Fitting and Chambering a BRUX M24 barrel to a Defiance Tenacity 2.0 in 338 Winchester Magnum
Вставка
- Опубліковано 1 лис 2024
- Geoff goes through the components of the build of a brand new Defiance Tenacity 2.0 with a 24 inch Brux M24 Barrel, and some steps taken to ensure components and of highest quality and up to standards for the job including cutting a specified throat depth and making a custom Overall Length Gauge for checking progress of the depth of cut. You will see turning of the barrel shank, threading the tennon, machining the chamber with a custom reamer, and more!
Visit our website for contact information if you are interested in this service or any other high end gunsmithing work: www.accurateri...
CONTACT US HERE: www.accurateri...
FOLLOW US HERE: www.facebook.c...
DO NOT TRY THIS YOURSELF! This video exists to showcase our services and attention to detail, and nothing more.
NO AI WAS USED IN THE PRODUCTION OF THIS VIDEO 😜 Quality is terrible, but at least you know a human made it! 🫂
Awesome video and details always love your long videos 😁
I see in wrote in that sheet the minor diameter is 0.785, isn't that small for the 1 1/6 -16 thread size?
Thanks again mate
forgive my sloppy handwriting! it's .985 rest assured! 🙃 Thank you very much for watching and for engaging the channel!!
@@AccurateRiflesandRestorations haha I can rest assured now.
This is the level of focus I reach when watching your great work 😁
Thanks mate
Can you also reset headspace with another recoil lug. I mean what is 0.253 for anyway?
hmmmm.... that's a good suggestion. Perhaps that's what the odd size is, never thought of that!
I think Whitetail was the one that made the rifling gauge and they sold out to Horny, Whitetail made good small tools for Benchrest Guys, I had the Whitetail before the Horny came out something of that nature I can't remeber
Performed a very similar development except with a Bartlein M24 contour barrel and a Palma barrel, defiance Anti-X action with an AG composite stock. When I do my part I have no problem consistently scoring in the 190s at 600. I believe you can get 3000fps with the right brass powder bullet combination with the shorter barrels too
Great Vid New Sub 👍👍👍👍👍👍
Thanks for the sub!
@45:38 - Is the bottom of that front rail thread not cleaned out? Is that metal I am seeing? Is that normal? Nice video.
It didn't go all the way through (I do point that out early on in the video). May have been a CNC robot error, or intentional. I don't know. I was contracted to do the machine work and was not present for scope base mounting, so I cannot comment on if it was an issue or not.
You can have one, it's called the classic now..
If I recall correctly, the Tenacity was replaced with the Classic
seems to be the case... almost exact copy, wonder what that was all about...?🤔
Probably something to do with the rights on names
Interesting throat reamer!
It is quite nice!
I saw a video once from a well known bench rest shooter that said you should fireform the case to the chamber then knock the shoulder of the case back a couple of thousands and then make the gauge. I realize you cant do that in this case, just thought I would pass it along
That's correct and preferrable. However, in this case (as you know), it was simply a way to check and verify the depth of cut as Geoff pushed the throat back. For an OAL gauge for bullet seating depth, one would fireform as you say so it's a perfect match to the chamber avoiding any false readings. Thanks for watching and engaging the channel!!
NP, really enjoying learning and watching a skilled gunsmith
Mi interessa per una carabina m16il prezzo contattami