As a professional painter and owner of a painting company I can say I laughed at every hack in this video. Not one thing in this video is something painters do.
Agree! At least they’re worth a chuckle! 😂 The first rule of cutting-in is…you don’t cut-in with the brush, you cut-in with the paint. (For those who don’t understand that statement it means that you let the paint flow about 1/8 of an inch off the bristles to the cut-in line)
Professional painter with 20+ years experience here. While I do commend these “hacks” for inventiveness, and maybe worth doing if your supplies are limited (like trimming a chip brush to be an angled brush, or improvising an extension pole) these are not tricks I have ever used (or seen used) on a job. I guess tin foil would work in a pinch if you didn’t have any cutting skills or tape, and you were masking out a large area to be sprayed….but really, if one just practices cutting in with a 2-2.5” angled brush for a while, your jobs will get much easier. It’s not knowledge you’re born with, anyone can get at least decent at cutting in with some practice. Here’s a Pro Tip for the viewers at home for cleaning brushes: try to keep your brush from drying out. Wrap it in plastic or a wet rag if you don’t have a bucket of water (or solvent) to swish it in. When you are ready to clean it at the end of a job, use dish soap and a wire brush to work out all the paint. As long as the paint didn’t dry up inside the brush, you should be able to get most of it out, extending the life of your brush. Here ends the lesson. 😎👌
Trust me folks. Professional painters hide none of these things from you. Mostly because we don't use them. All you need is a high quality brush (the right one for the right job), and practice. Gimmicks are more trouble than they are worth.
I thought that one was actually pretty decent. There are alot of raised, oddly shaped surfaces that I can see folding foil around easier to apply (and remove) than tape.
As an amateur painter, I found myself not laughing at the tips, but the way you made the video, it's great! I still tape to get those nice lines, but the coke bottle over the can, I'm definitely going to try it. I used the silicone and denatured alcohol trick once, it actually worked!
When I paint around a doorway frame, a window frame or a thermostat box etc. I always tap the tips of the brush bristles over the section I just painted so to hide the lines or streaks that you can get in an area that is painted with long strokes. When you lightly tap the tips of the brush over those long paint strokes it breaks the paint lines up and blends that area's surface into the wall. 👍
А первом случае,по видео - можно просто снять лицевую панель регулятора (она снимается быстро и это будет менее затратно чем защитная фольга)и прокрас получится лучше !! Во втором видео я делаю заминание буртика к стенке банки(того который держит крышку) сектором (примерно 45 градусов) - для того чтоб"до капельки"слить краску из банки. И даже если сливаете краску частями,потом она будет сливаться обратно(со стенки пластика) в банку через замятый буртик (когда поставите вертикально),и не будет растекаться по буртику и там накапливаться...
That’s why all rollers handles have threads at the bottom of handles. To add a stick, some short, some long. It has never been a secret, trick or so called hacks nowadays. The only trick I can tell you if you need your whole house painted outside, $6k-9k costs nowadays. You can paint yourself at $400-800 total costs including materials. 3 to 5 days of your life will save you $281 an hour @$9k painter job. That’s an equivalent of $380 an hour before taxes if you make yourself that at your job.
Brushes I have seen come already shaped. Rollers are sold with extension poles. There are Fullels and pour spouts for various sized paint cans, Although the idea of a cap looks interesting.
В целом хорошие советы, кроме фольги, выключатель лучше просто снять, а стену можно разграничить, приложив большой шпатель и не надо подрезать кисточку.
There are some really good ideas demonstrated here and I can’t wait to try them out when I paint the interior of my house next month. Thanks for for this helpful info. 👏👏👏👏👏👏👏
Pouring paint, or any liquid, from a can - just use your stirring stick; stand the stick in the receiving can at an angle of about 15 degrees to the vertical and run the paint down the stick, you won't get any spillage or dripping - this works, for example, pouring coffee or tea from a pot with a badly designed spout, just run the liquid over a spoon held nearly vertical in the cup.
I dont know how i have ever coped, painting my house for 20 plus years without knowing these tips lol.. Ive been wasting time washing my brush by hand when i could have got my drill out and and found a screw to drill in to spin my brush for me. Why take 2 mins washing when this will take me 4 mins to set up lol.. And not to mention instead of not over loading my brush with paint i could just put a cup lid on my brush to catch and waste all my paint. Good job lol..
