This is my review on the first mini bike i’ve ever owned! It’s the most fun i’ve had for the price in a while! Purchased at tractor supply fully assembled
I'm 350lbs and this bike has no problem hauling me around lol. I even had my son ride with me,he's 120lbs,that's 470lbs combined and still no problem. I would recomend this bike to anyone! I removed the governer on mine,also replaced the exhaust for a straight pipe (sounds awesome) and a bigger carb. Bike is much louder,faster and more fun!
Nice I’m modded mine with new straight pipe exhaust and I’m 215 and 2 weeks later my motor blew up! There just a hole in the motor. Before that problem my bike was broken for 4 months and I had to wait for a part. Because when I was riding my oil plug came out and my bike started to drain oil. There was another problem before that. Because I was riding one day and master link on the chain snapped! So my bike gave me a hard time but it’s fine because I’m getting a go kart. Not to mention this is my 2nd one the first one was a Mega Max 212cc. I’m sorry to tell all this info it’s fine if you don’t care. I’m just surprised it can haul you and your son.
@@spongebobsquarepants11 i bought 2 of these bikes,my kids ride the crap out of them,so far no problems. Me and my buddy who is the same size as me,we took the bikes for a ride on the off road trail,they did really good. On the steep hill,we had to get some speed to get to the top 😁. Sorry you had bad experience with yours.
@@R32LMedition yea my bike started to act different after I got my bike fixed. But It doesn’t matter because I’m getting a go kart anyways. But I’m happy you’re having fun on your bikes.
This is my first motorcycle ever. Not really into bikes but got this because I wanted something to ride around in the desert. This thing exceeded my expectations. Lots of machine for $600
If you remove/bypass the governor, make sure you also do the proper engine mods to make sure you're doing so safely. Connecting rod, push rods, valve springs, and rockers all need to be upgraded to safely remove the governor.
@@SLEV7NELEV11N it also isn't a bad idea to replace the flywheel with a billet flywheel, especially if you're going to be going over 8000rpm, just because the stock cast one could potentially explode
@@kraigynblemle613 did you not read the guys comment lol you definitely want to replace parts with stronger ones higher rpms higher stress on the parts that aren’t supposed to be stressed that much sure you don’t need to replace them but to be safe for yourself and so you don’t wreck anything on the bike itself you definitely should replace certain parts
I been riding mini bikes for years and all types of motorcycles. I'm 60 and bought two colemans 200s me and my grandson have been all up in mountains through steep and rocky trails and after 3 years no maintenance at all. They hurt to ride because there is no shocks but there fun as hell and easy to upgrade.
Bought a non running one for 190 on Facebook marketplace. Swapped it with a predator 212, removed the governor, got a billet flywheel, got a vm22 caeb, and got an ARC billet rod. Went 50 with a straight chain
Nice bikes. Be sure to research the maintenance these bikes need. As an example, the chains will stretch the first few rides and need adjusted. Enjoy your mini bikes and ride safe.
Thank you! Yes first 10 hours do a oil change and then after that it’s every 90. I did notice my chain was pretty tight and snug when i first bought it and i’ve had to adjust it a bit as it did stretch. I’m also going to go through the fasteners and double check them to be tight. Again thank you for the comment!
I found one brand new at local store that was sold "As Is" for $200. It needed new spark plug wire ($15) and was missing gas cap ($5). I added oil & gas and it started up on third pull. Runs great. I was going to give it to grandson but his mom is totally against it. Darn shame, it's a really cool mini bike.
I've had mine for about 6 months. I Bought it thru Walmart and assembled it myself, the title says Tractor supply on it so I assume that's where Walmart gets them. The bearing on the jack shaft went out after about 4 hours of riding. The seal came off and grease came out. I replaced the clutch and jack shaft with a torque converter from Go Power Sports. Now it's about 3 times faster. about (35mph) with out any other mods. I have a Harley Sportster "48" and a 1949 Cushman scooter so I ride the Coleman just to go to the mail box here where we live. Also the lid on the fake gas tank vibrates and makes lots of noise. I have a bungee cord on it now but will probably glue it shut since I don't use it. I bought some road tires for it but the original off road tires are still holding up well on hard surfaces. All I can say is if you get one, be prepared to work on it a bit. Luckily I have a motorcycle lift table and don't have to bend down or kneel to tinker with it. I ordered a set of American made Timken bearings and replaced those on he Jack shaft though I'll probably never use them. It will go to the new owner if I ever sell it.
