Milwaukee FastBack 6 in 1 Utility Kinfe & Screw Driver

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 56

  • @JBleauOst
    @JBleauOst Рік тому +8

    Been using this as my EDC for about a year now and I absolutely love it. It comes in handy all the time and it’s low profile enough that’s it’s never in the way on or in my pocket.

    • @GrantButler
      @GrantButler  Рік тому

      Exactly! This thing is awesome! I use it way more than I thought I would.

  • @jamesyeechunfung1432
    @jamesyeechunfung1432 3 місяці тому +1

    Your video has covered all its functional features. Thank you

    • @GrantButler
      @GrantButler  3 місяці тому

      You're welcome. Thank you for watching

  • @russell.holland
    @russell.holland 8 місяців тому +1

    This was awesome. Thank you for getting into all the subtleties of the design. I've been stuck in a rabbit hole trying to figure out which utility knife to order and your video has finally helped me settle on the Fastback 1505 (and 1500 as part of a 2-piece set). I can finally close 30 tabs now, ha ha.

    • @GrantButler
      @GrantButler  8 місяців тому

      I'm glad I could get you pointed in the right direction!

  • @adamburroughs8374
    @adamburroughs8374 9 місяців тому +1

    Excellent video. Thanks for all the details on this tool

  • @aaronmcclain1279
    @aaronmcclain1279 Рік тому +2

    Grant . I've used one for going on three years since I've been out and I bought a set of Milwaukee impact metric quarter inch bits and torx 10-20 and STD Allen bits as well .. store all my bits in small Altoids tin with the Milwaukee 6-1 I have a assorted screwdriver set . Plus I carry a Craftsman bit ratchet . I was maintenance machinist and now I work in a hospital maintenance of medical equipment.

    • @GrantButler
      @GrantButler  Рік тому

      I've been looking for a good quality little bit ratchet

    • @aaronmcclain1279
      @aaronmcclain1279 Рік тому +1

      @@GrantButler . Look at power torque from O'Reilly's or klien bit ratchet , the Craftsman is good but the switch mechanism is plastic mine broke but I carry mine and switch it with flat blade. I like it because of the 1/4 box end which is on opposite end of the ratchet end ..if there is a stuck bolt you can put the bit in the box end and break it loose . So you don't stripe the ratchet end.. I have the klien in my work bad and craftsman I carry in my edc pouch every day .

    • @aaronmcclain1279
      @aaronmcclain1279 Рік тому

      @@GrantButler Wiha 76889 32 Piece GoBox TerminatorBlue Impact Bit Set with Mini Ratchet. This is another good set I got a friend he loves

    • @GrantButler
      @GrantButler  Рік тому

      @@aaronmcclain1279 thanks, I'll check those out!

    • @aaronmcclain1279
      @aaronmcclain1279 Рік тому +1

      You welcome . Sorry I'm bit of tool nerd .

  • @nurgle-j5n
    @nurgle-j5n 5 місяців тому +1

    good video i subbed! I just got one and it's gonna be my EDC on work days. The screwdriver part feels WAY better than I assumed it would. i had no idea of that tapemeasure trick so thanks for the info.

    • @GrantButler
      @GrantButler  5 місяців тому

      Thanks for the sub! Check out my latest video, there's a few days left to enter in my 5K Subscribers giveaway!

  • @WakeNBakeBro
    @WakeNBakeBro 11 місяців тому +1

    Im curious. Okay so I see little symbols on mine. There's a bottle with the cap coming off, a razorblade, and (I assume) a head with glasses and a v shape. I understand the first 2 but what is the head picture. Been searching for like 30 minutes, maybe I'm just dumb. 😅

    • @GrantButler
      @GrantButler  11 місяців тому

      Yeah, I got nothing either 😅

    • @RBWI
      @RBWI 11 місяців тому +2

      Wear safety glasses

    • @GrantButler
      @GrantButler  11 місяців тому

      @@RBWI what do they think we're doing with this knife? 😅

    • @WakeNBakeBro
      @WakeNBakeBro 11 місяців тому +1

      @RBWI safety glasses not included

    • @donwendling7800
      @donwendling7800 8 місяців тому

      It's an arrow pointing the direction of knife exiting handle!

  • @patricioelosua5886
    @patricioelosua5886 Рік тому +1

    I see in the Milwaukee site and homedepot and they both say that it has storage for 1 extra blade. Have you seen where this compartiment is? I double checked the model and it is indeed the 1505.

    • @GrantButler
      @GrantButler  Рік тому +1

      Yes, I show it in the video

    • @patricioelosua5886
      @patricioelosua5886 Рік тому +2

      @@GrantButler my bad, i skipped a few parts of the video. Thanks tho!

  • @dougdroen7519
    @dougdroen7519 5 місяців тому +1

    I absolutely love mine This paired with the knipex cobra xs 87-100. The best EDC. If u mainly deal with bolts the 86-100 xs knipex pliers wrench would b the way to go...

