Aoshima HONDA CB400 Italian Gal On CafeRacer
Вставка
- Опубліковано 5 сер 2024
- Aoshima HONDA CB400 Italian Gal On CafeRacer
#scalemodel #cb400 #aoshima
*Index
0:00 Prologue
0:50 engine, frame
7:37 Wheel, chains
13:44 Brakes, kickstands, shift pedals
15:38 handlebars, etc
18:06 Fuel Tank, Seat
20:32 Exhaust
21:42 Italian female rider
27:32 Old Road (base)
30:47 Complete photo
4 cycle caferacer and female rider
This time I also put a female rider on a motorcycle.
The act of putting a female rider on a motorcycle is likely to become a staple of my 1/12 model motorcycles.
Making Aoshima Honda CB400
It's my first time making Aoshima models, but the recent kits are wonderful.
Accuracy is a 1/6 class kit in terms of scale.
It was a perfect kit that did not accept any idea of the creator what to do.
On the contrary, it was a kit that required basic modeling skills such as base preparation and adhesion.
change point
⚪︎ I made a carburetor funnel with an aluminum pipe.
⚪︎ Since the battery is a clear part, I made a cell with a plastic board.
⚪︎The spokes are also solidly made, but since they are 0.6mm, I changed them to 0.3mm stainless steel spring wires.
⚪︎ I replaced the seat with a racer type seat.
⚪︎ I changed the turn signal to LED type.
⚪︎ I attached a mirror to the grip.
⚪︎ I remade the rear brake rod.
⚪︎ I shortened the muffler.
Painting
I was worried about the coloring of the tank.
Red, blue, and yellow are the standard colors for this motorcycle, but I painted it light gray and coated it with blue pearl.
The characteristic exhaust has been given a burnt color to make it stand out.
Creating a 1/12 figure
This time, I used a 1/12 body and molded it with epoxy putty.
I'm still in the process of trial and error, so I can't introduce any tips, but I'll share it once it's established.
stage
I made it in the image of an old decayed road.
Next, I would like to make a 50cc racer which female rider is on. - Навчання та стиль
40年前、学生時代、バーエンドミラーつけて乗ってた4フォア。シートとマフラーは、まさにこんなにしたかった!いや、かっこええーぞ!
CB400の現役世代ではないですが、あの時代にカフェレーサー的なデザインのバイクを出した事が凄いと思います。
400で止まってしまいましたが、750でメーカー手曲げの集合マフラーを出していればどうなっていたか、ホンダって凄い。
それ以上に学生時代に乗っていたなんて、本物のバイク好き!
ただただ圧倒されました。まるで実車が躍動しているような貴兄の素晴らしく美しい作品の数々を拝見してしまうと・・・もう自分で作る気力すら失せてしまいそうです。本当に素晴らしい作品に感動しました。
ありがとうございます!
今、アオシマのCB750 K0作っています。構成的にCB400と似ています。
キットレビューを中心に基本に忠実に作ろうと思っていますので、その時はまた見てやってください!
いつもありがとうございます!
このバイクとヤマハRD400は私の子供時代の憧れでした 本当にかかっこいいバイクです
ほんとですね。
この頃のバイクってスーパーカーと同じで夢がありましたね。
コスト度外視で他社、他国との競合から個性的なバイクを作って行って欲しいです。
あっ、外国人のへんなレスが付いていたので、消しました。
ありがとうございます!
「私もCB400Fを作ろう!」と絶対に思わせない出来に感服。
仕方ないので実車で我慢(?)します。
私は実車に触れることも出来ないので模型で我慢しています。ありがとうございます😊
素晴らしいとしか言いようがない。
ありがとうございます!
もう少し頑張ってみます!
Another great model of yours! Thanks for the English subtitles, this is just a tutorial for every modeller!
あなたの素晴らしいモデルがまた一つ増えました! 英語の字幕をありがとう。これはすべてのモデラー向けの単なるチュートリアルです。
Thank you for your kind comment.
There may be mistakes in English notation, pronunciation, and differences in interpretation, but I will be careful not to make any mistakes as much as possible.
I hope you will continue to watch the videos.
Incredibile .Davvero incredibile il livello di realismo raggiunto
Grazie.
Ho cercato su Google le città italiane e le donne che vanno in moto.
La città d’Italia è una città meravigliosa.
素体をそうやって使うなんて🎉
目から鱗です。
針金と粘土から作る精神的苦痛から解放されますので、是非!!!
コメントありがとうございます😊
Thank you for the experience of watching this. It was fantastic . I don't think this is the girls bike. She is probably sick of her older partner's jealousy and is taking his CB for a long ride. She will be back 😊
Thank you for your comment.
And thank you for your advice.
I envisioned an American woman, but in the future I will make a more mature version with a larger body.
Your work is amazing the details are incredible. One thing I would say is were are the air valves on the tire rims.
Thank you for your comment.
And thank you for your very good comment.
I forgot to add the air valve.
I noticed your comment.