You should have just took off the cover off switch, use painters tape for some edges, some turpentine or paint thinner would help clean the brushes better too.
Removing that plastic cover before painting and putting it back after would take seconds, much faster than messing up with the foil, cheaper, and would guarantee better quality.
Im a professional painter and if i didnt have any tape i could see how aluminum foil could come in handy..Even tho i could see somebody using these ideas its all about the experience and the brush you use..even the paint .painters have been doing things a certain way and thats just how it is...But like i said if you were at home and didnt have access to certain materials then yea these hacks would work!!
Розетки и выключатели можно снять за полминуты, дольше обматывать фольгой будешь, мытьё кисточки... ну, если краска на растворителе, то проще выбросить, растворитель нонче дорогой, а на водной основе и так прекрасно вымоется, зачем такие сложности, подводку я бы стала делать хорошей мягкой кисточкой, незачем большую кисть портить.
Да уж... Знаете канал «Доктор Дью»? Вот он там от души издевается над подобными «знатоками» и «изобретателями». Я и обратил внимание на это видео, что Доктор Дью показывал фрагмент, как ещё один такой портит кисточку.
@@qasmb1546 🤣🤣🤣 Let me guess, you're a painter and you must use tape, wear sandles, got a man bun, and wear black latex gloves so not to get paint on you freshly manicured fingernails.
@@ChrisC-fr8yu I use tape, don't wear sandles, don't have a man bun. wear gloves. Most importantly get a better finish in a quicker time than someone like you.
@@ChrisC-fr8yu And Fyi I'm not just a painter. I think that's why I'm open to tricks which make the job easier and quicker, i.e using tape. Your type remind me of them old heads who swear they would never use a drill because "real builders don't use drills". All die out in the end.
Profesyonel bir usta olarak 1. Tüyo- Maskeleme bandı kullanabilirdiniz. 2- Tüyo- Herkeste sıcak hava tabancası olmaz. Bence vakit kaybı bu uğraş. 3-Tüyo- Fırçayı kenardan kesmeniz usta için gerek yok. Biz hiç bir zaman fırça kesmiyoruz. Amatörler için belki uygun olabilir. 4- Fırçayı kenardan sarı plastik bir aparatla boya yaparken bu da gereksizdir. Fırçayı kullanan amatör biriyse maskeleme bandını tavsiye ederim.
En vez de usar aluminio, es mejor comprar cinta adhesiva de pintar o carpintero; en vez de un palo de escoba compren un extensor, dura toda la vida si lo cuidas. Con ser cuidadoso no volcas la pintura. Para limpiar el pincel aguarras o algún solvente y sale fácil. Para hacer líneas perfectas si no tienes buen pulso usa un pincel más chico y fino y además encinta la otra pared. Te quedan perfectas las líneas. Lo más importante acá no se vé. Antes de trabajar empapela y pone un nylon grande en el piso para no manchar nada. Y ese rodillo que uso sobre la columna hay que evitarlos. Busquen rodillos antigoteo. Abrazo grande.
Even WITH the brush cut at an angle it still looks bad 😅 he just didn't reach it all the way up to the ceiling, these hacks would take more time to execute than to just be skillful at painting
Just saw this. If your plastic bottle "trick" isn't complete air tight on your expensive can of paint, you just wasted your money on the paint. And you cutting in with that flat brush....you're not even doing it right to begin with so that's why you got your overlap. Buy a quality angled brush and save yourself the time from cutting. It's amazing how some people are going to try these and they "tricks" will fail.
Акриловым герметиком, аккуратненько. Кисточкой обезпыливаете, наносите, прям в трещину, герметик, удаляете излишки, что испачкали вытираете влажной губкой. Это, если они действительно мелкие.
И ещё к совету Константина Мережко - Вам надо предварительно попробовать это место(с трещинами)поковырять(без усердия) Дело в том,что там где эти места заделывались и где появились трещины - может быть строителями сделано халтурно. И трещинки могут быть на"корочке"из замазки которой они свою халтуру закрыли. Если Вы просто замажете трещинки,то потом(в случае халтурной основы)эти трещинки начнут"множится"и даже это место может выпасть куском. Если же всё хорошо и место с трещинками крепкое до сделайте как Вам посоветовал Константин М.
