How to Perform Oil Change 11-17 Toyota Camry
Вставка
- Опубліковано 14 жов 2024
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/85/c/...
In the video, 1A Auto shows how to change the oil. The video is applicable to 11, 12, 13, 14, 15, 16, 17 Toyota Camry
This process should be similar on the following vehicles:
2012 Toyota Camry
2013 Toyota Camry
2014 Toyota Camry
2015 Toyota Camry
2016 Toyota Camry
2017 Toyota Camry
🔧 List of tools used:
• 14mm Wrench 1aau.to/ogm/1AX...
• 14mm Socket 1aau.to/ov4/1AX...
• Oil Filter Socket 1aau.to/ob/1AXA...
• Oil Filter Socket 1aau.to/ob/1AXA...
• 3/8 Inch Drive Ratchet 1aau.to/ov4/1AX...
• Socket Extensions 1aau.to/ov4/1AX...
• Torque Wrench 1aau.to/oou/1AX...
• Engine Oil
• Drain Pan 1aau.to/ocH/1AX...
• Floor Jack 1aau.to/ogR/1AX...
• Funnel 1aau.to/oak/1AX...
• Jack Stands 1aau.to/ogf/1AX...
Subscribe: / @1aauto
Check out our playlist:
Toyota Auto Repair Videos: • Toyota Auto Repair Videos
2011-2017 Toyota Camry 7th Gen: • 2012-2017 Toyota Camry...
For More Info visit us at 1aau.to/h/Jm/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
This was an excellent guide - the best part about this compared to other tutorials was the attention to detail in regards to the torque specs and the drain funnel. Lots of people on UA-cam skip both those steps.
+Bingo Bongo Thanks for checking us out!
Thank you for showing us how to change the oil. Your integrity regarding personal story of gas station attendance adding a quart of oil makes you a great person.
This is the third tutorial I watched to find out WTF the smaller O ring is for. WAY better than the others Great attention to the detail, no skipping over steps. I'm grateful you made it. Honestly thought I got the wrong filter (I did not).
Had recently bought my 2017 Camry and needed to do my first oil change. Glad I found this video. Great tutorial -- engaging and covered all the bases, with just the right tips and detail given (especially with changing the oil filter), so I knew what to expect throughout the whole process.
Fortunately, no excessive torque from a breaker bar was needed. 😀😄
I accidentally found this channel and I'm so glad i did. I have a 2012 camry le that just turned ove 90k miles, I'm the 2nd owner of it, i had to have the all 7 trans gears plus overdrive and torque converter changed out plus new trans fluid and filter..it runs great now. I want to keep this car bc it's a very good car and seeing this lady give instructions on how to keep up with the maintenance really has inspired me. Please keep up the great videos and you guys have gained a new fan, thank you!!
+Big G TV Thanks for watching! Don't forget to like and subscribe! 1aauto.com
Love how genuine yet helpful this girl was, thank you!
"And it's not because I'm a little Sally" haha best quote. Best guide on YT without a doubt.
About to change oil for 2.5L 2016 Camry... this video was more informative than oil change clips i've seen for my engine. Glad i watched! Sue, i thought honest mechanics were a fairy-tale lol! Great vid...i will remember it, and consider A-1 Auto for future needs. 😉👍
+Hristofor Lupescu Thanks for the feedback!
Young Lady, you just made my day. That is one of the most informative, comprehensive, basic maintenance tutorials I have ever seen. Thank you so much. Wish everyone else had your humility, presentation style and humor. Due to the current economy, I am now changing my wife's Camry oil and rotating her tires. What knucklehead designed that oil filter? Surely would be nice to have a spin-on/off style. Went and bought the special tool for the housing.
Great job; good presentation. I've done my own car maintenance for many years but still watch these when I buy my sons, my daughters, my wife or lastly-me, a different car mainly to get the details on tools needed, socket sized, fluid types and especially torque settings. I know all that stuff is in the owners manual but I've gotten lazy and find it much more pleasant to just watch experienced folks doing the job and paying attention to the detail.