@@chillmusic5952 its actually powerful as hell, im about to take the governor off of it though just because it tops out at around 20mph, and it actually can handle a LOT of weight, my and my friend were messing around and decided to both get on it and it still MOVES
I got mine 2 yrs ago, paid 750 at Tractor supply, added the rear rack and bought a rear rim and put it on the front so i could have brakes on both front and rear., i ride it every weekend,
Awesome man. Just got the exact same bike yesterday. Mine also came about half full of oil. I drained it and filled it up with fresh oil. Rode it for about 2 hours today. Love it so much! It’s a great mini bike! Powerful little motor with 6.5 hp.👍😀
Thanks for the review... do you think these are cheaper buying in store? I'm finding they are $800-900 each, or maybe they have just gone up over the past year or so. I would love to get these for the $600-700 price tag. Thanks
TS is selling them for 699 right now. Got a nused on marketplace for $475 yesterday. Hadn't even had a full tank through it. Littel girl was scared of it.
Nice bike bro I got the ct200u and it hits 26mph I just took the Throddle screw out and I also got a upgraded air filter and pipe and upgraded carb and the bike sounds better and louder
New flywheel if you do mods and turn more RPM . THE stock flywheel will explode and ruin your whole day and you probably be one legged the rest of your life. No joke!
Nice thanks for the review I work at Camping World in Cheyenne Wyoming. We don’t have that color all we have are red . I heard they make a ton of aftermarket parts .
In November 2019 I purchased 2 mini bikes C T200-EXR for $898.00 and the protection plan $159.00 for 3 years. It came from Sams Club unassembled. I am 220 lbs. and top speed on both were 23 and 24 mph. (phone ap). I am pretty new to riding and my only complaint is when I twist to full throttle I have to hang on or it will dump me on my butt. lol
@@slizardthelizard1988 LMAO!!! Yes, stock is 19 mph. That's IS woefully pathetic!! Simply cutting off the throttle-limiting screw (which they now tack-weld in place) will get you to 24-25. That upper-range might require cutting a couple coils off of the throttle-return spring. Going a little further by removing that throttle-cable-co-centric return spring and replacing it with one straight to the carb will get you a little more. If you REALLY want a boost, then replace that jack-shaft setup with a Torque-A-Verter (essentially, a CVT transmission) and a Stage 1 upgrade (better air intake & exhaust). I've gotten my CT200U-EX up to 43 on level ground. Next step, without modifying any engine internals at this point, is to swap out the 50 tooth rear sprocket with a 44 tooth I found and see just how close to 50 mph I can get!
@@fubisroc9673 how did you get yours to go that fast? so far i cut the welded screw and it does go faster. i’m going to order a intake and exhaust valve springs and 44 tooth sprocket. do you think i can get to 40 with this?
@@pushhrodd01 Probably not 40. MAYBE ~30-33. Get yourself a TAV30. Either cut the frame piece that only holds the chain-guard to make it fit with standard risers, or get a riser plate from OMBWarehouse that moves the engine up AND forward.
I am about 4 hours in on this new bike and the unit does not want to start and when it did I could see discolration on the valve color (hot?) What type of gasoline is everyone using. I may drain the gasoline and start there. I also hear a lot of knocking.
oh oh. Well first make sure you have oil in it to the full amount! But if the valve color is getting hot and you hear knock it might be detonation and piston slap from using low octane fuel. these require premium gas
Stage 1 kit + zip tie/limiter screw removal + carburetor pulls my 280lb butt with ease on my friends bike up hill I think that the weight limit is more of a recommendation the engine with right gearing will have no problem pulling any person the frame can be an issue though I've seen people snap welds on frames, you have to be doing some crazy sh××× but taking it on dirt roads small trails farms what it's designed to do a 300lb person will have little to no issues riding
@@pushhrodd01 under the gas tank there is a long wire with a coil in the middle zip tie the coil most of the way shut leave a little play. And for the screw when you pull the throttle there is an arm that smacks a screw its normally crappily welded and will break free but you can cut or bend the tab that comes in contact with the screw that limits full throttle ID look up coleman ct200u ex free mods there's plenty of videos out there showing how to do it
@@pushhrodd01 Mine was (sadly) welded pretty well. Removing the air intake (then covering the intake to the motor, obviously) provides easy access to cut off the screw with a Dremel or other cut-off tool. Just be wary of anyone suggesting removing the governor components. Doing so (without billet rods, cams, and flywheels) turns the stock Chinese flywheel, located just below your nuts, into a possible small grenade. Take your OWN risks there!!