    • @GrantButler
      @GrantButler  5 місяців тому

      @@dougdroen7519 I'll have to check those out! Thanks!

    • @nurgle-j5n
      @nurgle-j5n 5 місяців тому

      i want to get me a pair of those i feel like between the fastback and the mini kinipex i could save myself a lot of trips out to the truck haha

  • @atomicsmith
    @atomicsmith 11 місяців тому +2

    I like this knife too, and I want to love it. A few things hold me back. 1. The size: it’s thicker than it needs to be as you mentioned. It’s also longer than I think it should be (compare with say a gerber EAB which is much shorter. If they could get it just under 4” it would 5th pocket carry much better. 2. The liner lock on the driver is set up for lefties! I can’t understand why they did it that way. 3. The pocket clip isn’t deep carry.
    I really hope they’ll revise this design again, because I think they are very close.

    • @GrantButler
      @GrantButler  11 місяців тому

      I totally agree with all but #2 my driver I can open and close with 1 hand, right handed.

    • @atomicsmith
      @atomicsmith 11 місяців тому +2

      @@GrantButler it’s definitely possible, but it’s slower, and I usually have to think about it. My dream would be to have the driver on a button lock too!!

    • @GrantButler
      @GrantButler  11 місяців тому +1

      @@atomicsmith that'd be cool

  • @ray_c_yuen
    @ray_c_yuen 11 місяців тому +1

    I guess you can make one side matt by rubbing with some sandpaper to rough it up. My only gripe (besides the weight) is the pocket clip is not as 'deep carry' as the original Fastback (model 48-22-1500). It's deep enough, but the original was completely flush. I could file off the bottle opener as I'd never drink on the job, or worse, pull this knife out at the bar. :) great video. I will have to try squeezing two blades into that space?

    • @GrantButler
      @GrantButler  11 місяців тому

      Haha could you imagine... "no no bartender, I got this" (whips out pocket knife)
      [Audible groan is heard throughout the bar] 🤣

  • @RBWI
    @RBWI 11 місяців тому

    Anyone have a problem with the spare blade falling out? The small clip doesn’t hold it in. Any ideas for a solution/work around?

    • @GrantButler
      @GrantButler  11 місяців тому

      Is it pushed in all the way till it "clicks"? Mine hasn't fallen out

  • @rice6682
    @rice6682 Рік тому

    is the issue on the driver been resolved?

    • @GrantButler
      @GrantButler  Рік тому

      What issue?

    • @rice6682
      @rice6682 Рік тому +2

      @@GrantButler the bit fall off the driver and the ring that holds the bit gets dislodge

    • @GrantButler
      @GrantButler  Рік тому +1

      @@rice6682 oh, I had that happen once. I put it back together and never had an issue again

    • @rice6682
      @rice6682 Рік тому +1

      @@GrantButler 1 more question, is there a magnet type deiver?
      Thank you

    • @GrantButler
      @GrantButler  Рік тому +1

      @rice6682 no, there's no magnet in it.

  • @albertodijols1671
    @albertodijols1671 5 місяців тому +2

    🙏✝️🙏amen🙏✝️🙏

    • @GrantButler
      @GrantButler  5 місяців тому

      @@albertodijols1671 thank you

  • @nr3rful
    @nr3rful 11 місяців тому +2

    It was a go until you said "bottle opener ". Most usless feature.
    All bottles I know are twist off.

    • @GrantButler
      @GrantButler  11 місяців тому +1

      😅 same! I had to look pretty hard to find one that wasn't. I know its a gimmick, but so many other multi-tools do stuff like that too, so I'm not going to dismissed it entirely. It's still my favorite, and it's now my everyday carry. It's just so dang handy

  • @hetrogamr84
    @hetrogamr84 10 місяців тому

    I didn't like the commercial that played before your video.

    • @GrantButler
      @GrantButler  10 місяців тому

      I'm sorry, I have no control over the ads on my videos.

  • @death_stalker
    @death_stalker Рік тому +1

    Nice 👍🏼👍🏼

  • @cosmos7engineer
    @cosmos7engineer Рік тому +2

    This thing is contantly unavailable no matter which link I try to use, uuuuuh!

    • @GrantButler
      @GrantButler  Рік тому +2

      Sorry bro, I found mine at a local hardware store, you might try that. I think Ace hardware ships too

  • @genegreiner7766
    @genegreiner7766 4 місяці тому

    ua-cam.com/users/shortsxncSf_VODIc?si=MxLJud468w5myGWZ
    These guys have a reverse pocket clip mod for tip up carry.

    • @GrantButler
      @GrantButler  4 місяці тому

      @@genegreiner7766 neat. I like mine, I just wish it carried deeper on the pocket

    • @genegreiner7766
      @genegreiner7766 4 місяці тому

      @@GrantButler the mod does allow a deeper carry