Installation - Metal Tech Swing-Out Bumper on Lexus GX470
Вставка
- Опубліковано 29 сер 2024
- This video takes you through the step by step installation of the Metal Tech 4x4 rear swing-out bumper (Pegasus) on your Lexus GX470. This overland bumper comes with everything you need to install it on your offroad truck. Contact Metal Tech 4x4 for more information on their rear swing out bumper, code name Pegasus, for the Lexus GX470.
music:
La chambre blanche
by cuicuitte (feat renoncule) / comme ça
licensed under a CC0 1.0 Universal License.
SlingShot
The Humps
Licensed by agreement with artist www.looperman.c...
Looks like I found the swing out bumper I've been looking for. Great instructional video and awesome turnout. It looks great!
Thanks 👍
Thank you guys for being one of the pioneers for us gx guys and gals!
Glad to be a part of your overland adventure.
I would like to see this type of video for the front bumpers MetalTech has for the GX470 as well.
Easily the most menacing soundtrack for a bumper installation. 😱
ha... hard to find good royalty free background music :-)
Wow, this is so much better than the factory instructions for removing the rear bumper. I've put off doing a bumper repair all summer because the factory instructions aren''t clear. Thank you so much for making the video! It's a beautiful day today and you make this look easy, so I'm going to go and do it now. :)
thanks for the kind words... Glad it helped
1:15 To grease your bearing place grease in the palm of your hand roll the bearing into the grease watch for grease pushing through the bearing, roll the bearing, and repeat.
What the heck is that sound in the background???? Great install vehicle. Annoying background music.
It sounds like the passenger needs to buckle their seatbelt the whole time. Terrible tune choice.
Can't wait to start building one out, thanks for helping us get familiar with this vehicle!
Thanks for the note
What does sick unimaginative music have to do with a Lexus GX470 bumper. Remix! Otherwise great video.
Great video. Wish the fj cruiser bumper opens the same way as the gx bumper. Then you can use the door and swing out as a work area/kitchen
Beautiful it’s just very pricey $2800 but I’m definitely going to get it
April 26, 2002 the price $3687.95 for this bumper can’t believe the price jump
@@popsthemachine247wait what??? Lol
I think I'd actually pack the swing arm bearings with grease, not just rub it on. Great vid though😎👍
Good call!
Nice! Good job👍
Thank you! Cheers!
Great video -- will likely buy one of your bumpers when I pick up a 470. However, your packed the bearing incorrectly for the rear swing arm. Since it's not for a wheel, may not be a big deal, but for the picky out there, this might stand out.
thanks for the note. send a pick of your truck... love seeing them transition.
I like that bumper! Nice vid.
Robert DeMilo thx for the note and really glad you like the video.
Is there a reason that the bearing wasn't properly filled with grease like a front wheel bearing pack?
Where can I buy that
OMG badass!!!!!!!
it is an impressive bumper. thanks for the note.
Nice job guys 👍👍
So issue is grease 😂
By the way how much it’s cost ?
thank you for the note and the kind words. Check with Metal Tech on the price. It has been awhile since we published this how to video and I'm sure things have changed :-)
What brand and size of lift are you running on the Lexus ? Also size of tire ? Looks like a great rear bumper. I just purchased one if these vehicles and am looking to outfit it in a similar way
Sorry I can't give you too many specifics since this is not our truck. The owner can be found over on IH8MUD in the J120 forum. The tires are 35" and I believe he runs an ICON lift. Check out IH8MUD/J120 and you will find lots of mod ideas for your GX470.
the bumper isnt bolted to the frame anywhere, its just held on by the clamp force of those 8 bolts and a couple of plates?
Two bolts on each side pass through the frame rail. Four grade 8 bolts in total should be sufficient for a decent tug off of a rock.
From where can I buy that?
I hope for help.
What kind of gas do people run on the Lexus? I'm guessing premium high octane gas is hard to get in some remote places?
Toyota calls for premium in the GX470. You're right though it can be tough to find in remote locations. Octane boost can help when only regular is available.
2003 GX takes regular. Possibly 2004.
I think these look very nice, but I'm worried about the added weight to the vehicle and the detrimental effect this might have on handling. The gx is already top heavy, now it seems like this, with the tire and fuel, might add 400lbs to the upper back.
you are dead on to be worried about adding weight... one of my pet peeves is adding tons of weight that doesn't provide value. Metal Tech 4x4 spends a lot of CAD time engineering their bumpers to ensure they have weight where it is needed and reduce weight where they can. You should give them a call to find out more about how they keep the weight on this bumper to as low as possible while still providing the protection you want for your truck.
How do I get same kit??
Will this work with an existing trailer hitch?
Thanks for the note. Please check with Metal Tech 4x4 and let us know. They have all the specific data and latest configurations available.
How is the gas mileage after?
with the V8 the bumper doesn't really move the needle... the lift and bigger tires are the pain point for MPG on the GX.
It was shit before and it will be shit after. 500k reliability is worth it though.
Hi friend how are you?
I need more informations about this bumber. I have land cruiser prado fj120.
Thanks for the note. Give Metal Tech 4x4 a call or email them. They can give you all the info you want.
Nice job looks like you guys from Oregon can you please tell me the address I have Land Cruiser I would like to come and check bumper for my car
Thanks for the note. Give Metal Tech 4x4 a call (www.metaltech4x4.com/) They performed the install. Their "contact us" page has a number of ways to reach them including phone, address and email form. They should be able to take care of you. They are definitely Land Cruiser nuts and have a wealth of information about them.
How much do you sell your metal bumper ?
We don’t sell anything…. head over to Metal Tech to see their bumpers.
@@lastgreatroadtrip Alright...
Any idea of what this bumper weighs?
Cheers
heavy :-) check Metal Tech 4x4's website it should have the details.
@@lastgreatroadtrip A whopping 184 LBS. That's more than me.
haha... Steel is heavier than flesh and bones... and takes an impact better :-)
Music is extremely annoying but great video. Sounds like a first nations peyote dance.
that's a little harsh :-) ... but I hear you.
Does this fit a Prado 120
Give Metal Tech 4x4 a call and they can verify that for you. Thanks for checking.
Do they make one for the 460?
check out their website. They make both a front and rear bumper for the GX460
Last Great Road Trip excellent video. I wonder how different the installation would be on a 2012 GX460.
That music is completely wrong for this video. Better leave it out next time
thx
Where did you learn how to pack bearings totally wrong
For that much money I would not want to put my bumper together.. super lame
I understand that... However, even on Toyota/Lexus tolerances are bigger than you would think. By assembling and being able to make adjustments you get a custom look for your individual truck.
I came to the comments to see how many comments were on the poor quality voice over, and the lack of grease on that packing job.