@@Kane-yg8gb Seriously? If you own a wrench, then fix it. If you DON'T own a wrench, then you shouldn't own a mini-bike in the first place. What are you ACTUALLY complaining about here??
No, dot requires turn signals, head lights, mirrors and a horn, you can get 50cc road legal scooters for around the same price, but this one isn't road legal.
I'm 350lbs and this bike has no problem hauling me around lol. I even had my son ride with me,he's 120lbs,that's 470lbs combined and still no problem. I would recomend this bike to anyone! I removed the governer on mine,also replaced the exhaust for a straight pipe (sounds awesome) and a bigger carb. Bike is much louder,faster and more fun!
i’m going to start modding mine soon! did those mods increase the power a lot? i want the exhaust for the pops
Nice I’m modded mine with new straight pipe exhaust and I’m 215 and 2 weeks later my motor blew up! There just a hole in the motor. Before that problem my bike was broken for 4 months and I had to wait for a part. Because when I was riding my oil plug came out and my bike started to drain oil. There was another problem before that. Because I was riding one day and master link on the chain snapped! So my bike gave me a hard time but it’s fine because I’m getting a go kart. Not to mention this is my 2nd one the first one was a Mega Max 212cc. I’m sorry to tell all this info it’s fine if you don’t care. I’m just surprised it can haul you and your son.
@@pushhrodd01 i wouldn't say alot alot,but enough to where you can tell the difference. The straight pipe is awesome,it pops like crazy 🤣.
@@spongebobsquarepants11 i bought 2 of these bikes,my kids ride the crap out of them,so far no problems. Me and my buddy who is the same size as me,we took the bikes for a ride on the off road trail,they did really good. On the steep hill,we had to get some speed to get to the top 😁. Sorry you had bad experience with yours.
@@R32LMedition yea my bike started to act different after I got my bike fixed. But It doesn’t matter because I’m getting a go kart anyways. But I’m happy you’re having fun on your bikes.
This is my first motorcycle ever. Not really into bikes but got this because I wanted something to ride around in the desert. This thing exceeded my expectations. Lots of machine for $600
where did you buy it from i found it for 799 where did you find it for 600?
@@flender8577 Camping world. My channel has a review on the $600 one from that place
Haha, I just got it, also to ride in the desert 😎👍
@@unknowdah.beastboi7787 Nice man I have a review of it on my channel. I use mine to ride in the middle of nowhere. Desert and street driving
@@JohnDrivesAnything Nice, I didn’t even know I could ride the Mini on the road till today, they even give you a temporary tag at the store hehe
If you remove/bypass the governor, make sure you also do the proper engine mods to make sure you're doing so safely. Connecting rod, push rods, valve springs, and rockers all need to be upgraded to safely remove the governor.
Yep
Thanks for this comment. I wouldn't have known. (Never owned a bike)
@@SLEV7NELEV11N it also isn't a bad idea to replace the flywheel with a billet flywheel, especially if you're going to be going over 8000rpm, just because the stock cast one could potentially explode
You can remove the screw it doesnt do anything accept just raising top end speed the governor still keeps max rpms down
@@kraigynblemle613 did you not read the guys comment lol you definitely want to replace parts with stronger ones higher rpms higher stress on the parts that aren’t supposed to be stressed that much sure you don’t need to replace them but to be safe for yourself and so you don’t wreck anything on the bike itself you definitely should replace certain parts
Where I am the bike costs $900 so apparently the price has gone up.
I been riding mini bikes for years and all types of motorcycles. I'm 60 and bought two colemans 200s me and my grandson have been all up in mountains through steep and rocky trails and after 3 years no maintenance at all. They hurt to ride because there is no shocks but there fun as hell and easy to upgrade.
