100% easy to follow instructions. Just finished doing this on my 2013 Elantra GLS. Worked perfectly. Also, for anyone who has their Airbag light on solid and / or their Cruise Control went out, this will fix it. After installing a new OEM part (purchased from Braman Hyundai @ Miami, FL), my Cruise buttons work again and my airbag light immediately went off. Cracias señor!
Brother pude arreglar el clock spring de mi 2012 Elantra gracias a ti! El dealer quería $640 por el arreglo y el mecánico quería $300. Decidí comprar el clock spring en eBay por $18 y coji el día y aproveche que estaba caliente hoy. No fue difícil. Valió la pena hacerlo yo mismo. Solo me costo los $18 … gracias por tu ayuda brother!
Thanks! Great Video. You save me a lot of time. For anyone else looking to do this you can save a lot of money by looking up the part number under Kia. The exact same part with both a Hyundai and Kia logo on it cost about 60$ from a Kia supplier vs 200$+ from a Hyundai dealer.
@@namechane1758If a part is shared between Hyundai and Kia vehicles the number is the same. Just google the Hyundai part number and the word “Kia”. The clock spring PN is 93490.
I just bought the clock spring from my Hyundai dealer for $92. I’m a repair shop but the list price is $116 so still not terrible to have the oem part in your car
Man it worked flawless. The jacks were different than the one I got from Amazon. But I had to cut and use old ones to make them compatible. Thanks alot
Un video muy explicado, gracias a tu video pude arreglar el horn del carro de mi hija (hyundai elantra 2013) y la la luz de la bolsa de aire que estaba encendida. Gracias de nuevo
For those of you who don’t know, Hyundai has extended their warranty of the clock spring for 15 years with unlimited mileage. I have a 2011 Elantra. The airbag light came on and the horn doesn’t work. I have an appointment set up so I’ll update when it gets fixed. It should be free of charge.
@@rschmidt2471 Yeah most vehicles should qualify if the air bag light is on or the horn doesn’t work. I printed the letter out as well as the page showing my VIN number as proof just in case they want to charge me or try to get money out of me. I’m currently at the dealership right now. They said it’s about a 3 hour wait but I’ll update when I get my car back!
@@shawntholo777asmr9 oh okay, thanks for the update. My carhas both so hopefully they dont try any games. They have always been good in the past though. I hope it all works out!
This is a very late answer but meant for those who ask this in the future: With key ignition- 1. Push steering column house to the right, you’ll see it come loose from the key ignition 2. I personally put my hands around the base and a finger in the hole where the bottom screw was located 3. Pull downward and it came loose on the right side first 4. Keep left hand on base of steering column housing while relocating your right hand to a now loose/ unclipped spot of the housing 5. Focus your pull cautiously on the left side of the housing 6. Will unclip off as seen in video
Where are you located, can you fix my horn, it doesn’t work, but when I turn wheel to left or right it beeps, and my Cruze controls quit working before. Help!!!
Gracias . Primero asegúrate que el horn este bueno , pon el volante derecho y presiona el horn , si no suena , gira el volante hacia la izquierda o derecha y vuelve a presionar el horn si suena va a ser el clock spring pero como mencioné al principio, primero revisa los fusibles y el horn con un tester.
Do you think i could do this myself. I could buy the part. I am worried about not having the right tool to secure the nut in the center of the steering wheel. What is the name of the tool you used that looks like a screw driver but is big?
You could!! You don’t need to secure the steering wheel nut , before you remove the steering wheel make some marks ( you can use a chisel or whiteout ) to remember what position the steering wheel was ( the steering wheel should be straight al time )
Puedes revisar el módulo que controla los accesorios, revisa los fusibles cuidadosamente los que están dentro de la cabina , el clock spring controla la bocina , y los sistemas eléctricos si está dañado internamente es posible que no te funcione los botones del volante , en pocas palabras revisa primero los fusibles , el módulo de los accesorios y si todo estos están bien cambia el clock spring
My clock spring went out so my husband told to watch a video unfortunately I picked yours we can't understand or hear you and your methods and advice were terrible my husband who is a mechanic was disgusted with you 😮😢
100% easy to follow instructions. Just finished doing this on my 2013 Elantra GLS. Worked perfectly.
Also, for anyone who has their Airbag light on solid and / or their Cruise Control went out, this will fix it. After installing a new OEM part (purchased from Braman Hyundai @ Miami, FL), my Cruise buttons work again and my airbag light immediately went off. Cracias señor!
Brother pude arreglar el clock spring de mi 2012 Elantra gracias a ti! El dealer quería $640 por el arreglo y el mecánico quería $300. Decidí comprar el clock spring en eBay por $18 y coji el día y aproveche que estaba caliente hoy. No fue difícil. Valió la pena hacerlo yo mismo. Solo me costo los $18 … gracias por tu ayuda brother!
Que bueno que pude ayudarte a ahorra ese dinero bro. Ya sabes estamos aquí para ayudar 👍 y muchas gracias por mirar uno de mis videos 😆
@@fixitquick la luz de la Air Bag se apaga enseguida que lo cambias o hay que resetearlo???
@@georgesilveira4936 tienes que borrar los códigos
So thankful for this video. My horn works perfectly. It’s easy to do. Follow the instructions and you’ll be just fine!
This video was very helpful I changed my clock spring and my horn works thanks!
This explanation, is going to save me from dealer repair cost😊I am handy with my car and will do the job mi self!! Gracias amigo"😂
Thanks! Great Video. You save me a lot of time. For anyone else looking to do this you can save a lot of money by looking up the part number under Kia. The exact same part with both a Hyundai and Kia logo on it cost about 60$ from a Kia supplier vs 200$+ from a Hyundai dealer.
