Restoration EINHELL Generator Mini | Restore Portable Generator EINHELL

Поділитися
Вставка
  • Опубліковано 5 бер 2021
  • Dear Mr/Ms
    Thank you very much for your value time to Watch,Like,Comment,Share and Subscribe our videos on The Restoration Channel, and we will try all our best to find more idea as try to Create more videos to make your assist and more facilities.
    If you have any idea or more convenience to support us please don't hesitate to contact with us ! i apologize for the mistake if I made this recovery!!!
  • Наука та технологія

КОМЕНТАРІ • 73

  • @randymartin3856
    @randymartin3856 11 місяців тому +42

    We have used the ua-cam.com/users/postUgkxOTeIs0vv4_9B5hsmnLsk9r930uDQLu_Y for probably 30 hours with our camper and it’s been great! The noise level is really only noticeable when running the AC and other appliances like the microwave, hair dryer, or coffee pot. It’s not huge like other ones and it has wheels so even at 90lbs, I can move it!

  • @Patrick4959
    @Patrick4959 3 роки тому +6

    awesome restoration job and probably not everyone,s idea on it but at least those out there who use a piston and ring compressor tool and even a primer on the paint job will be able to do this one for sure cheers from Australia mate

  • @davidstrohm5918
    @davidstrohm5918 3 роки тому +6

    If only all of us old people could be redtored! As always great job!

  • @tabnisabeni7240
    @tabnisabeni7240 Місяць тому

    Mantaaaap ,,lanjutkan dr Sukadiri Tangerang Banten

  • @kkrankie
    @kkrankie 2 роки тому +2

    Me: carefully measures 1 ounce of 2 stroke oil to a pre measured gallon of gasoline…
    Him: splashes unknown amount of gas in the tank, and squirts whatever oil is in the oil can… starts right up and has no problem….
    Good work!

  • @andrewmcfarland57
    @andrewmcfarland57 3 роки тому +2

    Im impressed you rewound the rotor. Excellent work!

  • @michaelmurray3422
    @michaelmurray3422 3 роки тому +1

    Great job!! Looks very good again. Keep up the good work.
    Mike from the U.S. - Washington State.

  • @paulfellows2094
    @paulfellows2094 Рік тому +1

    fantastic another back to life great job

  • @hectorquinones4824
    @hectorquinones4824 3 роки тому +1

    Great job kid. Love ur work. To me u are my number 1. YES SIRRRRRRRR

  • @marvik777
    @marvik777 3 роки тому +3

    молодец отличная работа.Лайк за видео

  • @user-xu1kp1yv3z
    @user-xu1kp1yv3z 2 роки тому +1

    모터수리까지 와우 ^^

  • @StefanDembowski
    @StefanDembowski 3 роки тому +2

    Very cool. It looks better than brand new. 👏👏👏

  • @spooktasticaparanormal
    @spooktasticaparanormal 2 роки тому +1

    Fabulous restoration video. I've just subscribed.

  • @MegaRajeewa
    @MegaRajeewa 2 роки тому +1

    nice editing

  • @minorsituation1363
    @minorsituation1363 3 роки тому +2

    Brilliant meticulous fantastic work.

  • @anatolynord7781
    @anatolynord7781 3 роки тому +3

    отлично,палец вверх,удачи.

  • @elanvaz7
    @elanvaz7 2 роки тому +1

    Superb job bro. Extraordinary.

  • @eka5454
    @eka5454 3 роки тому +3

    Great man i'm from indonesia 👍

  • @eduardoalfredosimonetti7931
    @eduardoalfredosimonetti7931 3 роки тому +1

    Muy buen video saludos abrazo grande desde Argentina

  • @RESTORATIONOFSCRAPMETAL
    @RESTORATIONOFSCRAPMETAL 3 роки тому +1

    Nice generator and nice job 👍

  • @joshwhyte9074
    @joshwhyte9074 3 роки тому +2

    Health and safety won't approve of the footwear ahha, great video!

