Workshop Wednesdays: King & Charles Cabinet Hardware Jig
Вставка
- Опубліковано 6 жов 2024
- This job is usually a pain in the butt... BUT, this jig makes it much easier and perfect every time!
King&Charles Cabinet Hardware Jig, Aluminum Alloy Cabinet Handle Jig - Cabinet jig for handles and pulls, Drill Guide Sleeve Drawer Pull Jig Tool for Cabinet Knobs Pulls. a.co/d/c9AaSZO
![[UA] NAVI проти G2 Esports | Blast Premier Fall Final](http://i.ytimg.com/vi/QWlIm4FGESQ/mqdefault.jpg)
Sam you are supposed to used the jig when you are drilled the holes too! That's what helps you drill at the perfect 90 degree angle. Another thing I picked up from the many videos on this tool is you drill the first hole (using the jig) then put one of the screws into that hole and it will secure the jig so that you don't accidently move the jig before drilling. Also, I would check the measurements with a tape measure on the device before drilling. These cheaper tools are know to be slightly incorrect on their rulers. But thanks for posting I need all the info I can get before I mess up my brand new cabinets...
Thank you for the useful tips!!! And good luck with yours 😁👍
I was looking at these on Amazon and this model is designed to use as a marking tool only. My guess is it doesnt have hardend steel guides.
@@thisandthat3954- you are correct. the True Position jig is $200+ and has hardened guide holes. This one has aluminum and the holes will wear with drilling, so it's only for marking.
Looks like a great tool. I also just painted my cabinets white. I will install black handles as soon as I receive this tool. Great video, thanks.
@memotijuas Thank you very much! Glad you liked it 🤠👍
Thanks for this! Installing some hardware for a friend on some shaker panels. Hoping it works out as well as it did for you
@@byjustincustomwoodworks You're welcome! Once you get it set, you're good to go. Good luck 🤠👍
Thank you for this video, I usually watch these to make things easier for my husband 😂
You are so welcome! Sometimes when I'm starting a video, I wonder if it will be useful or enjoyable and this one surprised me. Glad you got something out of it 👍
I just received one today. I like the tip at the end, taking a picture of the setup for the specific hardware.
Thank you! It is really easy to use once you get the hang of it 😁👍
I have the all-aluminum version of this jig (the metal one you have does have some plastic parts). It is just as good as the professional version made by a famous manufacturer, but costs 1/4. It is super helpful for mounting cabinet hardware.
I agree! It sits in my toolbox a lot, but it sure is handy when I need it 😁👍
Great tips. I’m in the same process now and wasn’t sure how to use it…but I know how thanks to you. Great Job!!
Thank you very much!!! I'm so happy I could help 😁👍
Great idea at the end to use the cell phone to take a photograph. The diagram in my instructions has the T-square on backwards! And it's an interesting that you received a punch tool, some do not have it- Sometimes even more accurate to take the doors off. And watch your thumb near the drill bit.
Thank you for posting.
Thank you! I'm so happy this helped 😁👍
Thanks for sharing Sam. That jig is definitely a great tool to have. I will be ordering one.
Pretty Cool Tool Sam!!! Thanks for showing me this tool 😁It will come in handy👍 just add it to my wish list. In the past I made a jig out of scrap wood but it took more time then using your tool and it only worked on one type of handle. Thanks for the video.🚜💨
Great video. But just a heads up, if you buy one of the cheap ones, make sure the rulers are accurate.
Thank you! 👍
I drilled through the jig. Easy and fast. Make sure to tighten the screws up good so nothing moves.
@@JP-ATV Thank you for the insight! It sure is handy 🤠👍
Nice tool ! Professional results…..win win 👍👏 Rick
Excellent work sir thanks
Too kind! You are very welcome 🙏
Nice tool
@@georgemartinez892 It sure is handy 🤠👍
Based on the directions I received, same as your unit, the bottom piece should be flipped 180%. The rivets at the bottom towards the end of the ruler. Granted, there is less adjustment then when it gets near the top.
Thank you! I'll watch for that the next time I use it 👍
Thanks for your help.
You are very welcome 🙏
sweet tool!!
I think so too!
It is better to place the hinge behind the device and put in the screws through the jig holes. No measuring is needed. Tighten the jig, remove the screws and off you go!. It is best to drill through the holes.
Thanks for the tips! Great advice 😁👍
I just got one and watched many videos instructions I got were not clear!
Sorry to hear that. Hope my video helped!
I found the plastic one I ordered to be not be accurate. when flush against the door the variance from top hole to bottom hole was 1/16". I returned it and am trying to find a better product. Many of the reviewers on Amazon are having similar issues.
Thank you for the comment. I hope it will help others to decide what to choose 👍
In the Amazon link it showed a pvc one, a metal one, & an aluminum one. It just about doubles in price going from plastic to metal & again to aluminum. Looks like you got the metal one. Now that you know how it works (that you don't drill through it) do you think the pvc one would work just as well?
Good point. Definitely could work just as well. I'm still happy I got the better one. Just the way I am.
Show install of a handle on the drawer using the same tool.
Good idea! It works but you actually do have to use the tool differently for that.
I just bought a similar jig, but the holes are not plum by a 1/16". Its driving me crazy as to why its happening.
Omg, that has to be a manufacturing mistake. I would return or exchange it. Good luck! 🤠👍
Be warned the hole on the center ruler does NOT line up with the rest. It's about 1/8th inch lower and will throw off your holes
Thanks for the heads-up!
I think it's a good tool can I buy it at Home Depot what's the name of the tool
Thanks! Yes, I liked it. Definitely better than measuring every single hole. Here's the Amazon link:
King&Charles Cabinet Hardware Jig, Cabinet Handle Jig, Cabinet Hardware Template Tool, Drawer Pull Jig - Cabinet Jig for Handles and Pulls a.co/d/7BUYBtG
thanks ... 3:30 helped seeing it in action
You're welcome!
Why you hide it ?
@@andynguyen7816 idk
The drill bits wouldn't come close to the plastic
Definitely would not do that. I like using the punch tool 👍
Pls provide type and size of dril bit
1/8 inch wood bit. I believe it was Dewalt 👍
What size drill bits are using?
Good question. I believe I used a 1/8" bit but that may change depending on the size of the screw that comes with your hardware. It should tell you the proper sized bit to use on the hardware packaging. Hope this helps!!! 😁
1/8 is too small, most suggest 3/16, yet the screw is slightly smaller- I have never seen a 'hardware package' mentioned the size of the hole!
3:18 in and still no exclamation on how to use the product. Stop rambling!
Opinions vary 👍
@samsdoinstuff Has nothing to do with opinions it's the truth.