Bought a non running one for 190 on Facebook marketplace. Swapped it with a predator 212, removed the governor, got a billet flywheel, got a vm22 caeb, and got an ARC billet rod. Went 50 with a straight chain
Nice bikes. Be sure to research the maintenance these bikes need. As an example, the chains will stretch the first few rides and need adjusted. Enjoy your mini bikes and ride safe.
Thank you! Yes first 10 hours do a oil change and then after that it’s every 90. I did notice my chain was pretty tight and snug when i first bought it and i’ve had to adjust it a bit as it did stretch. I’m also going to go through the fasteners and double check them to be tight. Again thank you for the comment!
I found one brand new at local store that was sold "As Is" for $200.
It needed new spark plug wire ($15) and was missing gas cap ($5). I added oil & gas and it started up on third pull. Runs great. I was going to give it to grandson but his mom is totally against it. Darn shame, it's a really cool mini bike.
Aww man means u gotta keep it for yourself😂😂
What store?
I'll buy it
Tractor Supply
This is perfect for me, I’m a 24yo small guy that weighs 125.
I've had mine for about 6 months. I Bought it thru Walmart and assembled it myself, the title says Tractor supply on it so I assume that's where Walmart gets them. The bearing on the jack shaft went out after about 4 hours of riding. The seal came off and grease came out. I replaced the clutch and jack shaft with a torque converter from Go Power Sports. Now it's about 3 times faster. about (35mph) with out any other mods. I have a Harley Sportster "48" and a 1949 Cushman scooter so I ride the Coleman just to go to the mail box here where we live. Also the lid on the fake gas tank vibrates and makes lots of noise. I have a bungee cord on it now but will probably glue it shut since I don't use it. I bought some road tires for it but the original off road tires are still holding up well on hard surfaces. All I can say is if you get one, be prepared to work on it a bit. Luckily I have a motorcycle lift table and don't have to bend down or kneel to tinker with it. I ordered a set of American made Timken bearings and replaced those on he Jack shaft though I'll probably never use them. It will go to the new owner if I ever sell it.
wow that’s crazy!! i’ve had absolutely 0 problems out of mine
Thanks for breaking this down 💪 saw one yesterday and wondered if there was a review video. Helped alot
The weight a lie i got two of them and it haul me around like nothing and I'm 280
Do you have to switch gears on these mini bikes or are they automatic?
I’m picking one up tomorrow also I like your 86 in the background
lol im getting one tomorrow too, what u think of it?
@@michaelaguilar2836 how is it?
@@chillmusic5952 its actually powerful as hell, im about to take the governor off of it though just because it tops out at around 20mph, and it actually can handle a LOT of weight, my and my friend were messing around and decided to both get on it and it still MOVES
it’s a AE92 actually but they look very similar
I got mine 2 yrs ago, paid 750 at Tractor supply, added the rear rack and bought a rear rim and put it on the front so i could have brakes on both front and rear., i ride it every weekend,
Awesome man. Just got the exact same bike yesterday. Mine also came about half full of oil. I drained it and filled it up with fresh oil. Rode it for about 2 hours today. Love it so much! It’s a great mini bike! Powerful little motor with 6.5 hp.👍😀
awesome!! yes they’re great for the money!
There is a spring under the gas tank if you tie it off it will go a good 35 even with the throttle screw out it makes it 10 times more fun
Smart, sometimes it's best just to leave things alone from the factory.
On the other hand, the exhaust does suck.
And the airbox.
Maybe a new eplug
Don’t need to go fast to have fun. Enjoy your ride
I’m 13 and I just got that bike I’m here to see how to fully use it and the torque level and stuff thanks new sub
if you do adjustments to the gas it will go 40mph
With a Amazon performance kit and removed governor it will probably hit that easily but idk
off topic, is that an AE86 in the background?! How are the bikes holding up?
Thanks for the review... do you think these are cheaper buying in store? I'm finding they are $800-900 each, or maybe they have just gone up over the past year or so. I would love to get these for the $600-700 price tag. Thanks
I just purchased one put together at tractor supply for 699
TS is selling them for 699 right now. Got a nused on marketplace for $475 yesterday. Hadn't even had a full tank through it. Littel girl was scared of it.
I got one off of facebook marketplace for $400. Was only rode a few times. I never recommend buying vehicles like these brand new, way too expensive.
