See that shock bump stop put a second one on the inside of the shock on the shaft and it will stop the shock travel enough it will stop popping rod ends
+Aaron Jean Nice. Yeah for all around bashing 20T is too much and may develop heat and/or gear stripping issues. How's 18T with bashing temps and/or gear issues?
those 3.8 badlands are such small tires, which is probably why he hasn't had heat issues with it over geared a bit I love them tho, they are small and light, just a bit heavier than a racing tire which means little drivetrain strain and less strain on impacts, they make trucks harder to damage
Nice video. I wish you showed how to replace the 6 screws on the spur. The cush drive washer is a pain to line up and get the 6 screws in without messing up the cush alignment. I do not have much wrench time on the E-Revo. I stripped mine when a motor mount screw backed out. This helped me get it apart. Thanks.
Put the clutch on first then put the gear on. It makes it much easier then trying to install it all together. Also remove the esc and receiver tray also super easy👍🏻👍🏻
Thanks for the advice as I tried it that way and got things back together. I went with the metal 6447X spur. Can't go long without my E-Revo. My favorite R/C
I did the 20\46 gearing, it's fun but its for speed runs. I need tires that dont balloon as bad as the stock ones do. i cant keep it on the road with that much ballooning.. but I cant run this gearing on is grass like I would with the stock gearing. moter gets hot fast with 20/46.
Wife Withknife get a power hobby twin cooling fan it keeps mine cool but it’s stock but I still run it hard and I’m about to do this gear set up as well but I recommend that cooling fan
Good morning my friend😃. ...so i checked the manual. It's B (the middle slot) for a 17T pinion and A which is the slot furthest away for a 23T pinion. Those are the only 2 gears compatible with the adapter. Otherwise you have to remove it and just set the mesh manually like I did. Cheers! 🍻 (page 27 in your manual, basic tuning adjustments and you'll see)
Ezcuff1 thanks man. Yes I still have the same gears because sometimes I like watching it do speed runs in the street more than bashing. I would not recommend bashing with high gears, and yes in grass it'll overheat. When I jump or bash I use Kraton, on lower gear, shimmed diffs etc 😃....plus I don't have time to keep switching gears, I'm make a video soon of it speed running again, stay tuned brother👊👊💯🍻
@@tomtracks3007 how does overheating show? I run it 46/20T on grass right now because it has better traction and I have a powerfull german sheperd who outruns the stock gearing. But its 4°C Celsius so I don't think it will be a problem till march
Tom Tracks alright sweet man thanks for letting me know ima do it for sure now 🤘🏽 if ya ain’t frost your last man haha. And yeah man np us rc lovers gotta support one another n btw I subscribed to ya man keep it up
Michael King Yes I just realized that, sorry. But it's good to know some people actually care to hear my useless yapping lol. I'll have to edit and or re-watch before posting next time. Thanks for watching.
Watched everything twice as a guide to upgrade my 2.0 revo. The music is not necessary whatsoever. Thank you for taking time to make the video, but please leave music out of the equation.
HI mate...does this gear setup on the Erevo reduce the initial acceleration? i Know in theory it's suppose to but in real life???? Great vid by the way.
Cheers mate.... Have all the gears but was hesitating changing them for the acceleration issue. Will change them now after your reassuring comment! 👍👍👍
Hi man I mean to say I got a new E-Revo 2.0 I want to gear it up but I don't want to take out the a b and c set screw Mount there is any way I can do it
Ok haha. Well you can't because the preload mount only shows you certain gears. Check the instruction manual. If you want higher you have to remove it and just set it yourself like what i did. But the with the mount you can still go up a little, just can't remember, maybe like 2-3 teeth from the stock 15T. Cheers!
Rc Tycoons It was cool because I really didn't run it that hard this time around. But in another video that sucker got hot because I ran it all the way through a pack. Grass or thicker surfaces not recommended.
james palmer WOOOOOEEE boy you playing with fire with that question LOL! hmm i only have a version 2, but I'm going with the version 3 Kraton because it's already a close one with the EREVO slightly winning my favor due to the differentials, not to mention style points and wheelie capabilities. But Kraton V3 I think is magnificent with the new suspension set up and may be better. .
Tnt RC Monsta thank you so much brother i deeply appreciate it :-)..yeah I promised a few viewers some jump footage so this was the best I could do for now haha. Have a great evening!
