DIY SOLAR LAMP KIT V1.0

Поділитися
Вставка
  • Опубліковано 12 гру 2015
  • www.instructables.com/id/BUILD...
    You can buy PCB V2.0 : www.pcbway.com/project/sharep...
    Music by Marcus Neely
    Support Him:
    / mardeedar25
    / musicbymarcus
  • Навчання та стиль

КОМЕНТАРІ • 49

  • @stclairstclair
    @stclairstclair 6 років тому

    I bought a bag of ky8051 led driver chips on ebarf, i drew out the circuit from some dead harbor fright solar lights, the diode, capacitor and inductor are all standard so i got them from dead tv's and monitors, you can make these without a board or use a universal soldering kit board, fun!

  • @ehm2943
    @ehm2943 7 років тому +1

    love that its short and sweet.

  • @travismoore7849
    @travismoore7849 4 роки тому +1

    I want to up the coil uh to about 1mh or bifilar coil. That way I connect the near 1mh coil in the circuit while running the output of the other coil through a diode bridge back to the battery. This should up the run time a bit.

  • @MrVishalarwade
    @MrVishalarwade 8 років тому

    nice little light

  • @jonvannatto
    @jonvannatto 8 років тому +3

    Neat project.

  • @theredstonehive
    @theredstonehive 6 років тому

    Why isn't the solar panel connected to the battery while you have it on? is there a way to do so?

  • @sunilsuth
    @sunilsuth 7 років тому +1

    i have 1 watt led what changes i need to make

  • @shantaymadison5581
    @shantaymadison5581 6 років тому

    very accurate plans for something like that I found on Avasva

  • @RabiatulAdawiyah-mf5et
    @RabiatulAdawiyah-mf5et 7 років тому +3

    Where can I buy the equipment?? If you have the link can you give it??

    • @amoljoshi6546
      @amoljoshi6546 6 років тому

      You can get it on Amazon. Search for solar garden light kit.

  • @NSilver832
    @NSilver832 6 років тому

    I don't know very much about electronics but, this circuit doesn't need a diode?

  • @wasiuosman6200
    @wasiuosman6200 6 років тому +1

    can I use 5V 30mA 53X30mm solar cell instead of your one??

    • @stephenburden2084
      @stephenburden2084 3 роки тому

      I normally use 2v panel. I am going to use a voltage regulator for anything more as im not sure then hook up a second lot of leds

  • @veereshhm158
    @veereshhm158 6 років тому +1

    sir this project used components name and number

  • @kashfiimran9969
    @kashfiimran9969 4 роки тому

    What is its life?

  • @walterchristen4502
    @walterchristen4502 6 років тому +1

    Where can we purchase the circuit board? Is it available on any board house sites?

    • @aggrobert8490
      @aggrobert8490 6 років тому +1

      Walter Christen i think the IC QX5252F ist the Main Part in this circuit
      20 of Them goes Out for 1€ @ the bay

  • @miteshdhanani
    @miteshdhanani 7 років тому

    Name the product

  • @mati211p
    @mati211p 7 років тому

    Where you buy QX5252F? Are you using 0,5W LED?

    • @KennyTheB
      @KennyTheB 6 років тому

      Digikey sells just about every small electronics part in production. (Sometimes things that are no longer in production too.)

    • @stephenburden2084
      @stephenburden2084 3 роки тому

      It has a built in diode so its more simple to buid and less to go wrong

    • @mati211p
      @mati211p 3 роки тому

      @@stephenburden2084 Last time built light from 2 SOT-23 MOSFETs (Gate threshold voltage from 0,4V to 1V) and one diode.

    • @stephenburden2084
      @stephenburden2084 3 роки тому

      @@mati211p 😂👍🏼

  • @romanamerlene8554
    @romanamerlene8554 3 роки тому

    With plans from Avasva you can make it really easy.

  • @partpanwar939
    @partpanwar939 3 роки тому

    Here is the beautiful Solar post lights outdoor I like so much: amazon shops sogrand

  • @amoljoshi6546
    @amoljoshi6546 6 років тому

    Any one knows Eagle library for TO-94 QX5252F?

  • @marufpatel2077
    @marufpatel2077 4 роки тому +1

    Where should I get that pcb??

    • @opengreenenergy
      @opengreenenergy  4 роки тому +1

      The version 1 PCB is discontinued but you order the upgrade version from pcbway
      www.pcbway.com/project/shareproject/Solar_Light_Bulb_V2_0.html

    • @ecocarlisle
      @ecocarlisle 3 роки тому

      Open Green Energy I followed the link and my order is under review? Is that normal?

  • @shantaymadison5581
    @shantaymadison5581 6 років тому

    Discover how to do it with Avasva.

  • @stephenburden2084
    @stephenburden2084 3 роки тому +1

    Solar panel voltage?

    • @opengreenenergy
      @opengreenenergy  3 роки тому +1

      2V

    • @stephenburden2084
      @stephenburden2084 3 роки тому +1

      @@opengreenenergy Thats what i tend to use as well or with a voltage regulator set to 2v

    • @opengreenenergy
      @opengreenenergy  3 роки тому

      @@stephenburden2084 no voltage regulator is required. You can use solar panel of 2V output directly.

    • @stephenburden2084
      @stephenburden2084 3 роки тому +1

      @@opengreenenergy I do as im going to be using a 5v panel but im using a different circuit with smd coil and 5 pin charger chip

    • @opengreenenergy
      @opengreenenergy  3 роки тому

      @@stephenburden2084 please name of the chip ?

  • @g_willow
    @g_willow 6 років тому +6

    Well look, someone just spent over 20 bucks to make a garden light that cost under 5

  • @shantayprueeissen8914
    @shantayprueeissen8914 6 років тому

    Try some new solutions from Avasva solutions.

  • @danhardman1306
    @danhardman1306 7 років тому

    talk

  • @UshaRani-fv9kg
    @UshaRani-fv9kg 5 років тому

    We need light at night not at day fool

  • @petergenius9096
    @petergenius9096 3 роки тому

    Stop the annoying music and talk, too much of this horrible music in background on youtube, learn how to make useful videos.