I guess 20 minutes was a little optimistic ... I have never actually timed the fitting start to finish when we have done it. I hope the video gives people the confidence to have a go themselves ! ( even if they don't buy from us ). Thanks for the comments.
Just fitted my pair, couldn't get the screws out on the wheel arch, all the holes under the sill were clogged up with dirt/rust so took ages to get any bolts in, the poppers cracked when putting the plastic back on and the step took a right shove to get in place...but looks great afterwards, thanks for the vid
Hi you are correct - Originally Landrover did supply the pre-cut sill with the kit but i guess cost down pressure ( cost not sales price ! ) means that this is no longer included. They should give some indication of how / where to cut in the instructions.
I know this I a fairly old video, but it's really well put together and you guys do make it look like pretty straight forward. I'm wondering whether you guys do a fitting service at all? Thanks
Excellent video, one of my side steps frame has snapped so was looking to see how easy a job it was to do, I imagine our local stealership will charge well over £500 to do this, so buy a set of steps off eBay for about £100, and by the looks of it an hour or so of my own time. And the brucie bonus as we say here in great Britainshire I can repaint the sills whilst I’m at it and everything is off. Thanks for another superb instructional video, you guys are great.
I appreciate this is an old video and you no longer sell these but if I already have OEM side steps already fitted, would the step part fit onto the original brackets? TIA
Thanks Guys, vid was great. I have the 2008 Range Rover Sport and it appears the step on the passenger side has rusted underneath. Is this common given that the car is 12 years old. I will be looking to replace them both or one soon. How much are new/used replacement steps as it looks like i could fit them myself as its a replacement?
If you have steps already fitted some of the hard work is already done The steps do suffer with brackets rusting - look on ebay etc for replacements they are not that expensive.
well i did it today:) it took for me 5 hours. but i had to cut original plastic parts. but after that i got CHECK ENGINE light. are there any cables inside the body and is it possible to short them?
Old video I know, but have you discontinued selling these? One of my 2007 side steps the chrome strip is pinging off, looks like the rivets have succumbed to corrosion Thanks
Hi - we stopped selling them as the market was flooded with cheap product and we could not compete. They are heavy and bulky to stock so we stopped selling them. The rivets are most likely aluminium so should not rust as such although they do corrode. It could be steel underframe ?
На пороги денег хватило, а на новую резину не хватает? И вообще когда крутишь болты-гайки, крутить надо гайку, а не болт, во избежание повреждения резьбы. 6:48 показано.
I installed this kit & I had to cut my original OEM moulding bcuz the pre-cut 1's that came wit the kit, are made out of real cheap material & wasn't lining up right... So anybody interested in buying my pre-cut let me know, cuz it's just sitting in garage. I except PayPal 😀😀😀
This was the first mod I’ve ever done on any car. Thanks a lot guys
Old Video, But still very very helpful. I just bought and installed mine today. Thanks guys.
Fitting this weekend. Thanks for the video. Looks a lot easier than I thought it was going to be.
I guess 20 minutes was a little optimistic ... I have never actually timed the fitting start to finish when we have done it. I hope the video gives people the confidence to have a go themselves ! ( even if they don't buy from us ). Thanks for the comments.
powerful UK Ltd
Tu sei un grande uomo!!grazie mille per i tuoi tutorial,i migliori del mondo
Just fitted my pair, couldn't get the screws out on the wheel arch, all the holes under the sill were clogged up with dirt/rust so took ages to get any bolts in, the poppers cracked when putting the plastic back on and the step took a right shove to get in place...but looks great afterwards, thanks for the vid
Hi you are correct - Originally Landrover did supply the pre-cut sill with the kit but i guess cost down pressure ( cost not sales price ! ) means that this is no longer included. They should give some indication of how / where to cut in the instructions.
Excellent
Excellent video.
Where did you purchase this kit from? I would like to get that same kit that includes the pre-cut panels.
great video...thanks
I know this I a fairly old video, but it's really well put together and you guys do make it look like pretty straight forward.
I'm wondering whether you guys do a fitting service at all?
Thanks
This is an old video - we do not sell this item anymore and do not offer fitting - sorry
thanks for the kind words !
Thanks for video
Liverpool FC 😉
Excellent video, one of my side steps frame has snapped so was looking to see how easy a job it was to do, I imagine our local stealership will charge well over £500 to do this, so buy a set of steps off eBay for about £100, and by the looks of it an hour or so of my own time. And the brucie bonus as we say here in great Britainshire I can repaint the sills whilst I’m at it and everything is off. Thanks for another superb instructional video, you guys are great.
I appreciate this is an old video and you no longer sell these but if I already have OEM side steps already fitted, would the step part fit onto the original brackets?
TIA
Gde mogu nabaviti komplet set stepenika
I heard the original sills have marks to ahow wear to cut..is this true. I have a kit with no pre-cut sill and I plan on doing this , this weekend
Thanks Guys, vid was great. I have the 2008 Range Rover Sport and it appears the step on the passenger side has rusted underneath. Is this common given that the car is 12 years old. I will be looking to replace them both or one soon. How much are new/used replacement steps as it looks like i could fit them myself as its a replacement?
If you have steps already fitted some of the hard work is already done
The steps do suffer with brackets rusting - look on ebay etc for replacements they are not that expensive.
Or because people with smaller cars open the car doors and hit your paintwork ( unless you have side steps fitted )
Hi this kit with the pre-cut sills is from our website - google "powerful UK Ltd"
Where can I buy some steps for a Range Rover sport 2019 please
We do not sell them due to their size / risk of damage in post.
well i did it today:) it took for me 5 hours. but i had to cut original plastic parts.
but after that i got CHECK ENGINE light.
are there any cables inside the body and is it possible to short them?
Paulius Sukys it was EGR P140A. i think its not because of side steps :)
What are the names of the can of grease (used on bolts) and the bottle of oil (used on edge)? Thx
Copper grease. For the edges, you can use any household oil or lubricant. You can even use the liquid soap used for washing utensils
Love your videos .. can you update this videos and some side steps with the new range rovers ??
Old video I know, but have you discontinued selling these?
One of my 2007 side steps the chrome strip is pinging off, looks like the rivets have succumbed to corrosion
Thanks
Hi - we stopped selling them as the market was flooded with cheap product and we could not compete. They are heavy and bulky to stock so we stopped selling them.
The rivets are most likely aluminium so should not rust as such although they do corrode. It could be steel underframe ?
Yes, looks like the rivets have corroded. In two minds to repair or replace with shiny new ones 😄
The have slightly different fittings than the one i got, hopefully will not be a problem
I use this company on eBay and they are top sale🤝
rear tyres nacked ?
На пороги денег хватило, а на новую резину не хватает? И вообще когда крутишь болты-гайки, крутить надо гайку, а не болт, во избежание повреждения резьбы. 6:48 показано.
I installed this kit & I had to cut my original OEM moulding bcuz the pre-cut 1's that came wit the kit, are made out of real cheap material & wasn't lining up right... So anybody interested in buying my pre-cut let me know, cuz it's just sitting in garage. I except PayPal 😀😀😀
I did the same. The pre-cut ones with the kit impossible to fit in properly
А что такая резина потёртая? Выступает в F1?
Так надо!
Looked on the site, looks like you no longer sell these, Ebay it is then
No these got so cheap we were selling at a loss - but enjoy the video and hope it helps !
@@L663 it will help once I receive the item so thank you for the help on the video
why would a road car need a step? oh right, because its laughably oversized!
Because there are a few smaller people on our planet in case you hadn't noticed!