Tom Tracks no problem bro you know I'm going to always support you my RC brother but that was a awesome beautiful little bash second you really did great it looks like you been jumping and flipping for a while 👍👍😁 keep them awesome videos coming my RC brother 💯👌👌👍👍👍
I just installed the TRA6449X metal spur gear onto my E-REVO 2.0 and I've maxed out the motor mount spacing.. it doesn't pass the paper test at all. I'm not sure if I did something wrong or if I bought the wrong spur gear, but it looks to be the same (just with more teeth). Does anyone know if there are any more adjustments that can be made between the spur gear and the motor's gear? Like I said, the motor is maxed out in spacing, I've pulled it as far back as I could. Any ideas?
Great video! Gear/ Pinion replacement guide starts at 3:33 for those of you that just want to get to the guide.
I bought this car a few weeks ago and I put in those gears and wow what a change. Love the music.
Thanks man i appreciate it! Have happy new years👊👊👍💯
Awesome and informative vid Tom. Thanks!
Rippey RC Thanks brother I appreciate it :-)
Thank you for that little idea I will go check it out man thanks
No problem man. Lmk if you have problems. I can always do a quick video to explain👍
See that shock bump stop put a second one on the inside of the shock on the shaft and it will stop the shock travel enough it will stop popping rod ends
Hmm good idea, thanks for that i appreciate it👍
I saw a guy do that in a video. It definitely will limit the suspension. Good way to go if you can’t get the straps
Man that thing is moving nice video bro!!
Troy Speed Rc Thank you my man Troy! You've been getting some sick angles with your Kraton. Have a great night bro :-)
Nice quick video. How has it held up are the temps fine with that gearing?
Yes on asphalt it's good and straight runs. But it'll definitely overheat on grass. Thanks for watching man! Much love to all you guys! ✌😁
Just changed my sour gear. You can change it without removing the esc.
Ezcuff1 Yah I realized that later on lol! My goofy self wasting extra steps for nothing. Thanks man! Have a great day!
U have a video on showing how to remove it wit out removing the esc
Yes I would like to to see that also. No room with ESC in the way.
Thank you very much! Great video.
I put 18/46 In mine with badlands 3.8 and it is sick. I used the older 3.8 not the mx series and it handles like a dream.
+Aaron Jean Nice. Yeah for all around bashing 20T is too much and may develop heat and/or gear stripping issues. How's 18T with bashing temps and/or gear issues?
Tom Tracks So far so good. Temps around 145 consistently, and metal gears are holding up fine. The revo is way easier to drive also.
those 3.8 badlands are such small tires, which is probably why he hasn't had heat issues with it over geared a bit
I love them tho, they are small and light, just a bit heavier than a racing tire which means little drivetrain strain and less strain on impacts, they make trucks harder to damage
Patrick Anderson Do you like them better than the mx38s/mx28s? It seems they are more narrow and lighter than the mx series ey?
Chris Watson mx38's are good too. I use them for bashing with stock gearing. Great bash tire for those big jumps
Did you had any terminal shutdown?
Nice video. I wish you showed how to replace the 6 screws on the spur. The cush drive washer is a pain to line up and get the 6 screws in without messing up the cush alignment. I do not have much wrench time on the E-Revo. I stripped mine when a motor mount screw backed out. This helped me get it apart. Thanks.
Put the clutch on first then put the gear on. It makes it much easier then trying to install it all together. Also remove the esc and receiver tray also super easy👍🏻👍🏻
Thanks for the advice as I tried it that way and got things back together. I went with the metal 6447X spur. Can't go long without my E-Revo. My favorite R/C
Good afternoon. I'm thinking of buying one of these two cars. Can you help pick one? Kraton v5 6s and the traxxas e-revo 2.0 6s? Pros and cons? thank
Jumps back flips that was so cool to see brother good one mate keep it up that will be a good upgrade for the erevo
APRO YT Thanks man, I appreciate you stopping by. The jumps were mainly for you bro ;-)
What's the biggest pinion gear I can run on stock spur gear?
Whatever fits really...also you have to consider thermal shutdown
So how was the temps?
I did the 20\46 gearing, it's fun but its for speed runs. I need tires that dont balloon as bad as the stock ones do. i cant keep it on the road with that much ballooning.. but I cant run this gearing on is grass like I would with the stock gearing. moter gets hot fast with 20/46.
