehow forgot the login password. I would love any tips you can offer me.
@Callum Edward instablaster ;)
@Zaid Dakota Thanks so much for your reply. I found the site on google and I'm in the hacking process atm.
I see it takes a while so I will get back to you later with my results.
@Zaid Dakota It did the trick and I now got access to my account again. Im so happy:D
Thank you so much, you saved my account :D
@Callum Edward Happy to help =)
Great job sir your like 👍 and a new subscriber thank you so much
Great video thanks
Thanks. It was stuck in between and making a screeching noise. pulled both magnets off and on and it reset.
Thank you
Hello i recently purchase one like this one but no manual came with it , can you please let me know o make a video on how this pump should be install thanks in advance
Thank you for the vidio, you saved my ass....
Hi, my dump trailer is power up and power down, i am afraid as it gets older I will be at a site where I wont be able to get the dump back down because of electrical failure. it seems from what you have explained, in an emergency, i could take off the down solenoid and then loosen the valve enough to get the dump body to lower?
How many tons can It lift ?
Why my coil sounds like is on the hall time and won't lift up or do anything
my trailer slams down im not sure how to adjust the pressure
How do you connect the panel?
Is tacky a real term among electromagnet enthusiasts?
I simply held a strong magnet on top of the solenoid and then pressed the button. Trailer came down at a normal pace.
Hola
Buenas noches
Sir how do you adjust the pressure ?
You probably should not, as the pressure should be factory set for best use. I was having a sudden lift failure, and thought a sudden decrease in lift capacity was the pressure relief valve, but actually it is a failed o-ring on the lift valve.
I follow all your precedure, still not working. I hear click when push up or down. any idea which part may fail?
Same here, just clicks when I go up or down?
Hoang Ca did you figure it out
Hoang Ca what did you find on the hydraulic what was the click
You sound Amish