Giant Kent Buckles Making Process! Mass Manufacturing!
Вставка
- Опубліковано 17 гру 2023
- Inside the making of a marine Kent shackle(CC)
👁 Qingdao Anchor Chain Co., Ltd.
📞 +86-532-88537690
🏠 gb.qd-anchor-chain.com
__________________________________________
• Contact Us :satisfyingtech116@gmail.com
• Copyright ⓒ 2023. #Satisfying Tech# All rights reserved
#Kent Buckles # - Наука та технологія
Переводчик резинотехническое изделие номер 3
Amazing gaint buckels manufacturers
Сил у вас на него не хватит, поэтому делайте цепи и молчите в тряпку!
I never knew they came apart like that lol. Thats cool.
They don't all come apart, what you are used to seeing probably didn't come apart, these are special for connecting chains together or attaching an anchor.
Never knew these were assembled. Cause once done it doesn't really look like precession worked iron.
I would love if one these just showed up in the mail. Dropped off on my porch. One those scams where they send you a freebie then make a certified purchase account to make a great review of the object they send. This would be awesome. I would look at this thing every day. The beauty and craftsmanship that went in to it. The thoughtful engineering that went into it to make it fit perfectly, the struggling mail man carrying this in his mail bag to bring me my link. I know I am just dreaming but I would love one of these to admire. Its like looking at jewelry closeup as an ant.
Even individual parts are so heavy, lifting aid is required.... the finished parts are massive, strong, durable, and amazing.
Putin is King 🤴
Solid round! My favorite 🙄😒🙄
The video is just amazing, but the comment about putin deserves all my love! You are amazing~! Hi from a Ukrainian Floating Wind Engineer in Taiwan.
По развитию автора канала, виден уровень умственного развития всех американцев😂
По одной выборке судить о 330 миллионах? Лишь бы написать. Просто ты бот
Nice! Keep up the nice work.
Amazing video❤❤
Very impressive indeed!
Fascinante esse processo sempre fui entusiasta por correntes , tenho uma de trator enfeitando minha garagem
Es mucho el trabajo y un largo proceso para la fabricación de ésos eslabones..!! Pero estan bien hechos..!! Excelente video..!!
Good job
A real eye opener. Thanks
Too much left unexplained! What happened to the flashing after the forging happer? What was the hole drilled into it for? How did the links become a 'chain'?
These are lugless joining shackles.
The block that sits between the sides of the assembled link has a hole through it at an angle, and a steel taper-pin locks that block in place to keep the machined shackle halves together. The hole we see being drilled is oversized compared to the taper pin, because the pin goes in and is then locked in by a lead plug hammered into the larger hole on the side of the shackle.
The shackle will have that large hole on one side - for the lead plug, and a small hole on the opposite side. The taper-pin is hammered out by a punch inserted into the smaller hole. The larger U-shaped shackles we see suggest these are buoy link shackles, although they could also be for attaching anchors or for buttoning to trot moorings.
An anchor cable has multiples of these joining shackles, each one joins a length of chain, ironically called a 'shackle.'
One shackle of cable is 15 fathoms or 90 feet long.
Lugged shackles are the common links that are forged, bent into shape through the next link and welded closed, then the middle lug is welded in place.
Like I SAID! It wasn't explained or shown...
Now that's a chain link
Quá tuyệt vời 👍👍 Đúng là công nghệ 🌟🌟🌟🌟🌟🌟👏👏👏👏
I znowu chiny
the narration at 5:05 is very insightful
Only: it would be much too quick.
@@patverum9051I think the operator would be skilful enough to slow it way down.
@@patverum9051автор не понимает причин и следствий потому и пишет всякий шлак....Такая мелкая пакость не далёкого человека...
Лучше ЗЕЛЮ попрошаек никто не любит.Да каму из украинцев нужен у себя Израиль?Разве только тем кого купили или тем кто украинцем притворяется.Зеля ведь не украинец.
Very useful and innovative Excellent Greeting from Indonesian traditional gold prospecting 🇮🇩🌼🙏👍👍
Это скоба Кентера, а не Кента😂!!!
Different people, different tone skin, maybe different religions, but all forge workers have the serious face on with red hot metal.
It will burn to the bone
5:05 Really love the caption, they seems to like Putin very much, they even want to work with him.
Спасибо Мастерам Дела
자막에참 멋진말씀입니다 푸팅집어넣어 저프레스한방에보내면좋겠습니다
🤣🤣🤣
Проще и безопаснее вращять сверло а не огромное звено от цепи.
Exelente video 👍
Bee keeping is additive. I put to bed 60 hives this winter and god willing I double again this year.
Nice to see the PPE.
Boa maneira de acabar com a guerra😂😂😂😂😂 adorei
Надо тебя посадить на молот,чтобы херню всякую не думал ☝
Нельзя плохо думать о Великом Кормчем ))
Ему Путин в детстве вафлю дал , до сих пор щёки болят . 🤣🤣🤣 .
