Humvee Differential Overhaul and Output Flange Seal Installation- LSxHumvee

I needed to replace an output flange seal / axle seal on LSxHumvee so while I had the differentials out I went ahead and had ARB Air Lockers installed and just did a quick overhaul on everything. I ran into a few issues with the axles not seating correctly in the bearings but you'll see in the video that corrects itself when you install the output flange on the axle.
Seal from Hummer Parts Guy #6009472 - www.hummerpartsguy.com/SEAL-A...
Star Washer from Hummer Parts Guy #5939517 - www.hummerpartsguy.com/SEAL-A...
The PVC used was all 2" PVC from home depot, worked perfect and never broke.

[@tjhicks5574]

Great video. Thank you for sharing your experience, obstacles and successes with others.

[@keganmowery4223]

Thanks for the tips. About to swap my seals too when parts come in.

[@tduncan9938]

Hey i’ve seen all your videos …very nice… so it’s been five years do you still have your Hmmwv??

[@robb3489]

Did you install the ARB? any video?

[@TysonCapel23]

What's the advantage of having an air Locker when the Humvee already come with a Torsen differential?

[@LSXHumvee]

The Torsen is a good differential but not the same as a locker. It slips quite a bit even with brake modulation. Running the much larger 42" tire I didn't want to have to worry about spinning the tires up and working the brake to give me the kind of traction that would allow slow controlled crawling. The locker is just a more efficient option and selectable for street driving and off road use.

[@TysonCapel23]

@@LSXHumvee nice! Thanks!

[@mecanikamatir8262]

Hi friend, do you know? I changed my final gear so it is lighter. But why do you hear a rough voice from my axle. What do you think is wrong?

[@masonmainpage4105]

Put seal in freezer before install

[@1EVILC6]

How do you like the new lockers?

[@LSXHumvee]

Other than just testing them out I haven't had a chance to get into the woods to try them. I'll post a video update of locked vs unlocked when I do.

[@FirstNameLastName-hy2iz]

@@LSXHumvee have you had a chance to test it out in the woods?

[@talesvistik]

Press on bearings are usually pretty tight.. bro..

[@Agia]

Sounds like you should have taken it back to the shop for a refund lol

[@baum525]

What locker did you use

[@LSXHumvee]

ARB Air Lockers

[@Itsaboutthewaterlife]

Dude: why you aren't working at American General is beyond me.

[@the_slow_sti]

$$$$$

[@titoomar8019]

His tock too much

[@bigcpimpdaddy7217]

Too much work, dont fuck with it..