GREAT JOB SIR, I HAVE A FEW GENERATORS AT HOME TWO OF WHICH I AM ABOUT TO REPAIR AS SOON AS THE NEW PARTS ARRIVE. BECAUSE I LIKE IN THE SCOTTISH COUNTRYSIDE, WE SOMETIMES HAVE POWER OUTAGES. MY MAIN GENERATOR WHICH IS A 4 STROKE PROVES VERY VALUABLE IN KEEPING US UP AND RUNNING. THANKS FOR SHARING YOUR KNOWLEDGE WITH THE WORLD. MUCH LOVE AND LIGHT TO YOU DEAR FRIEND. PAUL
Nice video sir, One safety precaution thou is when testing the spark plug of starting coil, ensure the area is dry from fuel, cause one spark can ignite fire. One of your biggest fan sir
If yours has a bit more hours / mileage on yours than the video above, I suggest removing your muffler and checking the exhaust port for clogging due to soot in the port. Mine started but maintained very low rpm. Yes i had the capacitor problem too, first. Move to 450w capacitor. Mine has been in service for over 12 years.
Great video man, thank you. Hey man, I've got a Ryobi 950W 2 stroke generator, it starts but it won't stay running. Might you have any idea as to what the problem might be?
I just change the crank shaft completely since then my gen is not working well any longer...if it work for some minute, it will stop again, and I will start and it won't work, what could be the problem please...or is it the crank shaft I change, or can I go and fix the connecting rod for the old one and fix that
Pls sir... can AVR be d problem of thermocool oga 6900ES, 1) sometime d light go off & on after some hours of work, 2) if using it to pump water d Generator will start shaking & d pump machine is 1.5hp
Please, if anyone can see this, i really need help completing my training, am an apprentice i was learning about this generator, how to repair, i don't need money, i just need mentor, someone to help me so i finish the training please 😢😢😢😢😢😢
GREAT JOB SIR, I HAVE A FEW GENERATORS AT HOME TWO OF WHICH I AM ABOUT TO REPAIR AS SOON AS THE NEW PARTS ARRIVE. BECAUSE I LIKE IN THE SCOTTISH COUNTRYSIDE, WE SOMETIMES HAVE POWER OUTAGES. MY MAIN GENERATOR WHICH IS A 4 STROKE PROVES VERY VALUABLE IN KEEPING US UP AND RUNNING. THANKS FOR SHARING YOUR KNOWLEDGE WITH THE WORLD. MUCH LOVE AND LIGHT TO YOU DEAR FRIEND. PAUL
Paul my Friend,I always get excited reading your comments... Thanks
Wow
This is terrific
I never imagined the fault would be from such a tiny little thing as oil seal
Wow
Thank you sir for sharing
You are welcome
Thanks for watching
Nice video sir,
One safety precaution thou is when testing the spark plug of starting coil, ensure the area is dry from fuel, cause one spark can ignite fire.
One of your biggest fan sir
You are very correct sir...thanks a lot
If yours has a bit more hours / mileage on yours than the video above, I suggest removing your muffler and checking the exhaust port for clogging due to soot in the port. Mine started but maintained very low rpm. Yes i had the capacitor problem too, first. Move to 450w capacitor. Mine has been in service for over 12 years.
Shawwnn
Thanks for this
My own Gen looks like it doesn't have pressure each time I draw it, I have checked the both Oil seal and its intact what do you think
It could be the rings are broken
Great job sir, at least expenses on generator will reduce
Exactly
That's the Aim
Thanks for watching
How to clock pasting and rings
Please make vdo on generator wiring in detail. Thanks 👍
Alright
Great job, thank u
Please could you help me figure out my tiger generator don't start
Great video man, thank you. Hey man, I've got a Ryobi 950W 2 stroke generator, it starts but it won't stay running. Might you have any idea as to what the problem might be?
Check your carburetor
That could b the fault
Thank you for this! My tiger generator brings a lot of oil! How do I fix that?
Where does the oil come from
I just change the crank shaft completely since then my gen is not working well any longer...if it work for some minute, it will stop again, and I will start and it won't work, what could be the problem please...or is it the crank shaft I change, or can I go and fix the connecting rod for the old one and fix that
good job. thank you for the lovely lecture
You are most welcome
Very great I was following
Good job sir pls keep the good work on
After checking all these issues and fixing a new oil seal, is there a possibility for the gen to not turn on?
Of course
A lot can still make a gen not work
What is the jop of the magnets behind the flywheel?
The magnets provides the magnetising force needed to produce spark from the plug
Great job u are doing sir 💪✌️
Thank you
Pls sir... can AVR be d problem of thermocool oga 6900ES, 1) sometime d light go off & on after some hours of work, 2) if using it to pump water d Generator will start shaking & d pump machine is 1.5hp
Have u changed d Avr already
Can a broken flywheel key in two stroke generator make it not to start?
It's still supplying spark on the plug....I don't know what to do
Yes
Try another flywheel
My small tiger generator crank and start but cut off again,
What is after all those things that you showed us and the gen did not start.
Well covered.
Im subbing and look forward to seeing more.
Thanks for the sub G
What about fuel? Has any mixture in it?
The mixture is quite relative
Kindly help on how to clean this portable generator caporatur sir
Oh
We will shoot videos on carburetor soon
Well done sir
You are welcome
My tiger generator brings out a lot of smoke. What can I do to reduce that issue
Could be as a result of the type of engine oil u use
@@bencoinstitute I use zico engine oil
and the right quantity
The position is bad sir
Adjust speed on generator YAMAHA ET1
Mostly it may be the 2in1coil
True there
Good evening we don't work 🛠️🔨🔧⚒️
Awesome
Thank you
The plug, the oil seal and the carburettor are okay, I'm really confused
Has it started now?
@@bencoinstitute yes boss, it started when I replaced the flywheel.
Thanks for your time boss❤️
Please, if anyone can see this, i really need help completing my training, am an apprentice i was learning about this generator, how to repair, i don't need money, i just need mentor, someone to help me so i finish the training please 😢😢😢😢😢😢
Oh
Your words melted me
How do we go about this
What happened to your previous training
❤❤