I was making an air valve using brass pipe.
From now on, I will remember to install it.
thank you!
Amazing work. Fantastic build 👍🏼
Thank you so much❣️❣️😊
Outstanding craftsmanship. A pleasure to watch you create a piece of art.
Thank you so much ❣️❣️❣️
Thank you for this fantastic and detailed build, respect !
You’re welcome !
Thank you for your comment!!
Your work is beautiful, thank you for sharing your videos.
I am always thankful for your comment!
Simply terrific! Many thanks - Tom (from France).
Always thank you for watching my video, and comments!!
Merci de toujours regarder la vidéo et de commenter!!
写真のように再現するのではなく、絵画のように表現されているので、オートバイ単体でも、ドラマを感じさせるジオラマの趣がありますね。
あ、スポーク張り替え用の自作治具、大変参考になりました。
こんにちは、古い模型ばかり作っていましたので、甘いディテールを蘇らせたいとのと、模型的な嘘(塗装)の部分とリアルをなんとか一つに出来ないかと、少しずつですがトライしています。
見苦しい所もあるかと思いますが、塗装のゴールは程遠いです。
スポーク治具、リムの合わせ目消しと塗装の為ですけど、少しコツが必要です。
これも、製作方法が定まるよう努力中です。
ありがとうございます😊。
Liked! Subscribed! In absolute awe.
Thank you so much❣️❣️
The detail so amazing and you build this model kit so properly 😮
Thank you so much ❣️😊
You’re work is superb.
Thank you❣️❣️
静止画だとディスクブレーキの雰囲気最高ですね
ありがとうございます。
写真は完成状態なので、動画と異なっているかもです。
Super bien fait et original
merci.
Nous envoyons des mots de gratitude du Japon !
Absolutely stunning! Amazing skill.
Thank you sir ❣️❣️
Very cool, extreme skills.
God bless you.
Thank you so much, and god bless you too🙏
super travail bravo elle et magnifique
¡gracias!
¡Seguiremos haciendo mejores obras!
Great looking build 👍👍
Thank you do much!!!!
Perfect, great great artist, high level of your art
Thank you so much ❣️
Perfetto!!!
Thank you!!
Ah - the legendary CB 400 with the "four into one" exhaust system and the characteristic sound.
My friend "cleaned" the inside of the silencer, after which it was a "four into nothing" system with a very characteristic sound :-=
Very nicely built!!
This motorcycle did not sell well because it was too expensive to manufacture, but it is now at a premium price in Japan.
It was a legendary motorcycle.
Thank you to you and your friends!
Spectacular !
Thank you so much 😊❣️
Very good 👍
감사합니다! 매우 기쁩니다.
Thank you so much😊
¡Un trabajo maravilloso! ¡Enhorabuena! 😍👍
¡gracias!
Estoy muy feliz por tu comentario!
Professional 👍
Thank you😊😊😊
すげー!あなた、天才!🎉
ありがとうございます!
Superrrrrrrrrr🔨👍🤘
Thank you❣️❣️❣️😊
Very good job congratulations
Woww !!!! Thank you so much!!!!
Perfeito!!!
obrigado!
ライダーまで作るの凄い!
ありがとうございます!
フィギュアはお恥ずかしい限りです😅
Espectacular y me quedo muy corto.
Gracias estoy muy feliz❣️
Amazing, such dedication and wonderful result. 👍👍👍👍🍻
Thank you❣️❣️😊😊
Just phenomenal! Were you able to get water inside the battery😂
It only contains air🥹
Siempre es increíble tu trabajo , por favor podrías decirme las referencias de las pinturas que usas para yo comprarlas
Es muy interesante el proceso desde el color óxido hasta el resultado final 😁
¡gracias!
En el futuro, resumiré las pinturas, los pinceles y cómo usar cada color, y los escribiré en la columna de resumen.
Me preocupa un poco cuánto puedo explicar en español porque cubre muchas ramas.
Suuuuuuuuuper
Thank you!!!!
@ゆっちゃん
素晴らしい工作技術にいつも驚嘆しています。
よろしければ、使用材料その他について教えてください。
・コード類のビニールチューブ?の商品名は何ですか?又、今回使用しているその径は?
・電線には何をつかっているのですか?
・アルミパイプと真鍮パイプの特徴とその使い分けを教えてください。
・洋白線と真鍮線の特徴とその使い分けを教えてください。
・よく塗装の初めにオキサイドレッドを使われていますが(今回のエンジンでも)、サーフェイサーとし てですか?
・各種金属に使っているピンバイスのビットはプラモデル用でよいのでしょうか?
・よくパイプの端部をつぶして蝶ネジに加工されていますが、そのテクニックを少し詳しく教えてください。つぶした端部を半分に割るのには何を使っているのですか?
以上です、長くなり恐縮ですがよろしくお願いします。
ご質問ありがとうございます!
