Update: I see everyone wrote on here about 2 to 6 yrs ago. But I recently bought my lights off someone on EBay. They also advertise on UA-cam about the whole plug and play. But on thing they didn't mention was the fit. My lights didn't align properly. When you install them the side that is suppose to be flushed with the quarter panel and insert into the two pins. They don't reach all the way and fit flush along side the body (both sides) once you left the tail gate and screw in the lights there's a huge gap where the run off water is suppose to travel (exactly where screws are placed on both sides) that too does not sit flush as the stock lights. After installing mine the lights where not aligned if you close life gate and look at the sides or where gate meets the lights ●| |●. Overall the lights turned on and worked for the time being but the cosmetic/ fit is poorly measured which in turn make the car look like $hit. The ones I bought where made by Spyder but sold by a seller named OEmassive out of California. I believe they know the lights didn't fit as advertised. Hope this helps the next buyer
@@L663 Hey bud, after a year of having the lights. I got them installed by an auto body shop near my my home. They got the lights to both fit flushed. That was outstanding in their part for taking on the task. But this isn't the reason why I wrote almost a year later the right side passenger light (brake) light stopped illuminating. The whole unit works and when the lights are turned on the light up, single light, reverse light, and rear fog light. But when I apply the brakes, the light does not get darker to signal vehicle is stopping or coming to a complete stop. Since it's been a year I know I probably lost out on my money for the purchase. My question to you as an outstanding mechanic and installer. I wanted to know of there's something I can do to fix them? I checked fuses and none were blown. Now I don't know where to begin of it's the actual lights. Please help!!! Thanks for any assistance.
@@mrrgarcia022274 Hi - the first test with a problem like this is the swap the LH and RH lights over - now i know what you are going to say " they wont fit !" correct but actually there is no need to install them just rest them on the tailgate and plug them in. If the "fault" swaps to the left side you know the problem is the lamp itself. If the problem remains on the right side you know the issue is with the car electrical system. Let us know how you get on. Again i am not sure you actually purchased our lamps - but i am happy to help anyone !
Update: I see everyone wrote on here about 2 to 6 yrs ago. But I recently bought my lights off someone on EBay. They also advertise on UA-cam about the whole plug and play. But on thing they didn't mention was the fit. My lights didn't align properly. When you install them the side that is suppose to be flushed with the quarter panel and insert into the two pins. They don't reach all the way and fit flush along side the body (both sides) once you left the tail gate and screw in the lights there's a huge gap where the run off water is suppose to travel (exactly where screws are placed on both sides) that too does not sit flush as the stock lights. After installing mine the lights where not aligned if you close life gate and look at the sides or where gate meets the lights ●| |●. Overall the lights turned on and worked for the time being but the cosmetic/ fit is poorly measured which in turn make the car look like $hit. The ones I bought where made by Spyder but sold by a seller named OEmassive out of California. I believe they know the lights didn't fit as advertised. Hope this helps the next buyer
Thanks for the comments - lets hope people buy our lamps not the ones your purchased from another source
@@L663 Hey bud, after a year of having the lights. I got them installed by an auto body shop near my my home. They got the lights to both fit flushed. That was outstanding in their part for taking on the task. But this isn't the reason why I wrote almost a year later the right side passenger light (brake) light stopped illuminating. The whole unit works and when the lights are turned on the light up, single light, reverse light, and rear fog light. But when I apply the brakes, the light does not get darker to signal vehicle is stopping or coming to a complete stop. Since it's been a year I know I probably lost out on my money for the purchase. My question to you as an outstanding mechanic and installer. I wanted to know of there's something I can do to fix them? I checked fuses and none were blown. Now I don't know where to begin of it's the actual lights. Please help!!! Thanks for any assistance.
@@mrrgarcia022274 Hi - the first test with a problem like this is the swap the LH and RH lights over - now i know what you are going to say " they wont fit !" correct but actually there is no need to install them just rest them on the tailgate and plug them in. If the "fault" swaps to the left side you know the problem is the lamp itself. If the problem remains on the right side you know the issue is with the car electrical system. Let us know how you get on. Again i am not sure you actually purchased our lamps - but i am happy to help anyone !
Hi - we can send these to the US but they may also be on ebay US ?
Halle can you retrofit range rover L494 headlight to the 2018 - 2019 lights
Nice one. Easy to understand. Thanks
When i upgraeded one ploplem its comming , i hear the sond signal to fast and one light in dashpord comming !!?
Why ?
What resistor do you need ?
www.powerfuluk.com/vehicles/range-rover-evoque-sport/sport-2005-09/lamps-light-upgrades/range-rover-sport-2010-led-rear-light-conversion-indicator-ballast-resistor-kit.html
Hi these are on our website - please google "Powerful UK Ltd" and you will find us. I cant post a link in youtube comments !
powerfulukltd which is the light on your site that fits my 08 Range Rover Sport? I don't see the ones on this video
Thanks
where can i get these led lights from????
@diljotshoker1 see you outfitting that cruze