Looking at the Zhiyun website (and some other dealers it seems to me that the company doesn't really want to support/make the MasterEye anymore. I don't know why since I think that this product was an amazing idea that needed some more work in terms of software. I also could not find a camera support list for you...
Nice review, can I still use the combo of video transmitter and master eye controller to control my camera recording without gimbal . I don’t want to buy a gimbal, just want to make sure the combo still works independently for live viewing and camera controlling. I just need to control start or stop recording remotely. And don’t want to use my phone to connect zhiyun wifi every time. Is that possible? Thanks in advance.
Would you try removing the cable between the gimbal and the transmitter, to see if the master eye controller is still capable of controlling some parameters of the camera? Let me know when you find out. Thanks very much!
I think that Art did test it without the gimbal and it worked but I am not 100% that you don't need the gimbal for some initial setting - I'll ask him.
While its great it allows a tablet to connect to act as a control surface, a video only screen would also serve as a director screen with access to the controls screen password protected.
No. In general, this is an abandoned product. Which is very sad. I hope that something along these lines will be manufactured and supported by a different manufacturer in the future.
Здравствуйте , купил стабилизатор weebill 2 вместе с трансмиттер ли. Целый день мучаюсь, кабеля все правильно подключиль по инструкции. В режиме фото на обоих экранах все показывает но когда переключаю в режим видео то на экране стабилизатора нет изображения
I have the same kit, a7III. I connected everything the same as in the movie and I do not have an image on the live wiev of the gimbal. What may be the problem ?
Hi can you help me. I want to connect zhiyun master eye visual controller vc100 and my atoms ninja flame so I can record on the atoms in proves Thanks in advance Roy
Greetings to you! Can you advise me which controller and transmitter is better for my stabilizer to fully control the camera with the stabilizer remotely? I have a Zhiyun Weebill S stabilizer and a Sony A 6300 camera.
This controller will have very limited functionality with the a6300. It's designed to be used with the Weebill 2. It might be problematic to mount the transmitter on the Weebill S.
These remote functions depend on camera compatibility. We haven't been able to use these functions with our cameras. Still waiting on firmware updates to include our cameras.
i use this with my D7500 but it does not work with the gimball to give a live feed. iu know it is not a supported camera but the strange thing is that if i press the LUT option and press add SD card i will get a live transmission for about 2 seconds.... if anyone has anytips pls let me know!
I honestly don't know - I think you should contact Zhiyun and ask them directly (please report back so that we will all learn something after you get an answer).
Sony uses the multi USB cable, but depending on the model, the micro may work as well. Смотря, какая модель. Вообще - мульти, но микро тоже может работать. От этого зависят функции передачи команд камере.
Just to make sure - you have the transmitter unit hooked up to the gimbal and the camera connected to it right (it's a lot of cables - make sure they are all connected correctly). Did you update the firmware (we had all sorts of issues early on until we got it to work - Maybe Art can help)...
@@LensVid thanks for regard . icould fix it i used mistake cable . but i have another problem . when i press record bottom on gimbal /my gcamera start focous not recording . and when i moving control wheel on gimbal it doesnt work for nothin functaion/ plz help me if you can . thanks
Thanks for giving a simple explanation of in app tracking! Very helpful.
Cool Review Thanks, I'll let you know when I have Purchased my full kit with master eye. Hope most things work with GH5 Mark 2
Sure thing - I am sure more viewers will like to know if the camera control features work with Panasonic cameras (and how well they do so).
@@IddoGenuth Have you tested with a Panasonic GH series camera?
@@WayneRosa-Australia No, only Sony gear which is what you can see in the video.
Very nice review, does this support canon eos 90D along woth 18-135mm lens ? Please inform, your information will help me a lot. Thanks
Looking at the Zhiyun website (and some other dealers it seems to me that the company doesn't really want to support/make the MasterEye anymore. I don't know why since I think that this product was an amazing idea that needed some more work in terms of software. I also could not find a camera support list for you...
Important - first switch on the module, then the Gimbal. Or the weebill will turn off.
Do you think you could mount the mastereye to the gimble and use it as a conventional field monitor?
You might but it's big.
@@LensVid Ok Thanks
Nice review, can I still use the combo of video transmitter and master eye controller to control my camera recording without gimbal . I don’t want to buy a gimbal, just want to make sure the combo still works independently for live viewing and camera controlling. I just need to control start or stop recording remotely. And don’t want to use my phone to connect zhiyun wifi every time. Is that possible? Thanks in advance.
Would you try removing the cable between the gimbal and the transmitter, to see if the master eye controller is still capable of controlling some parameters of the camera? Let me know when you find out. Thanks very much!
I think that Art did test it without the gimbal and it worked but I am not 100% that you don't need the gimbal for some initial setting - I'll ask him.
you can connect to the video feed without the gimbal, but all of the camera control functions work through the gimbal only.