Wife Withknife get a power hobby twin cooling fan it keeps mine cool but it’s stock but I still run it hard and I’m about to do this gear set up as well but I recommend that cooling fan
can the cush drive be installed on a summit 1/10?
Good morning man which three pinion gear works with the adapter on a 46 tooth spur
Good morning my friend😃. ...so i checked the manual. It's B (the middle slot) for a 17T pinion and A which is the slot furthest away for a 23T pinion. Those are the only 2 gears compatible with the adapter. Otherwise you have to remove it and just set the mesh manually like I did. Cheers! 🍻 (page 27 in your manual, basic tuning adjustments and you'll see)
Nice video but I would love to hear how car sound now couldn't hear it with the music
Yes I'm so sorry I'll do another video just for you....stay tuned my friend! 😃👍👍
Oh man you brought the big cans for some big time bash jumps. Nicely done brother that E-Revo mod is crazy fast. Cool video brotha 👍
Noeys FastRC thanks brother, I had too much fun today making this video :-)
Do you still have your erevo with same gears in? Does it get hot. Good video by the way.
Ezcuff1 thanks man. Yes I still have the same gears because sometimes I like watching it do speed runs in the street more than bashing. I would not recommend bashing with high gears, and yes in grass it'll overheat. When I jump or bash I use Kraton, on lower gear, shimmed diffs etc 😃....plus I don't have time to keep switching gears, I'm make a video soon of it speed running again, stay tuned brother👊👊💯🍻
@@tomtracks3007 how does overheating show? I run it 46/20T on grass right now because it has better traction and I have a powerfull german sheperd who outruns the stock gearing. But its 4°C Celsius so I don't think it will be a problem till march
Good morning y u to take out the preload mount
Thx. Good morning
Thanks for the info I was wondering if a 4274 motor will fit in this e Revo thinking of building one thanks ...
QuickDrawMcDraw 227 yah man np. Appreciate you even watching😊lmk if you get that EREVO built! It's a fun lil basher👍👍💯😎
Oh Dude. Now I can’t wait to put mine in
Wired RC you'll love it. So much faster; -)
Tom Tracks I’m going to do a little more bashing. But I’m going to put it in soon
Tom Tracks I would hate to strip it
Wired RC Yes, i wouldn't especially for any jumps to be on the safe side.
Tom Tracks its got so hot
your breaking the speed limit
Haha nice brother i love the choice words! 👊👊💯💪✌😎☝🔥
The rod ends will keep breaking I use zip ties to create a limiting strap and they no longer break!
gadgetmantwincities that's a great idea thank you for that👍👍💯
Where do you zip tie at
@@Jennamarie911 Check this video out for a better Idea... ua-cam.com/video/ZhJUVGkF-ic/v-deo.html
sir, you still having problem with the rod end ?
vuthina roeun nah its good now. Bought some extras👍
vuthina roeun Is it safe to go steal on them rods
Once again good nice video RC brother with good info 👊💪👍
My main man Kizzel Garrett Thank you so much brother :-)
Is it faster now??
Can we see some more running videos from you with this spur/pinion combination ? Thanks man and very cool videos with the e-revo thus far !!!
WarhawkLegend69 definitely, thanks for watching man.
Reasons for the ratio difference?
Hey man what speeds you hitting with this set up I’m bout to do it and was just wondering thanks man. And nice vids I watch them often 👍🏽
For sure my friend. It does 62mph with this set up. I appreciate the support. I got a new RC coming and should be back in the loop very soon!👊😎✌💯❤🙏
Tom Tracks alright sweet man thanks for letting me know ima do it for sure now 🤘🏽 if ya ain’t frost your last man haha. And yeah man np us rc lovers gotta support one another n btw I subscribed to ya man keep it up
Mine dose 63 with stock gears 6s
Really nice wow
Ronald Vann Thanks brother
You're welcome
Can't hear what you were saying over the load music.. besides that... it was a good video
Michael King Yes I just realized that, sorry. But it's good to know some people actually care to hear my useless yapping lol. I'll have to edit and or re-watch before posting next time. Thanks for watching.
Watched everything twice as a guide to upgrade my 2.0 revo. The music is not necessary whatsoever. Thank you for taking time to make the video, but please leave music out of the equation.
John Pruett yes sir you got it man. Thanks for watching :-)
yea just speak up or turn it down
HI mate...does this gear setup on the Erevo reduce the initial acceleration? i Know in theory it's suppose to but in real life???? Great vid by the way.