@@user-dv1rg7oq5r а тебе кто вафлю даёт? Тебе ещё пихать и пихать раз щеки твои не болят!😄😄😄
@@kotleta4634Who?
They guy wears basically house shoes and baggy clothes while he works on the CNC mill. Other than that it's nice to see they have lifting equipment everywhere.
面白い😊
Китайцы молодцы!
These are Kenter shackles, not Kent buckles.
Indeed you are correct!
How thick is that Floor, to withstand All that weight?🤔😯
Wow. The guy drilling the link or whatever it called not wearing safety glasses
Дизлайк за субтитры, пусть автор перевода думает почему. Видео отличное.
Anyone know what alloy they use? 4140? 4340? 1045? 440A?
High-strength steel probably G70/G80/G100 - There are various grades: G43, G63, G70, G80, G80, G100. "The steel is typically alloyed with other metals such as manganese, chromium, and nickel to increase its strength and durability." CM490 / CM690 / AISI 4140/4130/1018/1020/1045 / Q235B, Q345b, Ss400, Ck45, 4140, 42CrMo.
For high-tensile 4140 most likely, probably induction hardened, possibly carburized or some other surface treatment for marine salt-water use.
These parts are forged components, the rest of the chain is probably cast.
@@VenturiLife thank you. I was definitely not expecting that comprehensive of an answer. Great info, thanks again.
Лучше z
Es un eslabón con contrete. Hebilla es la de mi cinturon.
9:03 そっちが回るんかい!
i NEED that machine at (5:00). crush my pop / soup cans and SOO much more!!!😁🤣
How much $ for one of those complete links? All 3 parts? I am gonna guess over 1000$ USD
It wouldn't surprise me if they were $5000 each.
Пользовался такими скобами, я называю их автомат калашникова.
this place looks ancient. drilling with no coolant? what was the point of that drilling? i have never seen ship chain that is multiple pieces like this
Yeah I was surprised about that as well
That is because you don't understand the first thing about it...but you sound like a little kid talking!
Nearly every decent si zedship on the oceans with a stud link anchor chain will have Kenter Shackles like this to join the standard lengths of chain together. The drilled hole is to receive a lead plug which holds in a tapered pin. Not shown in this video though. The tapered pin will pass right through the shackle to hold the stud in place.
Is this in China or so. Korea
Kent always felt shackled down
For Men only.
I wouldn't stand anywhere near a slung load in this factory...... did you see the state of those slings? They must fail on a daily basis.
The Putin part almost killme Aahahahaaaaha.God Bless you😃
All the idiots want to get rid of using gas……..😂
reported.
Steel toe shoes would not make a difference
А может англосаксов
Did nobody tell them chains need to be links joined together? 🙄
If only you could understand...This is the link like a master link that links the shots of chain...
@@stevebell4906 I was kidding, I thought it was funny they never actually showed 2 of those being connected together.
@@Slash1066 Sorry sarcasm is hard to see...This is a new or improved version of the traditional ones which had more pieces and opened on only one side...These look stronger.But I have never seen a broken one ever...
@@stevebell4906 Just my dry British humour! They are amazing, never seen links made like this before
@@Slash1066 neither had I the ones I always have seen (Last time about 60 years ago) were very different.when opened were more like a letter "C" with the stud in the center of that C like in a capitol E all three of the open ends had a cut away like mushroom on their ends ....The shots of chain would both be hooked onto the C ends and two smaller pieces would be placed over the ends of the three open actions of the master link like a clam shell and a taper pin driven in with a sledge and a piece of rolled sheet led then hammered in on top of the taper pin....
It may be possible to find a video of the old type being made up?...or at least a series of stills in progression?
This new type looks to be forged and machined and locked with a in and lead plug it looks to be stronger ...But I never heard of the old style breaking, only chains breaking?
Fascinating,but we will regret this waste of energy one day
Чудове відео і чудові коментарі від автора✌️
Незалежники везде нагадят-от памперсов до ковки...
Автор мелкий пакостник....такие типы, пока ни кто невидит на заборах мелом члены рисуют.
Микола, тобi повiстка
없는 지식으로 자막 써넣느라고생했다 앞으론 하지마라 공부좀 몇년하고 그때되서 알꺼같으면 그때 자막넣어 지금은 니가 부끄럽다
Primitive work I feel bad for those guys !
Fell free to post YOUR video of your work...But you can't!....You sound just like a kid who has never done a thing in his life!
@stevebell4906 Well, Steve, I wasn't trying to put down their hard work ! What I was commenting on was the method and their conditions. For the record, I'm a retired steamfitter of 39yrs I will go out on a limb here trust me. I know what a hard day's work is !