Very cool I want one ! Thanks for posting
Nice bike bro I got the ct200u and it hits 26mph I just took the Throddle screw out and I also got a upgraded air filter and pipe and upgraded carb and the bike sounds better and louder
you got the links for that bro ?
Just bought one from a guy for 250 but it needs carb work
You can buy replacement carbs for next to nothing.
Do they sink in water? I plan to use it for ice fishing
New flywheel if you do mods and turn more RPM . THE stock flywheel will explode and ruin your whole day and you probably be one legged the rest of your life. No joke!
This Minibike is the bomb! I can have a little fun for little money.
Looks like a blast! One question, how is the headlight powered? Is there a small battery or is it from the spinning rotor?
Just from the motor so it dims when you let off the throttle.
@@A.E.Lanman777 ahh interesting, thanks
I have it right but is it supposed to smell like gas a lot
Remove the governor and youll love it...
Could you do an update video, sense it's been 6 months now
yes i’ll do an update video here soon!! i’ll try and get one tomorrow
What’s max speed on this ?!
690 deal that’s steel
Where'd you buy this model? I can't find it anywhere online and not sure what stores would sell it.
Nice thanks for the review I work at Camping World in Cheyenne Wyoming. We don’t have that color all we have are red . I heard they make a ton of aftermarket parts .
I bet your gf would fly on it
Only complaint 5 times lol
These are perfect for kids imo mainly because of the low speed limit, however it does look like a fun mini bike to ride in the mud and wet conditions.
In November 2019 I purchased 2 mini bikes C T200-EXR for $898.00 and the protection plan $159.00 for 3 years. It came from Sams Club unassembled. I am 220 lbs. and top speed on both were 23 and 24 mph. (phone ap). I am pretty new to riding and my only complaint is when I twist to full throttle I have to hang on or it will dump me on my butt. lol
i got one for christmas i am 11 years old and it is so fun to ride highly reccomend
absolutely man! congratulations and merry christmas!
My kids gokart came with a lil bit of oil too. Not much but it wasn't empty.
when you start the unit, do you have to have the choke on every time?
i believe so otherwise it won’t start. that’s what the manual says. when it turns on move it back
Yes and no depending on the climate and if you rode it that day already. If it is already warmed up, it will start without the choke.
They are only allowed on the dirt right they aren’t allowed to be driven on the streets of LA?
Diggin the bike, might need to pick one up. Wanna sell that AE92? XD
Mine came with a funnel
haha, he says "my ONLY complaint" about 4 times.
3 complaints later…. The only complaint 😂😂
Remember to wear some protective gear. You're not at the beach ; )
Thinking about getting one for my 10 yr old brother
I need one to "walk" my 9 month old Springer.
The is awesome I. Like the minibike it is Bad i’m looking
Price
Goes 30 yards with it and comes back. Is that the top speed or something?
did I ever say it was? it was a quick review. stock is 19mph top speed. A 5 sec google search says that
@@pushhrodd01 Did I say you did? Or did I ask? Google search to learn how to read.
@@slizardthelizard1988 LMAO!!! Yes, stock is 19 mph. That's IS woefully pathetic!! Simply cutting off the throttle-limiting screw (which they now tack-weld in place) will get you to 24-25. That upper-range might require cutting a couple coils off of the throttle-return spring. Going a little further by removing that throttle-cable-co-centric return spring and replacing it with one straight to the carb will get you a little more. If you REALLY want a boost, then replace that jack-shaft setup with a Torque-A-Verter (essentially, a CVT transmission) and a Stage 1 upgrade (better air intake & exhaust). I've gotten my CT200U-EX up to 43 on level ground. Next step, without modifying any engine internals at this point, is to swap out the 50 tooth rear sprocket with a 44 tooth I found and see just how close to 50 mph I can get!
@@fubisroc9673 how did you get yours to go that fast? so far i cut the welded screw and it does go faster. i’m going to order a intake and exhaust valve springs and 44 tooth sprocket. do you think i can get to 40 with this?
@@pushhrodd01 Probably not 40. MAYBE ~30-33. Get yourself a TAV30. Either cut the frame piece that only holds the chain-guard to make it fit with standard risers, or get a riser plate from OMBWarehouse that moves the engine up AND forward.
can this be on main roads?