@@ОльгаФилимонова-д7з Я бы лучше немного поковырял. Серьёзно говорю, опыт показывает, что если слишком надеяться, что всё будет хорошо, общие затраты сил и материала будут больше, чем если всё зачистить с самого начала - то, о чём говорит Эмиль Золя, вполне реальная проблема.
Painters hide from you? Seriously like hiding the hair clipper from you? LoL or that you can use a broom handle on a roller? Cutting the tinfoil is something I never considered. I would just use painters tape. If I was using foil, I'd just use the already straight edge.
As a professional painter and owner of a painting company I can say I laughed at every hack in this video. Not one thing in this video is something painters do.
Yea but he's a professional finger wagger
Yes, as the son of a gun, these hacks are total amateur hour. Any pro that cannot cut in is not worth it.
True but such videos gets lots of views and views = $$$$$$
I concur. Hilarious!
Agree! At least they’re worth a chuckle! 😂 The first rule of cutting-in is…you don’t cut-in with the brush, you cut-in with the paint. (For those who don’t understand that statement it means that you let the paint flow about 1/8 of an inch off the bristles to the cut-in line)
Professional painter with 20+ years experience here. While I do commend these “hacks” for inventiveness, and maybe worth doing if your supplies are limited (like trimming a chip brush to be an angled brush, or improvising an extension pole) these are not tricks I have ever used (or seen used) on a job. I guess tin foil would work in a pinch if you didn’t have any cutting skills or tape, and you were masking out a large area to be sprayed….but really, if one just practices cutting in with a 2-2.5” angled brush for a while, your jobs will get much easier. It’s not knowledge you’re born with, anyone can get at least decent at cutting in with some practice.
Here’s a Pro Tip for the viewers at home for cleaning brushes: try to keep your brush from drying out. Wrap it in plastic or a wet rag if you don’t have a bucket of water (or solvent) to swish it in. When you are ready to clean it at the end of a job, use dish soap and a wire brush to work out all the paint. As long as the paint didn’t dry up inside the brush, you should be able to get most of it out, extending the life of your brush.
Here ends the lesson. 😎👌
one year in and i can cut a very straight line. every single time
Trust me folks. Professional painters hide none of these things from you. Mostly because we don't use them. All you need is a high quality brush (the right one for the right job), and practice. Gimmicks are more trouble than they are worth.
Tweakers up all night again :)
I hate painting but love the edging I’m great at it. Like you said all in the brush .
@@belle190 It's called "cutting in".
Just take the outlet off the wall - don't wrap electrically conducting material around it :(
To be fair, that looks like a low-voltage volume control, not an outlet.
Or, just use blue painters tap.
masking tape??
I thought that one was actually pretty decent. There are alot of raised, oddly shaped surfaces that I can see folding foil around easier to apply (and remove) than tape.
@@kano8 Tape is also cheaper than foil.
My favorite painting trick is throwing out the brushes after each use.
Mines the disappearing of paint from a can when the boss leaves in the summer....dig a hole n pour..Hey boss where outta paint calling it a day😂
Por 3so lo del refran: El desperdició de los rico, es beneficioso para el pobre,😅..
用什么也没的！
me too 😂😂
LOL
Softgle are perfect for both professionals and DIY enthusiasts. I love that they prioritize comfort and protection.
As an amateur painter, I found myself not laughing at the tips, but the way you made the video, it's great! I still tape to get those nice lines, but the coke bottle over the can, I'm definitely going to try it.
I used the silicone and denatured alcohol trick once, it actually worked!
What a load of bull this is. As a time served decorator, I can confirm painters and decorators don't do the crap in this video.
When I paint around a doorway frame, a window frame or a thermostat box etc. I always tap the tips of the brush bristles over the section I just painted so to hide the lines or streaks that you can get in an area that is painted with long strokes. When you lightly tap the tips of the brush over those long paint strokes it breaks the paint lines up and blends that area's surface into the wall. 👍
Fun tips! Those brushes are pretty rough though 😬. A good brush and the right masking tape for the job will set you up for success.