  • @abuelitojuke8595
    @abuelitojuke8595 2 роки тому +1

    Excelente restauración y muy bien realizado , te felicito amigo ! ! , Un saludo ! ! .

    • @alimudin6532
      @alimudin6532 9 місяців тому

      Djdjidhdudhuddhdidhfifj

    • @alimudin6532
      @alimudin6532 9 місяців тому

      😂😢😅😢😮😊rjrjrjeorhjrhrhrhrjrjtgjuhrjjrkrjgyhjhjhhjijrjfjrjtjtjtkvjnnrfghhhhhgghhhmjhjjjjh

  • @robertobezerra8376
    @robertobezerra8376 3 роки тому +3

    Adóro éssas séries lindos trabalhos parabéns.

  • @amilcarmoncada1801
    @amilcarmoncada1801 3 роки тому +1

    Excelnte restauracion de este generador portátil EINHELL, desde Venezuela mis respetos y saludos💯🤘🤘👍👍👍🙏🙏

  • @wilsonbell3516
    @wilsonbell3516 3 роки тому +7

    Не так хорошо как кажется , как обычно не заменил поршневую , подшипники и после перемотки надо балансировать якорь а так красиво покрасил а главное работает .

    • @klim1554
      @klim1554 3 роки тому +2

      Всё как всегда, в конце другая модель может быть.

    • @klim1554
      @klim1554 3 роки тому +2

      Кто помнит модели двигателя: Д1-Д8
      Примитив (и при этом так просто не запустишь) хоть толкая, хоть пидали крутя.

    • @Dim_ca
      @Dim_ca 3 роки тому +1

      @@klim1554 с языка снял !!! Помню покупаешь все новое с прокладками и тд и то хрен заведется а тут на коленке из говна и палок собрал и заработало :))))

  • @--josman--
    @--josman-- 3 роки тому +1

    buen trabajo... saludos desde España

  • @christiannoetzold2956
    @christiannoetzold2956 3 роки тому +6

    Sorry Mr. Cleaner das ist ihr Name nicht Restaurator wenn man nicht einmal die einfachsten Teile wechselt (Kugellager etc.) was ist dann bitte restauriert????für mich einfach nur gereinigt und neu bemalt

  • @Mr109off
    @Mr109off 2 роки тому +2

    Hello. Watched very carefully the entire restoration. Still noticed that you maybe intentionately ommitted to show some important steps: installing and adjusting the governor, adjusting the carburetor, those thing that make the generator run smooth and output correct voltage. Anyway it is not a tutorial just a show.. Thanks

  • @richarddawson7584
    @richarddawson7584 3 роки тому +1

    Great job 👍

  • @klim1554
    @klim1554 3 роки тому +4

    Иногда на новой технике не открутить гайку. А тут всё как помаслу!

  • @RestorationVS
    @RestorationVS 3 роки тому +1

    Good Brother 👍

  • @sergiusricardo3275
    @sergiusricardo3275 3 роки тому +2

    Good work 👍🏻

  • @restorationmt6286
    @restorationmt6286 3 роки тому +1

    Restoration Generatior good

  • @Megadronte
    @Megadronte 3 роки тому +1

    Schöne talentierte Restoration

  • @bogdanmihail4494
    @bogdanmihail4494 2 роки тому +1

    I have pne of this but it didn t start. When i put some gas directly in the carburator, it start easy. What it is the problem whit IT?

