Use code IGOR to get $100 OFF! ⚡️BUY NANROBOT: www.nanrobot.com/?ref=igor.s ⚡️ROADRUNNER (USA): roadrunnerscooters.com/?ref=igor 🙏 Affiliate links help us grow our UA-cam, we may earn a small commission to keep this channel running! 🙏
All you need to do is removing the Brake Caliper Pin then the Brake Pad Bracket and and the Inner And Outer Brake Pad should natural fall to the floor.
Igor you rock man, I just got a speedway5 and the front disk was definitely hitting some, ill have to try this tomorrow morning. You made it look as easy as can be, ty.
Wow that was so easy thank you so much brother you have the best videos please continue the great work I new to this amazing scooter life so I can use all the information I can get appreciate it bro
Hello igor. I have a the nanrobot d6+.. the only issue I am getting is flat tire for the back ( even after slime ). Can you please suggest any good quality inner tubes ?? Thanks
Got a question, I have zoom brakes, I just got new pads, a few miles in and I have to squeeze my back brake to stop do you think it has to do with the fluid. Its not squishy (air bubbles) brakes. I can pull the brakes and almost get the tire to move a bit, not like the front break. Thaks for any help.
Igor, I just purchase a varla eagle one. I have a hard time adjust the brake, is grinding the pad and working very well. Can you show me how to do it. 🙏
Hola, mi nanrobot 6+ lo compre con frenos hidraulicos, el problema que tengo es que apenas toco la palanca de frenos frena fuertisimo como si la apreara a fondo, demasiado violento. No puedo hacer un frenado sube. Se puede solucionar?
Hi there, I'm considering a D6+ or a 25ah LS7, what would you say is a better choice, I love the speed and the 25ah LS7 has same mileage as the D6+ so no problem there, also same price for me but the only problem I have is the charging times. The LS7 says it charges 8-12 hours but It doesn't tell me if that's single or dual charged, if it's like 5hours or 6hours then that'd be perfect since the D6+ is 5-3 hours depending on fast charger but if I have to wait an extra hour or 2 to get that extra speed and fun I'd be happy.
Ls7 also has 2 charging ports, so you'd get roughly the same charging times. Ls7 feels heavier, I enjoy my d6 more than the LS7. Ls7 has the speed, probably the only advange. Love the d6 suspension, ls7 suspension feels a bit too stiff for me
@@igorlmonte Thank you very much, I was at first definitely going with the D6+ but then saw that the LS7 25ah is the exact same price so I started considering but I think I might go with the LS7 due to that extra speed that I think we all love :) Have a great day or night Igor. (Also thanks for the help on the tire comment greatly appreciated.) Edit: 1 last thing would you say the 25ah and the D6+ Would have similar ranges?
Hello I found your tutorial on disc brakes very informative. My problem is that my back brakes aren’t making full contact with the disc. There should be a 1/2” wear mark on your disc from normal use . There’s only a thin line on my disc . Can you tell me how I can get pads to actually grab the disc .
Igor, I must know the answer to this question please. Why did you NOT get the Hydraulic Brakes on the D6+?? I want this scooter but I want those Hydraulic Brakes for the D6+. Thanks
Hey Eddie! I'd recommend the hydraulic. When I bought my d6+ there was only the disc version available (1st batch). I recently got a second d6+ with hydraulic brakes and I'm very happy with how effortless braking is. If you buy it from nanrobot.com and if you want to support my channel, please use my referral link: bit.ly/3725i8x take care!
I have hydraulic brakes on my new scooter my just came like that from the factory the back tire is Robin I never worked on hydraulic brakes before I do not know how to fix him I have an idea but I never done it before so can you please send me a video or teach me how to fix the hydraulic brakes because his Robin on my back tire thank you
@@sdsurvivorman you adjust the speed limit in your sitting press the mode button and the turn on bottom at the same time, while its on, and then put it on mode 8
Hey Igor, where could I purchase new break pads for my D6+? I’ve searched eBay & nanrobot websites but I can’t find any. I have the hydraulic break version by the way.
Neither set of brakes needed replacement they both had load of use left on them and On the hydraulic brakes when you put new pads in you don’t normally need to realign the calliper when you put the new pads in they won’t be sitting right so just pump the brake lever and this will allow the spring and pads to settle if this doesn’t work then you should align the calliper but try pumping the lever to settle the pads first
Im curious about this as well. My brake pads look like they have alot of life left, but still barely grabbing disk, I have tightened them so much there is almost no room left to tighten, but break pads actually look fine ! I've done about 1200km on my scoot, maybe I'm just no familiar with what worn-out brake pads look like !?
