GX470 Goblin Bumper installation
Вставка
- Опубліковано 13 вер 2024
- Learn how to install Metal Tech 4x4's Goblin Bumper on your GX470 in this step by step tutorial. The Goblin Bumper is one of our most popular products for a good reason...it looks clean AF. This bumper is designed for simple installation that can completed from the comfort of your home, with maneuverability/adjustability built into the design. The bumper is sold in 3 different stages depending upon the package you are looking for and varying based upon the number of add-ons. All of our products, including our Goblin Bumper, are made in-house by our skilled set of welders.
Product Link: metaltech4x4.c...
#GX470 #GoblinBumper #MetalTech
Love it... Keep up the install videos
Thanks! Will do!
another GREAT video!!!!
Thanks again!
🔥🔥🔥
Cleaannn😮💨🔥
Whyyy ! 12mm and then 1/2” ? Good video, and well done, lots of detail.
the 12mm was the original hole that was threaded - the 1/2" was drilled bigger to accept the new 1/2' bolt
These are awesome! Do you folks have a recommended list of winches that can be used , Im hoping a winch with a 12,000LB capacity can be used . Thanks again!
We recommend a 9.5k lbs or a 10k lbs winch with synthetic lines. The ComeUp Seal 9.5 SLIM is in one of our GX470s. As for others with different winch manufacturers we are testing a Warn EVO 10s for fit. Most winches do require the solenoid pack to be remote mounted under the hood, but that is good for the winch in the long run. As for 12k winches most do not have bigger motors, they are just a 9.5k winch geared lower so they have the higher "rating". This is not always a good thing since line speed in a recovery can be an issue. Also a proper 12k winch will have thicker line, thus less feet of line on the winch drum, also not always ideal. Know that a 9.5 or 10k winch can be doubled back with a snatch block to slow speed recovery but almost 2x the pulling power. All of our trucks can run any winch but everyone has a 9.5 or 10k on them for speed.
Can I install this bumper and retain factory suspension?
Yes you can if its just the bumper. If you put a winch in it, that will add another 75-90lbs and at that point you should up the front springs.
Don’t be lazy. Use spray primer and two coats of paint. That polish will fall off after two weeks
Lazy is doing nothing at all. But to do it right, you need to do full panel removal, acid dip, neutralization process, soda blast, primer, paint, blend the area to color match, and top coat. Or one can also use the nail polish trick that, in this case, two years later, is still on the truck. It comes down to the available time the installer has to put into it. But laziness is doing nothing and, unfortunately, is the most common.
Your grift game is off. The video needs to at least makes sense. Channel that inner sell out in you. Maybe you too can be the male version of Candice Owens.