The right tools for the right job
Til the paint goes underneath the tape,..learn to cut with a purdy angle brush
All and any tips for all projects can be taken or not taken...
Tips have helped me many times over the years. Ty
Any painter who is any good does not need any of these ideas. Never seen a professional need anything except his brushes
...and a rag, lol
@@ggggloveking9419 lots of rags 🤣🤣
А первом случае,по видео - можно просто снять лицевую панель регулятора (она снимается быстро и это будет менее затратно чем защитная фольга)и прокрас получится лучше !!
Во втором видео я делаю заминание буртика к стенке банки(того который держит крышку) сектором (примерно 45 градусов) - для того чтоб"до капельки"слить краску из банки. И даже если сливаете краску частями,потом она будет сливаться обратно(со стенки пластика) в банку через замятый буртик (когда поставите вертикально),и не будет растекаться по буртику и там накапливаться...
Ну что, 250 полуляхов из 250?
The fingers say it all ...........Loved it
Stick in the roller is brilliant! For 8 years I could not guess such a simple solution))
That’s why all rollers handles have threads at the bottom of handles. To add a stick, some short, some long.
It has never been a secret, trick or so called hacks nowadays.
The only trick I can tell you if you need your whole house painted outside, $6k-9k costs nowadays.
You can paint yourself at $400-800 total costs including materials.
3 to 5 days of your life will save you $281 an hour @$9k painter job.
That’s an equivalent of $380 an hour before taxes if you make yourself that at your job.
Brushes I have seen come already shaped. Rollers are sold with extension poles. There are Fullels and pour spouts for various sized paint cans, Although the idea of a cap looks interesting.
В целом хорошие советы, кроме фольги, выключатель лучше просто снять, а стену можно разграничить, приложив большой шпатель и не надо подрезать кисточку.
There are some really good ideas demonstrated here and I can’t wait to try them out when I paint the interior of my house next month. Thanks for for this helpful info. 👏👏👏👏👏👏👏
Thanks for the video as I will be decorating soon and these tips are very helpful.
When he shaved the paintbrush with the hair clippers that shit was hilarious
You know that those switch plates just pop off right 😂
I'm also painter but ur trick is for beginners 😊😊😊
No! Those tricks are not for beginners, they are for morons.
There for people who want to get fired
@@thomasmorano7779 except for the foil one. That’s for people who want to die.
Thanks.This trics will useful to me,when I paint home.
Thx a lot 4 ur efforts, painting tapes and roller sticks might have been around 4 some time though
Pouring paint, or any liquid, from a can - just use your stirring stick; stand the stick in the receiving can at an angle of about 15 degrees to the vertical and run the paint down the stick, you won't get any spillage or dripping - this works, for example, pouring coffee or tea from a pot with a badly designed spout, just run the liquid over a spoon held nearly vertical in the cup.
Kreatif dan menginspirasi. Salam satu hobi sukses selalu menyertai
Totally agree, hilarious ideas
Wow!! Quick awesome tips!! 🤯
I dont know how i have ever coped, painting my house for 20 plus years without knowing these tips lol.. Ive been wasting time washing my brush by hand when i could have got my drill out and and found a screw to drill in to spin my brush for me. Why take 2 mins washing when this will take me 4 mins to set up lol.. And not to mention instead of not over loading my brush with paint i could just put a cup lid on my brush to catch and waste all my paint. Good job lol..
oh you just save me so much money on 2 hacks. thank you... !
You should have just took off the cover off switch, use painters tape for some edges, some turpentine or paint thinner would help clean the brushes better too.
I am not sure if this guy is trolling with the video or what. But they dont seem to know how painters do things.
Soap n warm water
If you are a real professional you don’t need these tricks
Any brush you ave could do the job as well
Terima kasih sudah berbagi ilmunya kawan..
Kitchen foil around an electrical socket or lightswitch??? There's a wonderful cheap invention called masking tape...
Removing that plastic cover before painting and putting it back after would take seconds, much faster than messing up with the foil, cheaper, and would guarantee better quality.