@@igorlmonte u and i have different scooter xD but this was super helpful thank you i managed to change them. it only took 10 minutes and i just finished
Use code IGOR to get $100 OFF!
⚡️BUY NANROBOT: www.nanrobot.com/?ref=igor.s
⚡️ROADRUNNER (USA): roadrunnerscooters.com/?ref=igor
🙏 Affiliate links help us grow our UA-cam, we may earn a small commission to keep this channel running! 🙏
didnt know you can remove the brake pad without removing the entire brake system!! highly informative video and very helpful. Thank you !!
Yeah, that's what NR said too (hydraulic brakes)... idk, I didn't see any reason why it wasn't possible.
All you need to do is removing the Brake Caliper Pin then the Brake Pad Bracket and and the Inner And Outer Brake Pad should natural fall to the floor.
Thanks, Igor.
You get right to the point. I’m good, now.
Igor you rock man, I just got a speedway5 and the front disk was definitely hitting some, ill have to try this tomorrow morning. You made it look as easy as can be, ty.
Muy bien explicado. Gracias.
Saludos desde España.
Wow that was so easy thank you so much brother you have the best videos please continue the great work I new to this amazing scooter life so I can use all the information I can get appreciate it bro
Thanks man!
Will you make a video on how to replace a motor please! Thank you!
Just replaced my front motor, scary to see all those wires but got the job done and it works like new..
I just changed my back motor. If u like i can send u the video
@@YungShadBeatz there's a video on roadrunner scooter here on UA-cam. I just watched it.
Thanks brother for this video. Keep uploading more videos
This is so helpful thank you😊
welcome!
Hello igor.
I have a the nanrobot d6+.. the only issue I am getting is flat tire for the back ( even after slime ).
Can you please suggest any good quality inner tubes ??
Thanks
have you tired roadrunnerscooters inner tubes? also, do you keep the proper tire pressure?
@@igorlmonte I havent tried the roadrunner inner tube and I keep my pressure 34 psi to 40 psi
Good video, thanks.
My brakes got too sharp all of a sudden. Making me stop short.
Any idea why that might happening?
Thanks
Have you have replaced rear shocks and bushings on Apollo d4 2021 edition? Good video !!
Thanks it was helpful
Great video! Could you maybe do a video on how to adjust the shocks? Thank you!
I'll make one, waiting for a special tool from Aliexpress
it works. thank you kind sir! 🙂
Awesome vid bro
Thanks man!
U should make a video on how u changed your grip tape
where do you buy brake discs pads for nanrobot
Got a question, I have zoom brakes, I just got new pads, a few miles in and I have to squeeze my back brake to stop do you think it has to do with the fluid. Its not squishy (air bubbles) brakes. I can pull the brakes and almost get the tire to move a bit, not like the front break. Thaks for any help.
Igor,
I just purchase a varla eagle one.
I have a hard time adjust the brake, is grinding the pad and working very well. Can you show me how to do it. 🙏
Where did you order rhe brake pads for the D6+
How much air psi in this scooter tires?
I have sealup 10 inches tiers
It's written on your tires. I assume 35-50 psi.
As always your explanation GREAT ..... Thank you brother...it,s too much helpful for me.. 😊
my pleasure
i need to know how to get more pad on the disk.
Hola, mi nanrobot 6+ lo compre con frenos hidraulicos, el problema que tengo es que apenas toco la palanca de frenos frena fuertisimo como si la apreara a fondo, demasiado violento. No puedo hacer un frenado sube. Se puede solucionar?
Ty very much
Hello Igor, i want to replace the break pads on my nanrobot lighting but in mine there aren't the pins that you removed... Any ideas? 🤔
Thank You
Hi there, I'm considering a D6+ or a 25ah LS7, what would you say is a better choice, I love the speed and the 25ah LS7 has same mileage as the D6+ so no problem there, also same price for me but the only problem I have is the charging times. The LS7 says it charges 8-12 hours but It doesn't tell me if that's single or dual charged, if it's like 5hours or 6hours then that'd be perfect since the D6+ is 5-3 hours depending on fast charger but if I have to wait an extra hour or 2 to get that extra speed and fun I'd be happy.