Over tightening the drain plug and oil filter housing is exactly why I don't let other people change my oil or rotate my tires!
Same.. I figure I can do a better job on a vehicle I depend on than the shop "new guy" who spends his break time swiping left or right.
I like this lady. Very thorough and clear demonstration. Thank you
Best video I've found on this topic! The mechanic is great and explains everything clearly and completely. Thanks so much!
Wow, a TRUE professional! Thanks to a stupid service center (big chain store, don't care to share the name) failing to secure the under-carriage aero panel on my '14 Taurus SHO, it was damaged. When I decided to go back to performing my own oil changes, I was greeted with over-tightened fasteners, just as you showed in this video. This is typical of stupid shops that turn out services as quick as possible. The "techs" could care less about possibly stripping oil pans, etc. Thanks for the info...
ArcadeDude44, this is the precise reason why I went back to doing my own oil changes. Nobody cares for your vehicle like you do.
By far the best tutorial I’ve seen. Very professional. I can tell that you’re strong because you were flexing that 3/8” drive ratchet! 💪🏼💪🏼💪🏼💪🏼
+Heeman5 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Recently bought a 2017 Camry and this video is very informative. Instructions are clear and easy to understand. Very good job.
Excellent work. It’s nice to see someone actually do it right for a change. I’d lube the O-rings completely before installing them though.
Thank you so much for the detailed tutorial. I could never open my camry's oil drain part for the drain plastic pipe and had to skip and open the entire oil filter part. Now I know it's overtightened and need the right tools. Also mystery solved where that little o-ring is supposed to go. LOL
This is by far the BEST oil change video 🙏 THANK YOU SOOOOOO MUCH!
Yep, my new crush! Well done!
+fa de Thanks for checking us out!
Good video! You're the first one I've heard mention about the tricks of the old days. I remembered they'd pull my dad's dipstick and show him how it was a qrt low and want to add another qrt. Course he always told them no he'd take care of it. He showed me the next morning that that the level was right where it was supposed to be.
Best oil change video on the net. Thank you
I've been working on cars since the early 90's and this canister filter is the worst and only type that I've had leak after an oil change. The aluminum cap leaks and is too easy to break off. You have none of those extra parts with a traditional oil filter. Great instructional video.
What a SUPER informative video!! Well done, young lady, Well done! I viewed other videos on this subject, (A WASTE OF MY TIME!!) and this gal gave ALL the needed information!! All of it! Thank You, A1! You have SUPERBLY PROFESSIONAL people doing the job!!
+ronald kondler Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
That was a great video I do mine every 4to 5000 mile I really like your honesty about them checking your old while it was running it sad there ppl out always finding a way to take your money smh.keep up the good work thanks
+Albert Guzman Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
this is the best guide for a Toyota by far. thank you for taking the time to explain this. just easily changed the oil on my brothers Camry because I was informed so well by this video
Great video. I'm just wondering why Toyota would do this type of housing for the oil filter. Regular oil filters have their own metal housing. So is it to save metal?
It makes it harder for regular Joe blow to do his own changes, Toyota Hope's you will just pay them to do it
Epitome of environmental conciousness. My 2010 prius housing cap was plastic and an overtightening maniac could easily crack those
You are awesome! I am going to use this video as a guide since I just bought a 2015 Toyota Camry XSE.
Always love watching this lady she the best fr 💯
+Jonathan Thomason Thanks for the feedback!
I just did the oil change for my dad camry. I panicked when you said 6.4 quarts. Then realized that was for the v6 😅
this is the best video. i was wondering what that plastic thingy was
Great video, thank you, you are awesome 😎
Can you add some oil into the filter housing to prevent a dry start when you start the car? I've always done it on other cars with a a regular filter. This is my first time using this filter housing thing.
This a great Video. You are organized. I have saw some others that well not for me. It is 2022 and oil changes are $89.00 at the dealer. I am looking to get some of the tools. Well being a senior getting down is easy. Getting up is hard. lol
Very nice video. I was amazed that the tech was able to get the plastic drain plug on the canister with one hand. It is a bear to overcome the canister's inside spring, but I'm thinking with the vehicle raised on a lift one gets more arm power to push it in than just having the vehicle on jack stands. The otherinnovative way to get it on is using two thumbs; one on either side to equalize the pressure. Great istructions and video work.