Why not tell us the part number
@@namechane1758If a part is shared between Hyundai and Kia vehicles the number is the same. Just google the Hyundai part number and the word “Kia”. The clock spring PN is 93490.
I just bought the clock spring from my Hyundai dealer for $92. I’m a repair shop but the list price is $116 so still not terrible to have the oem part in your car
@@namechane1758 Probably too late, but for my 2013 Elantra GT the Kia part number was 934901W120 and cost about half of what the Hyundai part cost.
Thanks for this tip! Saved me over $100 US!
Thank you so much! Worked like a charm on my 2015!
Man it worked flawless. The jacks were different than the one I got from Amazon. But I had to cut and use old ones to make them compatible. Thanks alot
I tested the relays and fuses. All seem fine. This will be my next step! Gracias por su ayuda!
Un video muy explicado, gracias a tu video pude arreglar el horn del carro de mi hija (hyundai elantra 2013) y la la luz de la bolsa de aire que estaba encendida. Gracias de nuevo
For those of you who don’t know, Hyundai has extended their warranty of the clock spring for 15 years with unlimited mileage. I have a 2011 Elantra. The airbag light came on and the horn doesn’t work. I have an appointment set up so I’ll update when it gets fixed. It should be free of charge.
Hey Shawn, any update?
@@rschmidt2471 not yet but I have an appointment this Saturday at the dealer. I’ll let you know what happens :)
@@shawntholo777asmr9 Oh okay, got ya. Thanks! According to Hyundai's website my car qualifies for the extended coverage so I'll be calling them soon.
@@rschmidt2471 Yeah most vehicles should qualify if the air bag light is on or the horn doesn’t work. I printed the letter out as well as the page showing my VIN number as proof just in case they want to charge me or try to get money out of me. I’m currently at the dealership right now. They said it’s about a 3 hour wait but I’ll update when I get my car back!
@@shawntholo777asmr9 oh okay, thanks for the update. My carhas both so hopefully they dont try any games. They have always been good in the past though. I hope it all works out!
Great video thanks for the detailed step by step instructions.
Thank you, i fixed it myself using this video!
I like the video it's help a lot thank you very much
Great job making the video and explaining the job - super helpful. Thank you!
Thks brother, nice video I just changed my (muchas Gracias )
Would this be the same with an Elantra that uses the key and isn’t push start?
This is a very late answer but meant for those who ask this in the future:
With key ignition-
1. Push steering column house to the right, you’ll see it come loose from the key ignition
2. I personally put my hands around the base and a finger in the hole where the bottom screw was located
3. Pull downward and it came loose on the right side first
4. Keep left hand on base of steering column housing while relocating your right hand to a now loose/ unclipped spot of the housing
5. Focus your pull cautiously on the left side of the housing
6. Will unclip off as seen in video
Very detailed video. Thank you for sharing it!
Thanks for the video. Really helped
It is possible to replace Steering wheel of Tuscon 2008 ( with Crous Control) with Tucson 2013-14 mode? And how could connect wires ?
Where are you located, can you fix my horn, it doesn’t work, but when I turn wheel to left or right it beeps, and my Cruze controls quit working before. Help!!!
Good work thank you
Best video so far
amazing. Thanks for
Good work
I read the same on the recall. Same thing no horn and airbag light. My appt is not till Oct 30. I will update on what transpires.
Thank you so much!!!
You’re welcome I’m here to help 👍
Buen video man
Tengo un problema con el Horn de mi Hundai Elantra 2011
¿Es esa pieza es la que se debe cambiar?
Gracias . Primero asegúrate que el horn este bueno , pon el volante derecho y presiona el horn , si no suena , gira el volante hacia la izquierda o derecha y vuelve a presionar el horn si suena va a ser el clock spring pero como mencioné al principio, primero revisa los fusibles y el horn con un tester.
Thanks works for me 👍
Do you think i could do this myself. I could buy the part. I am worried about not having the right tool to secure the nut in the center of the steering wheel. What is the name of the tool you used that looks like a screw driver but is big?
You could!! You don’t need to secure the steering wheel nut , before you remove the steering wheel make some marks ( you can use a chisel or whiteout ) to remember what position the steering wheel was ( the steering wheel should be straight al time )
I just changed it, the cruise control is back on, but the horn still doesn't work, and the air bag is on, what could be the reason; Thanks,
Is your air bag still light on?
So the clockspring for a 2015 is the same as the ones they used in 2013?
Yes
So helpful 🙏 Thanks
What is the part no. of this clock spring for 2011 model
Part Number: 93490-3Q120
@@fixitquick Thank you
My controls aren’t working on my 13 Elantra
En hiunday elantra 2011 no funciona ninguno boton ni de radio ni crucero ni reset será misma pieza q cambiar gracias x contestar
Puedes revisar el módulo que controla los accesorios, revisa los fusibles cuidadosamente los que están dentro de la cabina , el clock spring controla la bocina , y los sistemas eléctricos si está dañado internamente es posible que no te funcione los botones del volante , en pocas palabras revisa primero los fusibles , el módulo de los accesorios y si todo estos están bien cambia el clock spring
my volume button is not working. is it because of the clockspring also?
No , could be the radio or the steering wheel that are damaged
Yes, both my radio and cruise controls were gone due to this part,seems to be a common issue
What's the part number
Can give me the parts name and parts number please.
My clock spring went out so my husband told to watch a video unfortunately I picked yours we can't understand or hear you and your methods and advice were terrible my husband who is a mechanic was disgusted with you 😮😢
Why didn’t your husband replace it if he’s a mechanic? What a weird comment
😂😂😂
@Blac😂😂😂k_Jesus69
No era mejor marcarlo con un marcador 🤔🤔🤔🤔
Si tienes uno a la mano si 😂
De una u otra forma está bien 👍