Great Review am Thinking about buy one too
I am about 4 hours in on this new bike and the unit does not want to start and when it did I could see discolration on the valve color (hot?) What type of gasoline is everyone using. I may drain the gasoline and start there. I also hear a lot of knocking.
oh oh. Well first make sure you have oil in it to the full amount! But if the valve color is getting hot and you hear knock it might be detonation and piston slap from using low octane fuel. these require premium gas
Stage 1 kit + zip tie/limiter screw removal + carburetor pulls my 280lb butt with ease on my friends bike up hill I think that the weight limit is more of a recommendation the engine with right gearing will have no problem pulling any person the frame can be an issue though I've seen people snap welds on frames, you have to be doing some crazy sh××× but taking it on dirt roads small trails farms what it's designed to do a 300lb person will have little to no issues riding
Oh yes definitely next pay check i will get the stage 1 kit because it is kinda slow. how do you do the zip tie screw removal?
@@pushhrodd01 under the gas tank there is a long wire with a coil in the middle zip tie the coil most of the way shut leave a little play. And for the screw when you pull the throttle there is an arm that smacks a screw its normally crappily welded and will break free but you can cut or bend the tab that comes in contact with the screw that limits full throttle ID look up coleman ct200u ex free mods there's plenty of videos out there showing how to do it
@@Jb_outdooradventures wait is the screw welded on? i’ve tried backing it out before with no avail :(
@@pushhrodd01 not always if so it's so crap it will break free with little effort
@@pushhrodd01 Mine was (sadly) welded pretty well. Removing the air intake (then covering the intake to the motor, obviously) provides easy access to cut off the screw with a Dremel or other cut-off tool. Just be wary of anyone suggesting removing the governor components. Doing so (without billet rods, cams, and flywheels) turns the stock Chinese flywheel, located just below your nuts, into a possible small grenade. Take your OWN risks there!!
what’s the original price?
Can you please get a Massimo utv?
I wish they took the front compartment and turned it into a real gas tank and just added a back one or rack for stability
that would be awesome!
Mine makes a bad rattle sound cause it’s loose
@@Kane-yg8gb Seriously? If you own a wrench, then fix it. If you DON'T own a wrench, then you shouldn't own a mini-bike in the first place. What are you ACTUALLY complaining about here??
@@fubisroc9673 right😂😂 my niece could fix his problem and she 5
@@fubisroc9673 Amen my friend!😆👍
How tall are you so I can compare it to myself I'm about 200lbs myself but I'm not a short guy I'm probably 5'10
i’m 5’7.
Neigbors would probably love you if you put a muffler on that thing
It has one. It just sucks. Sounds exactly like a lawnmower.
What size or part number did you replace the light with?
Anybody put a bigger engine on one yet?!
Who else saw that lizard at 224
Just got one for Christmas today and rode it for nearly 10 hours sheshhhhhh
hahah yeah i rode it for that long when i first got it it was very fun!! merry christmas!
Do not get them they are a money pit
336 area all day 👏🏻😂
225 eh lmao
Where did u get it at
Put a 212cc predator engine on it an you'll move alot faster
for sure! my friend did that to his.
Thanks for sharing 🍸
OMG! That looks like so much fun!
Cool.....
I’m glad I got this color wave other than the tan camo
for sure! this one is slick
Spending up those Biden Bucks
heck nah. never got any lol
Would these be road legal?
No, dot requires turn signals, head lights, mirrors and a horn, you can get 50cc road legal scooters for around the same price, but this one isn't road legal.
Great review bud
thank you so much!
Thanks bro this helped a lot
my pleasure! more videos to come
Thanks!
no problem!
Hey I’m 6 foot and 240 is still a good bike for me
oh yeah definitely! Especially if you mod it to go faster
Trump 2024 lLet’s go trump
You need a motorcycle license to drive this in the streets in California?
It’s trash i have 3 and they all stopped working it’s garbage
Stop playing with kids toys!
stay mad
Do you need a motorcycle license to ride these
Nope
nope
so 1 yr later, do you still have these?
Hit 26mph out of the box. Takes hills like a champ .I also run Coleman camp fuel in mine .
how did you hit 26mph out the box? They max out at 19mph stock unless you backed out the throttle screw
When I got mines went 24 out the box