@@grandpabill6684 Having both worked in a shipyard and sailed I can say that this chain would have to meet specifications for several reasons...First the ship and cargo are very valuable and insured ...and the seaworthiness of it are important to a lot of wealthy people ...That in itself would mean that a catastrophic failure of an anchor will involve massive ligation...As always happens...So unlike when we watch a video of guys repairing a truck in Pakistan...
In addition this is a massive modern factory...No one is going to take delivery of products or components without testing and certification...This is very different of the old days when a rusty old ship might sail and if it survived one voyage it might pay for itself...And the captain might be the sole owner...and the mixed crew might never get paid..
@@stevebell4906why do I not believe anything you say?
@@Underpar26 Hard to say?...Perhaps you are lacking real world experience and critical thinking skills?....And you are too lazy or lack the skills to look up and research the things that I have said?...
The world is full of people just like you...People who are immersed in paranoid persecution fantasies and conspiracy theories...People who don't want to believe science or math or history...People who just don't like proof or evidence...Or facts ...
But reality is not conditional on your acceptance of it...and I am not here to try to convince you that fire is hot or water wet...You have a right to be wrong!
Putin taki łańcuch nosi na szyi
5:05 ))
Gutes Video nur den Schwachsinn über Putin fand ich deplaziert.
Посадить туда байдена и иже с ним !
no veo videos de esclavos embozalados..
They missed a very important step which Harding the metal after it has been machined after all this it needs to be all heated ( moderate red) so it's not brittle and then dipped in oil no need for that silly paint bath they had all the steps right but missing a few this makes their product low quality I rate it as 65% if they add the other 2 steps they are missing then - also it pin needs to be tapered to hold better so they need a special tapered drill to do it and they did not show assembly and disassembly ???????
Those are forged, the heat treat is done at the same time.
The "paint" they are using is asphalt based, so it's like a bath of really heavy oils.
Yeah, they missed showing the drilling of the tapered pin that holds it together.
Какой ужас! И это японское экономическое чудо.
ПРОЦЕС ЗАМЕЧАТЕЛЬНЫЙ , НЕ ЯСНО ОДНО , ДЛЯ ЧЕГО БЫЛО ИЗГОТОВЛЕНО ОТВЕРСТИЕ .
КАКОВА ФУКНЦИЯ ЭТОГО НЕ ГЛУБОКОГО ОТВЕРСТИЯ !
НАМ С БРАТОМ , КАК СТАНОЧНИКАМ ЭТО ВЕСЬМА
😮😮😮😮😮😮😮😮 ЛЮБОПЫТНО 😊😊😊😊😊😊😊😊😊
УБЕДИТЕЛЬНАЯ ПРОСЬБА РАССКАЗАТЬ ОБ ОТВЕРСТИИ !!!!! 😢😢😢😢😢
Meg zelenszkijt!
Putin is a very bad man.
Not the way I make my kent buckles…just sayin.
What has Putin got to Do With this?
You're right! The fact that such machines are very effective in taking care of despots should speak for itself!
Then again, it's also kinda cute to say cause wether you're living in Asia, the States or Europe, we can all agree that Putin _is_ a giant a-hole.
Who would have known a short doc about Kent Shackles would unite mankind _as a side dish!_
Глупо сюда вмешивать политику
@@honderdzeventieni have no idea what are you talking, putin is great man and i would like him if he come cup of tea. ❤❤
Да он просто хотел сказать не Путин, а Байден 😂
I don't know
Я сообщил о Вас в ФСБ за слова оскорбляющие президента России
Putin is a bad man.
Because Russian never says anything offensing.
Snowflake,
Видео хорошее и познавательное.
Но фраза про Путина не совсем уместна...
Для чего надо было это писать в субтитрах?
Если разбираться кто больше виноват в этом конфликте, то это однозначно не Путин, а скорее Байден и его "шестёрки".
И, как минимум, при создании такого контента автору не стоит приплетать политику...
Для этого есть другие каналы и другие авторы, которые в этом разбираются лучше!!!
Putin is a very bad man.
The owner of this Factory should be branded with those hot chain links for how terrible this place is run
Os trabalhos no Paquistão sao piores😢😢😢
1930’s?
china PRIDE
Пиздеть про Путина не мешки таскать.😂😂😂
i suggest putting biden and usa geopolitics under the hammer. learn seeing and reading, monsieur
Причем здесь политика ? Однозначно больше не буду смотреть видео этого автора .
А Путин то причём он же не выступал в НАТО с Мексикой или Кубой, война закончится Когда Лондон даст отмашку😂😂😂
Забей, у переводчика перемога случилась
Про путина автор в точку сказал!
А ты не пробовал сам сюда сеть умник
А метал то из росии
Вот как надо убивать экономику других стран. Сделал брак, дал взятку чинуше, продал дешевле
Лучше z