  • @jonnelpagas6262
    @jonnelpagas6262 Рік тому +2

    What size is the magnetic wire use to rewind rotor

  • @joetrujillo6027
    @joetrujillo6027 3 роки тому +1

    Great job

  • @bertbeijkLibido
    @bertbeijkLibido 3 роки тому +1

    Mooi hoor 🤩🤑

  • @pcfnokia273
    @pcfnokia273 3 роки тому +1

    OK thanks

  • @user-vj3fb5ee1y
    @user-vj3fb5ee1y 3 роки тому +1

    👍

  • @user-fj9yd4ws8i
    @user-fj9yd4ws8i 3 роки тому +1

    Бровко молодец

  • @cbsn6711
    @cbsn6711 3 роки тому +2

    это капиталка а не рестоврация .алеша ты виточки посчитал на якоре

  • @husnulkhuluq5947
    @husnulkhuluq5947 3 роки тому +2

    Restorasien diesel kubota 😁

  • @LauraRodriguez-bs8eu
    @LauraRodriguez-bs8eu 2 роки тому +1

    Genial

  • @EngDrewman
    @EngDrewman 3 роки тому +1

    Given the low price point of these generators (Harbor Freight Tailgator), not really sure it's truly worth all the work, especially rewinding the rotor, but still interesting to watch.

    • @geoffquickfall8424
      @geoffquickfall8424 3 роки тому +1

      That is of course, if you live in a first world country. This is exactly what you would do in a third world country. Sort of like your grandfather and great grandfather on the farm back in the 30’s! 👍 good job.

    • @andrewmcfarland57
      @andrewmcfarland57 3 роки тому

      Exactly. In the first world, everything is disposable. Why would they sell a cheap, 100-year reliable diesel generator when they can sell us 10 of these crappy things at ten times the total margin... I love to watch third-worlders do this; first world consumer revenge fantasy :-)

  • @YoandyRosario
    @YoandyRosario 2 місяці тому

    Hola buenos noches saludos desde Cuba quisiera saber cuántas vueltas le dió a las bobinas del generador.

  • @bladi-senpai9398
    @bladi-senpai9398 3 роки тому +2

    Dude disassemble me and restore my life too 😢

  • @elcanaldelasolucion.paratu7847
    @elcanaldelasolucion.paratu7847 2 роки тому +1

    Le hago una pregunta
    A dónde se encuentran
    Los imanes de eso generador
    Arroz tiempo

  • @TV-gh7ug
    @TV-gh7ug 3 роки тому +2

    New bearing come on

  • @marv.mon.9845
    @marv.mon.9845 3 роки тому +1

    This is literally exactly the same as the harbor freight tailgator

  • @duiang5801
    @duiang5801 2 роки тому +1

    🇱🇰✅☝️

  • @user-ib9lc6bz9c
    @user-ib9lc6bz9c 9 місяців тому

    SALAM TERPUJILAH SALAM.❤.

  • @juliosolisaragon5108
    @juliosolisaragon5108 Рік тому +1

    wie viele windungen hat der rotor

  • @goncalomorgado511
    @goncalomorgado511 3 роки тому +1

    what liquid do you use to clean the machine components?

    • @abeerfadl6484
      @abeerfadl6484 3 роки тому

      ar.m.wikipedia.org/wiki/%D9%85%D9%84%D9%81:ACDelco_logo.svg

  • @elcanaldelasolucion.paratu7847
    @elcanaldelasolucion.paratu7847 2 роки тому +1

    Una pregunta amigo
    Porque se quema la bobina
    De los generadores
    Y queda una buena

    • @elcanaldelasolucion.paratu7847
      @elcanaldelasolucion.paratu7847 2 роки тому

      Todavía espero
      Las pregunta
      Porque se quema
      La bobina del generador
      Y cuáles son los imanes
      Que yo no lo conozco

  • @user-dr2rd3oc9z
    @user-dr2rd3oc9z 3 роки тому +1

    пипец даже обмотку перемотал...думаеш будет работать?

  • @bangnguyendinh8540
    @bangnguyendinh8540 9 місяців тому

    Việt nam à

  • @tangoalpha8381
    @tangoalpha8381 Рік тому

    🏆🏆🏆🇧🇷🇧🇷🇧🇷👍👍👍

  • @user-ve9ym5kk8x
    @user-ve9ym5kk8x Рік тому +1

    ну хули то нет крашеный алюминий !!!🤣

  • @sdm6751
    @sdm6751 Рік тому +1

    Hola tengo un generador de 2 tiempos como ese pequeño de 800w y no veo tapón de aceite de cigueñal. No lleva? Gracias

  • @chriscraft9681
    @chriscraft9681 3 роки тому +1

    👍