コード類:
タミヤパイピングケーブルで0.5から全て揃えています。
オートバイはスケールに合わせて0.65から使っています。
⚪︎電線
市販の電線の被覆を剥いて、心線を使っています。
太さのある管などは糸はんだを使っています。
アルミと真鍮パイプ:
カラーリングで使い分けています。
強固な接着、ハンダ付けが必要な場合は真鍮パイプを使い、曲げや潰し加工が必要な場合、アルミパイプです。
⚪︎洋白線と真鍮線
カラーリングで使い分けています。
洋白線は真鍮線より曲がりにくいので、シャフトには洋白線、複雑な曲げ加工の必要な管類には真鍮線を使っています。
ハンダ付けは同等だと思いますが、接着は洋白線の方が優れていると感じます。
真鍮線は洋白線より塗料が乗りますし、酸化していい具合に劣化色が付きますので、古いバイクの配管には迷わず真鍮です。
⚪︎オキサイドレッド
ウエザリング効果を出したい時に使っています。
ウエザリングはエナメル系の塗料を使っていますので、ラッカー塗料を若干溶かし、薄く赤茶色が出てきますので、いい塩梅になるからです。
世の中にはラッカーの上にエナメルOK、その逆NGとありますが、そんな事はありません。
効果的であれば、なんでもします。
溶剤は専用使うべきですけど。
⚪︎ピンバイス
プラモ用というか、金属用であればなんでもOKです。
ただ、筆もそうですが、安物はやめたほうがいいです。
入手が容易ならタミヤのもを使っています。
⚪︎蝶ねじ
アルミパイプにアルミより硬い、ステンレスバネ線、洋白線等を差し込んで、平らなペンチで軽く何度も潰していくと、自然とアルミは切れていきます。
ただ、アルミの厚みと差し込む金属の太さの差が大きい程効果的にアルミが二分されますので、トライアンドエラーで限界を知ると使える用途がわかるかなと思います。
ご質問ありがとうございます。また、何かご不明な点がありましたら、コメントください。
早速にも丁寧な回答ありがとうございました。@@scalemodeler
Your build videos are so informative and fun to watch. Thanks so much for sharing. When you brush paint, do you use any thinners or paint retarders?
Thank you for your comment!
Brush painting uses enamel and acrylic paint, so I use enamel thinner and water.
Your work is fantastic, I am so impressed. Where did you get the figure from?
Thank you for your comment.
The figure is my own work.
It was scratch built with putty.
👍👍👍
Thank you❣️❣️
👏👏👏👏💯💯💯💯
Thank you❣️❣️❣️
Your work is outstanding! Where did you get the cafe seat?
I use Honda dream 50 that is aoshima kit.
Thank you😊
神人等級
ありがとうございます!
光栄です!
thank you!
It's an honor.
Very, very impressive!!! Any idea how many hours of work it took to complete the model? Thank you for sharing this!
thank you! ! !
I will try my best to make better models!
Great Work, absolutly a masterpiece!!!
Encore une très belle réalisation,une mine d’informations pour maquettiste averti 🙏
New subscriber here.
Wow❣️Thank you 🙏🙏🙏😊
👏👍🙌 ❤
Thank you❣️❣️😊
😉
😮😮😮 !!! !!!
🙌😊😊😊😊❣️
Moto Guzziの製作を楽しみにしています
あっ、あれですね!
入手したら早速つくりますね!
素晴らしい出来栄えですね!惜しむらくはライダーの首の角度。。あえてそうなされたのかもしれませんが、失礼な発言お許しください。
失礼だなんて、とんでもないです。
やはり、顔は上向きが良かったですね!ギュイーンな感じと思っていたのですが、悩んだんです。
1/12バイクにはフィギュアをセットでと考えていますので、顔の向き等、細かい所、これから進歩していきます!
ありがとうございます!
What solution did you use to remove the chrome?
I always use bleach.
thank you!
is it going to have a figurine
素晴らしいです
もし可能であるなら動画機材を教えて頂けませんでしょうか?
ありがとうございます。
動画はsony a6600です。もう、塗料やプラの粉塵でボロボロになっています。
@@scalemodeler 歯科関係の仕事に従事していて自身の仕事の動画を撮りたいと以前から考えていたところこの動画を拝見するにあたり質問させていただいた次第です
早速の回答ありがとうございました。
模型も多少はかじってはいるのですがレベルが違いすぎて参考になりませんが(笑)
@@inreach38 ああ、それでしたら、軽いZV-E10か、さらに小さくて邪魔にならないZV-1IIをお勧めします。
ありがとうございます!
@@inreach38 折角見て頂いたのに申し訳ないです🙏
もっと分かりやすい動画を作れるよう努力します😊
コメントありがとうございます!
new one tomorrow?
Sorry, It is scheduled for Friday, the 8th, around 19:00 Japan time.
thank you!
@@scalemodeler i will be watching
凄い、人小さいけど。
はい、身長にして158cmは小さいですね😊😊
このキット、やるな。組みたい、でも暇が無い。ワラ。
忙しいという事はいい事です!
ありがとうございます!