Yeah that's what i would think before, it's so slight you can't even notice...especially on this scale RC...
Cheers mate.... Have all the gears but was hesitating changing them for the acceleration issue. Will change them now after your reassuring comment! 👍👍👍
Thanks
Hi man I mean to say I got a new E-Revo 2.0 I want to gear it up but I don't want to take out the a b and c set screw Mount there is any way I can do it
Ok haha. Well you can't because the preload mount only shows you certain gears. Check the instruction manual. If you want higher you have to remove it and just set it yourself like what i did. But the with the mount you can still go up a little, just can't remember, maybe like 2-3 teeth from the stock 15T. Cheers!
I put the same gearing in and mind only hitting 29 but with stock I was hitting 35 I just got the car and don't know why I'm losing power??
That's odd. Maybe faulty?
Same here. I noticed this as well on mine. I had to purchase the 6447r tho and not the X. 😞. I might just back to default gears
That thing rips!
Chris Watson Thanks buddy :-)
Nice vid and now all you have to do is turn the music down so we can hear you and the vehicle clearer.
Thanks man I appreciate you watching! I've redone a few since the making of this without music at all! You should check them out👍😃
where did you get the gearing from ?
Traxxas.com
how was the motor temp after running these gears?
Rc Tycoons It was cool because I really didn't run it that hard this time around. But in another video that sucker got hot because I ran it all the way through a pack. Grass or thicker surfaces not recommended.
Revo 2.0 or Arrma Kraton v3 ?????
james palmer WOOOOOEEE boy you playing with fire with that question LOL! hmm i only have a version 2, but I'm going with the version 3 Kraton because it's already a close one with the EREVO slightly winning my favor due to the differentials, not to mention style points and wheelie capabilities. But Kraton V3 I think is magnificent with the new suspension set up and may be better. .
Thank you
Nice video! Love the music bro!
Thank you so much brother, your one of few who said they liked it LOL!! Much love my guy! Have a great week! 👊😎💪✌🔥💯❤🍻
Can i use 20/50 ?
Yes you must definitely can😊
@@tomtracks3007 thanks
What that's you Big Tom I can't believe it bro I freaking love it man you did awesome bro very informative and inspirational 💯👌👌👍👍👍👌👌👍
Tnt RC Monsta thank you so much brother i deeply appreciate it :-)..yeah I promised a few viewers some jump footage so this was the best I could do for now haha. Have a great evening!
Tom Tracks no problem bro you know I'm going to always support you my RC brother but that was a awesome beautiful little bash second you really did great it looks like you been jumping and flipping for a while 👍👍😁 keep them awesome videos coming my RC brother 💯👌👌👍👍👍
Tnt RC Monsta it's comments like this that make me go crazy with the run of RC videos and do what I do for my viewers. Thank you so much!
Use arrma Nero bigrock shocks
455 stage-1 thanks I'll give them a shot ✌
Great damn music man.
TheBruiser Thanks brother im glad someone appreciates it! It's memphis may fire😃
TRAXXAS E-REVO 2
No es un coche para estar todo el rato dando saltos. La mayoria de vídeos que he visto se acaban por roper los ejes de suspensión...
Nice video but cut the music next time bud
No problem 😃👍...thanks for watching
For that crack use shoo-goo
deekid 63 I have never tried that. Thank you do much for the advice man😃and for watching!
Tom Tracks no problem trying to help another rc brother out
Spur not sour. Lol
I love metal, 89% of time doesn't work for vids...
what that idiotic noise in the beginning of the video???
It wood be better without trash music
Just stop it. You ain't got hate rude boy. Thanks for watching though😃👍
Thumbs down for the extremely annoying music
Can't hear the words because of the stupid music.
Cmon dude learn some manners
I just installed the TRA6449X metal spur gear onto my E-REVO 2.0 and I've maxed out the motor mount spacing.. it doesn't pass the paper test at all. I'm not sure if I did something wrong or if I bought the wrong spur gear, but it looks to be the same (just with more teeth). Does anyone know if there are any more adjustments that can be made between the spur gear and the motor's gear? Like I said, the motor is maxed out in spacing, I've pulled it as far back as I could. Any ideas?
Need a Smaller pinion if it has more teeth than stock
Dremel tool can fix it😉