Ls7 also has 2 charging ports, so you'd get roughly the same charging times. Ls7 feels heavier, I enjoy my d6 more than the LS7. Ls7 has the speed, probably the only advange. Love the d6 suspension, ls7 suspension feels a bit too stiff for me
@@igorlmonte Thank you very much, I was at first definitely going with the D6+ but then saw that the LS7 25ah is the exact same price so I started considering but I think I might go with the LS7 due to that extra speed that I think we all love :) Have a great day or night Igor. (Also thanks for the help on the tire comment greatly appreciated.) Edit: 1 last thing would you say the 25ah and the D6+ Would have similar ranges?
Hey i just brought a used ls7 and the brakes don't grab at all. I think it's low on brake fluid but I don't know how to replace it what do I do?
Any clues on fitting zoom brakes to the front wheel of a Nanrobot d6
Hello I found your tutorial on disc brakes very informative. My problem is that my back brakes aren’t making full contact with the disc. There should be a 1/2” wear mark on your disc from normal use . There’s only a thin line on my disc . Can you tell me how I can get pads to actually grab the disc .
I did this on my D5+ and now the motor dies when applying brakes. Any idea why that would happen?
Thanks 👍 very helpful for me.
share the link for your helmet
Hey! amzn.to/3vhMGdY
Igor, I must know the answer to this question please. Why did you NOT get the Hydraulic Brakes on the D6+?? I want this scooter but I want those Hydraulic Brakes for the D6+. Thanks
Hey Eddie! I'd recommend the hydraulic. When I bought my d6+ there was only the disc version available (1st batch). I recently got a second d6+ with hydraulic brakes and I'm very happy with how effortless braking is. If you buy it from nanrobot.com and if you want to support my channel, please use my referral link: bit.ly/3725i8x take care!
Thanks Igor. I am looking to buy two of these Nanrobot scoots. The D4+ for my wife and the D6+ for me. Any discounts through your link??? ;)
Hard to find a video of the D4 plus 2.0, the brake pads are round
Do you want to replace the pads?
Hi great video it helped thank you!. I have a question where did you get your camo deck grip tape ?
Hey! Thanks. I got it on Amazon
Oh man just got mine today and waiting for it to charge(dual chargers). Tired of taking the bus to work.
I have hydraulic brakes on my new scooter my just came like that from the factory the back tire is Robin I never worked on hydraulic brakes before I do not know how to fix him I have an idea but I never done it before so can you please send me a video or teach me how to fix the hydraulic brakes because his Robin on my back tire thank you
My front wheel makes a Metallic scraping sound and when I get up to like 35+ mph the front wheel wobbles. Is this cause the breaks are too tight?
Brakes are not adjusted and also your front suspension is way too soft so it wobbles
@@igorlmonte trying to loosen those 2 hex screws but they are wayyy too tight for me. Suggestions?
Hi Igor. Love your channel! Very informative! My D6+ only go’s up to 35mph and that’s it. What do you think I should do to be able to go 40mph?
Hey! Thanks! What is your body weight? Is that GPS speed or is it what the scooters display says?
I’m 175 lbs and it’s the display.
@@sdsurvivorman you adjust the speed limit in your sitting press the mode button and the turn on bottom at the same time, while its on, and then put it on mode 8
@@cashpayne9363 Thank you Ralph.
Hey Igor, where could I purchase new break pads for my D6+? I’ve searched eBay & nanrobot websites but I can’t find any. I have the hydraulic break version by the way.
nanrobot site has them thats where I ordered mine or email them directly ask for corona free pads
Nanrobot site or Roadrunnerscooters
Neither set of brakes needed replacement they both had load of use left on them and On the hydraulic brakes when you put new pads in you don’t normally need to realign the calliper when you put the new pads in they won’t be sitting right so just pump the brake lever and this will allow the spring and pads to settle if this doesn’t work then you should align the calliper but try pumping the lever to settle the pads first
Im curious about this as well. My brake pads look like they have alot of life left, but still barely grabbing disk, I have tightened them so much there is almost no room left to tighten, but break pads actually look fine ! I've done about 1200km on my scoot, maybe I'm just no familiar with what worn-out brake pads look like !?
i wish i could just take them out but i think i need to remove the caliber
You don't need to remove the caliper
@@igorlmonte u and i have different scooter xD but this was super helpful thank you i managed to change them. it only took 10 minutes and i just finished
My scooter is making a clicking sound when I spin the wheel.
Hydraulic and Mechanical
oooooo krutoy
zaebis haha