I'm confused about how to load the profile into X-Plane. It creates a joystick configuration file under the AFC bridge not the main joystick configuration page. Do I have to load this configuration in within x-plane or just activate it here, for the lights to work. They don't seem to be doing so
Thanks for the videos. I have received both the HC yoke and quadrant but have as yet been unable to install them on X-plane 11.53. When I started with the yoke ... the control wheel worked but after connecting the quadrant I can get nothing to work. No support at Honeycomb.
Re: Setup.exe - At 2:50, no matter how I change the string of characters to pick up D:/X-Plane 11, the default, etc NOTHING WORKS! I have windows 10. Cannot move forward until this is resolved.
Great video. One question about default profile on X-Plane. The Alt button is lit on my Bravo as soon as I enter plane. I press other buttons and they don't light up. Is that normal?
Can't get this to install. Says that "the X-Plane 11 Folder not found at that location" even though used the browse to point to the folder where the sim is installed?
Copying the files from the Mac installation did work, however. BTW There _is_ a Default profile, but it is not selected, and it only contains the LED definitions, no buttons or knobs, so the Autopilot stuff is not (yet) working.
the profile "default _throttle" saved and activated successfully. Please reload the profile via the upper menu in your Flight sim. Reload the profile????
I have Xplane11 with Window 10. I can't get it installed. He says that "the X-Plane 11 folder was not found in that location" even though he used the browser to point to the folder where the sim is installed? what can I do? thanks
Downloaded without too many snags, but could use some detail on how to use the tool. Not really much of an expert in fiddling around, but can follow instructions (Windows/Xplane 11 scenario).
I have been truying for some time to configure the autopilot select buttons. You have a video that explains this for P3D, but not for x plane - why can you not do this for X Plane? it would be very simple and help a lot of people! More generally, the “documentation” is far too brief and sketchy. How can you publish software without any decent documentation?? THIS IS VERY FRUSTRATING!
@@MrJaraNet This file will not download on my computer. The link will not work. Neither will the download from the Honeycomb Downloads folder. - UPDATE: Was able to download with Safari. Chrome will not download it for some reason.
Hi. I am trying to install this on a windows PC running XP12. When I run the application and after selecting English for the language I get the following errors Missing Path then Runtime Error (at 9:570) Null Pointer Exception. How do I fix this. Thanks
I am using iMac.The main problem I have is how to arrange the switches on Honeycomb throttle for my special purposes . Could you explain?
I'm confused about how to load the profile into X-Plane. It creates a joystick configuration file under the AFC bridge not the main joystick configuration page. Do I have to load this configuration in within x-plane or just activate it here, for the lights to work. They don't seem to be doing so
Thank you so much for this video .....I only ‘half’ installed it so I am happy you are explaining some more
Thanks for the videos. I have received both the HC yoke and quadrant but have as yet been unable to install them on X-plane 11.53. When I started with the yoke ... the control wheel worked but after connecting the quadrant I can get nothing to work. No support at Honeycomb.
tried to install but it keeps insisting for XP11 though I have XP12?
any upgrade for xPlane 12... thx
Re: Setup.exe - At 2:50, no matter how I change the string of characters to pick up D:/X-Plane 11, the default, etc NOTHING WORKS! I have windows 10. Cannot move forward until this is resolved.
Hi, then please use the mac version, the windows files are also in that zip file.
@@MrJaraNet My apologies I should have stated that I am using the mac version
@@kurtfrangenberg1573 so you did the installation by hand and now it works?
Access denied. cannot move the file ... I'll try again next week
@@MrJaraNet Success! Deleted all of the .zip files from Aerosoft. Uninstalled then reinstalled X-plane. Started over and everything went as planned.
Great video. One question about default profile on X-Plane. The Alt button is lit on my Bravo as soon as I enter plane. I press other buttons and they don't light up. Is that normal?
depending on the airplane you use. the default profile is using standard datarefs from x-plane
Can't get this to install. Says that "the X-Plane 11 Folder not found at that location" even though used the browse to point to the folder where the sim is installed?
Hi, but the exe file is in this location? Maybe use the mac zip version.
@@MrJaraNet yes the folder contains the X-Plane.exe file. Will give the mac zip version a try
@MrJaraNet Same here, it refuses to accept the correct installation folder.
Copying the files from the Mac installation did work, however. BTW There _is_ a Default profile, but it is not selected, and it only contains the LED definitions, no buttons or knobs, so the Autopilot stuff is not (yet) working.
the profile "default _throttle" saved and activated successfully. Please reload the profile via the upper menu in your Flight sim. Reload the profile????
Did you ever get this figured out? I'm having the same difficulty.
I followed the instructions but when I load X-plane I get AFC-Bridge AFC Yoke config could not be opened. Confusing
could you please contact the aerosoft support
I have Xplane11 with Window 10. I can't get it installed. He says that "the X-Plane 11 folder was not found in that location" even though he used the browser to point to the folder where the sim is installed? what can I do? thanks
you can use the mac version....the windows files are also in that zip file
@@MrJaraNet Thanks for the answer, but how do I do it because there is no .exe in the Mac version?
you have to copy it into the x-plane folder, like in the video
no, just the king air or c172 as from XP12
Downloaded without too many snags, but could use some detail on how to use the tool. Not really much of an expert in fiddling around, but can follow instructions (Windows/Xplane 11 scenario).
tomorrow
I have been truying for some time to configure the autopilot select buttons. You have a video that explains this for P3D, but not for x plane - why can you not do this for X Plane? it would be very simple and help a lot of people!
More generally, the “documentation” is far too brief and sketchy. How can you publish software without any decent documentation?? THIS IS VERY FRUSTRATING!
What is most frustrating it seems like every demonstration is shown on a PC not a Mac OS
Hi! No matter what I do, the installer says it can't find my XPlane installation :S....
then please use the mac version (the windows files are also in that zip file)
Why did you combine Mac and Windows in one video? Makes it extremely confusing. No offense.
where does a guy find the configurator for x-plane (MAC)? HEEEELLLLP~
forum.aerosoft.com/index.php?/files/category/126-honeycomb-profiles/
@@MrJaraNet This file will not download on my computer. The link will not work. Neither will the download from the Honeycomb Downloads folder. - UPDATE: Was able to download with Safari. Chrome will not download it for some reason.
next time put links in description instead of saying type in this bc your accent is hard to understand for ppl that arent you
OMG..Really ? How to install it? It would be better How to use it. How to use Commands and Datarefs ?
tomorrow
@@MrJaraNet Thanks mate ;-)
Sorry but not very friendly explanation too long do winded
Welp. The resource files for WIN_V2 has a password. :P
yeap, that's for the installer under Windows. You also can use the MAC Version
@@MrJaraNet Yup. Thanks!
Hi. I am trying to install this on a windows PC running XP12. When I run the application and after selecting English for the language I get the following errors Missing Path then Runtime Error (at 9:570) Null Pointer Exception. How do I fix this. Thanks