Looks like some bozo used an air gun on the drain pan plug lol, great tutorial by the way.....
+David Marotta Thanks for the feedback!
This is a kickass badass young lady. I hope her company treats her well.
Excellent demonstration thanks again
I have a camry exactly like this. Even with the over torque on the plug and filter it seems every metal surface bonds on these Toyotas. Brake rotors, rims to hub, rear hub to the dust shield etc etc....
Good video but my only criticism is your use of very long ratchet extensions. While that is fine IF you exert NO pressure to the sides, with that long an extension, I believe you can easily round out the top sides of the soft aluminum of the filter housing drain plug...and you can see how chewed up it already is @12:03!! My rule is to use as short an extension as possible when dealing with an aluminum or other soft metal. And, really, generally, since if the extension is cocked, then some of your torque becomes pressure going sideways rather than rotational.
Excellent job, thanks for sharing this video
Should you replace the drain plug gasket every oil change?
Any tips for people at home with limited accesibility to extra tools to make it easier when some bozo puts the drain plug and oil filter cap on with way too much force?
1/2in breaker bar
so on the drain plug torque.....I got some bad info and failed to cross check...I installed the plug at ~18 ft lbs (using a beam torque wrench), on doing more searching, I see that it should be 30....think this things gonna fall out before I can get to it to retighten in a few days?
Very good video, thanks!!
Which oil brand toyota prefers works with high mileage 130k miles. 2012 Camry V6?
Nice job,
Just noticed they put the small Oring underneath the filter from inside, that's why I do my own oil change for 7 years now
Question: is this multi-component design superior to the traditional canned oil filter?
Great tutorial and explanation. Appreciate the torque specs 18, 9 & 30 foot pounds. Where could i find a new crush washer if it missing on the drain plug? What is recommended size of the washer /gasket?
Amazon. Any autoparts store will have the appropriate drain plug as well. They would be able to find the right size or you can search it online.
Good video, but how is one suppose to handle the filter bra (1567937011 - CLIP, OIL FILTER BRA - Toyota) ? Is it suppose to spring back or was I suppose to bend it back after changing?
I had the same issue when I couldn’t remove the oil filter using a ordinary Rachet. I had to quickly go to home deport to get torque wrench to to remove it 😅
Why not put links to the Toyota parts being used like the oil filter and tool to take it off.
Love your honesty
shes is so badass
Thank you for sharing. best of the best guide.
+Siden Veal Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Good Video. The very quick look I could see of the old oil filter, looks like a TRD Oil filter which is Toyota Racing Development which is OEM in my book. I use the TRD Oil filter on my 2010 Camry. Also the old oil filter could be Amsoil, since Toyota TRD oil filter and Amsoil cartridge oil filters resembles each other.
+BOSS Thanks for the feedback!
Cuestion, can washed with regular water them and putting back or I have dry first dry them???
Awesome job 👏🏼
Good show 🎉
one i had the plug for the filter drain was so tight on it loses the top part so i just screwed the whole unit off- messy with the oil drain of it. but what else could i do? so i just put a new filter and screwed it back on. you did not cover this if this happens and it does.
Great video!
+Btm Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
An Excellent Video. there is one thing worse than Tight-Tighter!
Great video! Thank you soo much!
+Juan Patino Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
Help me the oil filter cap is over tightened when I took it to Toyota how do I get it off? I tried tightening the oil filter cap by itself isolating the oil filter drain but still can’t get it off and I really don’t want to take it to them again??
Probably a little late now. But you need a breaker bar, or even a metal pipe that can fit on the wrench so you have some leverage. The more leverage the easier it is to get it off
Having a hard time removing that oil filter drain plug. What's the technique?
Use a 3/8 breaker bar with a 14mm deep socket
great video
Great video, thank you!
Very good. Thanks.