I can cut a around a switch plate without painting it.
Use painter's tape.
Ben 27 yıldır boya ustasıyım,bunların yaptıklarını çoktan unuttuk. Daha çok bilmediklerimiz var😉
Im a professional painter and if i didnt have any tape i could see how aluminum foil could come in handy..Even tho i could see somebody using these ideas its all about the experience and the brush you use..even the paint .painters have been doing things a certain way and thats just how it is...But like i said if you were at home and didnt have access to certain materials then yea these hacks would work!!
Большинство из этих лайфхаков вам заменит обычная малярная лента на тех участках, которые не нужно красить.
Это ролик для идиоьов...
Thanks for sharing these great tips!👊🏼👍🏼🇳🇱
Thank you for you video sir
I’ve been in construction since the’70’s and have never seen anyone use ANY of these “tips.”
its because theyre only available at some mental facility where people are retarded
Спасибо, за технику и дельные советы. 👍👍
Use masking or painters tape for many applications..
Plumbers won't tell these secret tricks because they don't use these tricks.
Helpful video
God job bro very nice
Get a proper paint brush set, not one in a discount store and you’ll never have to mask again 👍
Everything except the pole was harder work
Use the side of the brush to cut in trim not the flat side of brush , steady hand and there is no need to wrap.
He can't paint,,,
Розетки и выключатели можно снять за полминуты, дольше обматывать фольгой будешь, мытьё кисточки... ну, если краска на растворителе, то проще выбросить, растворитель нонче дорогой, а на водной основе и так прекрасно вымоется, зачем такие сложности, подводку я бы стала делать хорошей мягкой кисточкой, незачем большую кисть портить.
Да уж... Знаете канал «Доктор Дью»? Вот он там от души издевается над подобными «знатоками» и «изобретателями». Я и обратил внимание на это видео, что Доктор Дью показывал фрагмент, как ещё один такой портит кисточку.
Us Pro painters does not need tape, aluminum foil or any other "hacks".
Yep bro haha
yes we do.
@@qasmb1546 🤣🤣🤣
Let me guess, you're a painter and you must use tape, wear sandles, got a man bun, and wear black latex gloves so not to get paint on you freshly manicured fingernails.
@@ChrisC-fr8yu I use tape, don't wear sandles, don't have a man bun.
wear gloves.
Most importantly get a better finish in a quicker time than someone like you.
@@ChrisC-fr8yu And Fyi I'm not just a painter. I think that's why I'm open to tricks which make the job easier and quicker, i.e using tape.
Your type remind me of them old heads who swear they would never use a drill because "real builders don't use drills".
All die out in the end.
Good ideas
Very nice and beautiful
Ich bin maler beruflich. Paar tips sind gut für hooby maler , für uns auf der baustelle wörde eus die tips zu viel zeit kosten.
Profesyonel bir usta olarak 1. Tüyo- Maskeleme bandı kullanabilirdiniz. 2- Tüyo- Herkeste sıcak hava tabancası olmaz. Bence vakit kaybı bu uğraş. 3-Tüyo- Fırçayı kenardan kesmeniz usta için gerek yok. Biz hiç bir zaman fırça kesmiyoruz. Amatörler için belki uygun olabilir. 4- Fırçayı kenardan sarı plastik bir aparatla boya yaparken bu da gereksizdir. Fırçayı kullanan amatör biriyse maskeleme bandını tavsiye ederim.
Very nice tricks. Can't hardly wait to paint my daughter's room pink as she requested, in our new house real soon!
THANKS YOU GOODNESS 🌟 DAPHNE COTTON ALWAYS 💜
teknik ngecatnya sangat mantul, berbagai trik jitu
GREAT!!! MAN
Excellent 👍🙏
Good work
Que sensacional, dicas maravilhosas.
Pls demonstrating b4 to the on field
Fantastic tips. Give me more!!!