Is it possible to connect the remote controller to a bigger screen with clear hdmi so I wouldn't have to by something like hollywood 400s?
While its great it allows a tablet to connect to act as a control surface, a video only screen would also serve as a director screen with access to the controls screen password protected.
Nice review..!!!
Will the transmitter work in weebill S 1st gen..?
Thank you☺️
The MasterEye won't not sure about the transmitter.
Works with weebill s, 2 and 3 not weebill lab
Did you ever figure out how to get audio from the Master eye?
No. In general, this is an abandoned product. Which is very sad. I hope that something along these lines will be manufactured and supported by a different manufacturer in the future.
it does not work with the crane 2s transmitter that some with the pro kit...it has to be the version 3.0 / Ai transmitter?
Great review, will this work with the Crane 3s?
I am not 100% sure but I think it will only work with the newer Weebill 2.
Excellent video yet again
Здравствуйте , купил стабилизатор weebill 2 вместе с трансмиттер ли. Целый день мучаюсь, кабеля все правильно подключиль по инструкции. В режиме фото на обоих экранах все показывает но когда переключаю в режим видео то на экране стабилизатора нет изображения
How can i change the sensibility of the focus wheel? Can't find it in the menu, just in the gimbal thanks!
Does the same remote and transmitter also work on Weebill 3s?
I have the same question
you mean the zhiyun transmitter AI and VC100? yes, it's work on WEEBILL 3S
I have the same kit, a7III. I connected everything the same as in the movie and I do not have an image on the live wiev of the gimbal. What may be the problem ?
Are you sure the A7III is a supported camera?
Suport 4k?
no. only 1080p.
Hi can you help me.
I want to connect
zhiyun master eye visual controller vc100 and my atoms ninja flame so I can record on the atoms in proves
Thanks in advance
Roy
In what way do you want to do this? the vc100 has no HDMI out...
Greetings to you! Can you advise me which controller and transmitter is better for my stabilizer to fully control the camera with the stabilizer remotely? I have a Zhiyun Weebill S stabilizer and a Sony A 6300 camera.
This controller will have very limited functionality with the a6300. It's designed to be used with the Weebill 2. It might be problematic to mount the transmitter on the Weebill S.
@@LensVid What then can you advise for my Zhiyun Weebill S bundle and Sony A 6300? So that all the functionality is used.
@@Бася1210 I am not sure if there is such a solution. These old cameras are pretty limited.
@@IddoGenuth how about gh5 and a weebil s ? Is there enything else than the old transmitter ? I want to have a Focus puller
@@arf8314 I honestly don't know - we only use Sony cameras (A1/A7R IV and now the A7 IV) (:/
Did you manage to get shutter speed, iso and f stop to work remotely for the sony on the vc100 please?
These remote functions depend on camera compatibility. We haven't been able to use these functions with our cameras. Still waiting on firmware updates to include our cameras.
i use this with my D7500 but it does not work with the gimball to give a live feed. iu know it is not a supported camera but the strange thing is that if i press the LUT option and press add SD card i will get a live transmission for about 2 seconds.... if anyone has anytips pls let me know!
Does my transmount transmitter from the weebill s and the follow focus motor works (compitable) with the weebill 2?
I honestly don't know - I think you should contact Zhiyun and ask them directly (please report back so that we will all learn something after you get an answer).
Привет, а в камеру sony какой кабель нужен multi или просто micro USB?от трансмиттер в камеру
Sony uses the multi USB cable, but depending on the model, the micro may work as well. Смотря, какая модель. Вообще - мульти, но микро тоже может работать. От этого зависят функции передачи команд камере.
@@LensVid sony a6400
works with blackmagic pocket 4k?
we haven't tried it, but the manual says most of the features will work with the BMPCC 4k
hi plz help me . attach all cables but gimbal just writed conecting... and did not come video on my gimbal
Just to make sure - you have the transmitter unit hooked up to the gimbal and the camera connected to it right (it's a lot of cables - make sure they are all connected correctly). Did you update the firmware (we had all sorts of issues early on until we got it to work - Maybe Art can help)...
@@LensVid thanks for regard . icould fix it i used mistake cable . but i have another problem . when i press record bottom on gimbal /my gcamera start focous not recording . and when i moving control wheel on gimbal it doesnt work for nothin functaion/ plz help me if you can . thanks
the record button has a half-press focus function. A full press starts recording. For the control wheel, check the menu to configure it.
@@LensVid thanks a lot
My focus wheel on my master eye vc doesn't control my motor. Any ideas?
check if it's plugged into the right port. It's a bit confusing. Does this operation work from the gimbal?
@@LensVid yes it works from the gymble. And the VC100 works to just not the focus knob
have you tried if it works with the app?
4k support in transmiter and receiver
Are you saying or asking?
Nobody want that BS transmitter just give us a Bluetooth remote 😭😭