Thank you
Awesome video
to loosen up the oil filter is to turn left? never seen that oil filter before
Great Job. Thank you very much
+TJ Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Why can't I get the filter nut off? My whole filter turns with it!
Looks like the metal clip that is supposed to hold the whole filter from rotating was squished. I'll need an extra set of hands next time I change the oil. The metal clip above the oil filter housing prevents it from rotating while you loosening the the filter nut.
You are amazing!👍
Fantastic. Thanks so much!
Hercules must have worked at one of those quick lube places...I remember that one ad where the guy looks at the stream of oil leaving the shop down to the street and goes "bummer"..
..
Torque specs.
Drain plug: 30ft lbs
Oil filter housing: 12.5ft lbs
Who the hell did that oil change before?
Captain America?
I see the small o ring attached to the used filter when you took it out (7:00). However, no small o ring attached to the new filter when you install it.
I really don't know what is the function of the small o ring.
What? Did you actually watch the entire video? She clearly lubricates and installs both rubber O rings. The function of the smaller O ring is to seal the smaller drain hole cover on the filter housing. You know so oil doesn't leak out of it🙄. What is so hard to understand about that?
The smaller o-ring was incorrectly installed by another person. It should be installed as she did.
Good job
what was the brake fluid brand you used to clean filter housing?
She was using brake cleaner, not brake fluid.
Excuse me, what is the torque for the thing and the filter cover please
You are a dope. She blatantly says every torque for each item in the video. You have your fingers in your ears the entire time? Ffs
Just realized when I took my filter off it didnt even have the smaller gasket (first oil change on it)
Than you
FAQ; how much oil stuck at engine even after draining the engine oil?
How many liters of oil does a small car require?
+Muhammed Moin Uddin If you have a 4 cylinder camry then it will be 5 quarts and the 6 cylinder will need 6 quarts.
I would check the owner's manual to be sure.
4.732 liters = 5 quarts. 5.67812 Liters = 6 quarts.
Wouldn't it be nice if all repair shops too the time to actually clean off the oil soaked parts like she did with Brakleen and wipe them down, etc. Truth is, almost none would do it that way because they take so many short cuts. Sometimes their poor work results in additional problems during or after their own work, which they will happily take your money to fix.
Thanks for that last bit of info. Another reason to not trust jiffy lube and the other guys.
+Blood Angel Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
THSTS INSANE, WHO PUTS THOSE ON THAT TIGHT
The person tightening down all the necessary areas for the oil change is definitely NOT a man, it was a manBOY!!! 😂 😆 😝 excellent video … I hope the driver of this vehicle sees this video… insane
Oh that indeed made me laugh out loud. Cheers, bet that was over 80 lbs ft.
Brake kleen on the oil filter housing is something i have never done in my life.
How to reset maintenance soon on the dash
+Polo Lauren Thanks for checking us out! While each vehicle may be slightly different in this process, you can try the following:
Insert your key in the ignition and turn it to position one
Push and hold the odometer button on your dash and then turn your key to position two
Keep holding the odometer button for about 10 seconds or so
The maintenance light should start to flash and there may be a beeping sound
Then the light should turn off
After the maintenance light goes off release the odometer button and then start your car
This should shut the light off
If it’s still on, repeat this process once or twice more
Really hate it people over torque everything especially God knows they even heard of torque wrench or torque specs. I had muscle strain in my chests changing my sister's tyre... A tyre! One car, we had to get guy from tyre shop too. He bought a pipe as extension to take out the lug nuts. I'm not sure my local toyota sc did a pretty job when getting alignment done gone bad, hate it when some transport agency praise toyota like they did everything good.
64 x 14 mm oil wrench socket .....you're welcome!
Wow I've never seen a plug in that tight
Please what's size of this tool? 05:00
3:23 Think someone used impact wrench on oil pan nut.
Not sure I can design a more complicated way to change oil. Love Toyota but Geez!! VW / Merc is on top of engine correct way up so no mess and easy. 🙄. My old 2005 4Runner V8 is easy. This is nuts.
+Mark T Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c