Good job my friend 👍
En vez de usar aluminio, es mejor comprar cinta adhesiva de pintar o carpintero; en vez de un palo de escoba compren un extensor, dura toda la vida si lo cuidas. Con ser cuidadoso no volcas la pintura. Para limpiar el pincel aguarras o algún solvente y sale fácil. Para hacer líneas perfectas si no tienes buen pulso usa un pincel más chico y fino y además encinta la otra pared. Te quedan perfectas las líneas. Lo más importante acá no se vé. Antes de trabajar empapela y pone un nylon grande en el piso para no manchar nada. Y ese rodillo que uso sobre la columna hay que evitarlos. Busquen rodillos antigoteo. Abrazo grande.
Professional painters do not do any of those so called tricks. I was a union painter for forty years….
Never seen a light switch flat on a floor before to paint around ,
Excellent !👍
ustam ellerine sağlık harika olmuş :)
excelente, gracias
Dzięki, fajnie to robisz, nie jeden malarz fachowiec nie wie o takim lub niechca powiedzieć że taki patent jest
Thanks for sharing:) beautiful
Nice job.
What have you used to cover
Good!!
Congratulazioni
Even WITH the brush cut at an angle it still looks bad 😅 he just didn't reach it all the way up to the ceiling, these hacks would take more time to execute than to just be skillful at painting
Man really added unnecessary steps to life
❤Bom irmã Deus te abençoe. E mais 24 horas
That last corner trick with the messy line lol
Just losen the cover plate and do it right, job done and the paint will still form a skin...
These are the best hacks....said no painter ever
Keren cara melukisnya
Just saw this. If your plastic bottle "trick" isn't complete air tight on your expensive can of paint, you just wasted your money on the paint. And you cutting in with that flat brush....you're not even doing it right to begin with so that's why you got your overlap. Buy a quality angled brush and save yourself the time from cutting. It's amazing how some people are going to try these and they "tricks" will fail.
Amazing
The part where he heated the plastic shows that this man just like to do things the hard way 😢😂
Fantastic Job 👍🏽👍🏽🤭
I'm a painter and I don't have time for this... Maskingtape is much stronger than aluminium foil. Clean your brushes with water and a putty knife...
Putty knife 😂..soap n warm water..they make wire brushes just for cleaning your brush
Подскажите пожалуйста, как можно заделать мелкие трещины над окном, между стеной и потолком???
Акриловым герметиком, аккуратненько. Кисточкой обезпыливаете, наносите, прям в трещину, герметик, удаляете излишки, что испачкали вытираете влажной губкой. Это, если они действительно мелкие.
@@КонстантинМережко-ъ4н Спасибо вам большое. 😊
И ещё к совету Константина Мережко - Вам надо предварительно попробовать это место(с трещинами)поковырять(без усердия) Дело в том,что там где эти места заделывались и где появились трещины - может быть строителями сделано халтурно. И трещинки могут быть на"корочке"из замазки которой они свою халтуру закрыли. Если Вы просто замажете трещинки,то потом(в случае халтурной основы)эти трещинки начнут"множится"и даже это место может выпасть куском. Если же всё хорошо и место с трещинками крепкое до сделайте как Вам посоветовал Константин М.
@@ЭмильЗоля-с9с Нет. Лучше уж не ковырять. 😁 Если уж вывалится , то тогда будем думать, что делать. Спасибо.
@@ОльгаФилимонова-д7з Я бы лучше немного поковырял. Серьёзно говорю, опыт показывает, что если слишком надеяться, что всё будет хорошо, общие затраты сил и материала будут больше, чем если всё зачистить с самого начала - то, о чём говорит Эмиль Золя, вполне реальная проблема.
вот только есть большая вероятность что крышку колы после краски уже не открутишь
с вазелином хорошо откр и закрывать
Thank you so much.
Es una broma cierto, son cosas tan basicas que hasta un adolescente podria anticiparlas
Aluminium foil instead masking tape? OMG
Painters hide from you? Seriously like hiding the hair clipper from you? LoL or that you can use a broom handle on a roller? Cutting the tinfoil is something I never considered. I would just use painters tape. If I was using foil, I'd just use the already straight edge.
Good
El 90% de las cosas que aparecen en el vídeo no las he visto en mi vida, y mira que me dedico a la pintura…
I’ve never seen so much fannying about like that.
Bravo😮
Good👍thank you
Si tapas todo no es necesario recortar con la brocha, simplemente pasar el rodillo y ya